• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.111-120
• /
• 2009

This paper presents a fundamental findings of the functional and structural performance of the porous asphalt concrete coated with MMA resin. To evaluate the structural performance, cantabro, wheel tracking, moisture sensitivity and indirect tensile fatigue tests are performed. The tests results show that the cantabro loss is reduced three times and fatigue resistance is significantly increased after the specimens are coated with MMA resin. However there are little changes in the rutting and moisture damage resistances before and after the coating. Air voids, permeability and BPT(British Pendulum Test) tests are conducted to study the functional performance. It is observed form the tests that the air voids and permeability are slightly decreased after the coating. However, the changes in the air voids and permeability are negligible. The skid resistance of the coated specimens is lower than reference specimens. However, the skid resistance is maintained beyond the level of the reference specimens when silica sands are chipped on top of the coated surface.

• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.730-736
• /
• 2015

Tomato spotted wilt virus (TSWV) causes one of the most destructive viral diseases that threatens global tomato production. Sw-5b was reported as the resistance gene effective against TSWV. The objective of this research was to develop a single-nucleotide polymorphism (SNP) marker to distinguish tomato cultivars resistant to TSWV from susceptible cultivars for marker-assisted breeding. First, we determined genotypes for TSWV resistance in 32 commercial tomato cultivars using the previously reported Sw-5b gene-based marker. Then, DNA sequences of Sw-5b alleles in tomato cultivars showing resistant or susceptible genotypes were analyzed; a single SNP was found to distinguish tomato cultivars resistant to TSWV from susceptible cultivars. Based on the confirmed SNP, a SNP primer pair was designed. Using this new SNP sequence and high-resolution melting analysis, the same 32 tomato cultivars were screened. The results were perfectly correlated with those from screening with the Sw-5b gene-based marker. These results indicate that the SNP maker developed in this study will be useful for better tracking of resistance to TSWV in tomato breeding.

• International Journal of Highway Engineering
• /
• v.6 no.2 s.20
• /
• pp.1-13
• /
• 2004

This study dealt with size effect of specimen in measuring deformation strength and estimating rut resistance of asphalt concretes under static loading using Kim test. Two aggregates, a normal asphalt (pen 60-80) and 6 polymer-modified asphalt (PMA) binders were used for preparation of 14 dense-graded mixtures. Mixtures were prepared based on optimum asphalt content by Marshall compactor (S= 10cm) and gyratory compactor (S= 15cm) for Kim test and for wheel tracking test. In statistical analysis by general linear model (GLM) procedure of SAS, the diameter of specimen was found not to be a significant factor that affect the Kim test result. Therefore, it was found that either loom-diameter or 15cm-diameter of specimen gave no significant difference in deformation strength ($K_D$) values in Kim test for any aggregate mixture. However, the thickness of specimen was found to be a significant factor in determining $K_D$. It is estimated that $K_D$ is a function of y, vertical deformation, and y has something to do with thickness of specimen. Therefore, it is suggested that the thickness of specimen should not be higher than 6.6cm, and the correction factor depending on the thickness value should be developed in the future study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.259-259
• /
• 2009

Surface contamination and leakage current have caused operating problems. A flashover in a substation may result in destruction of an insulator or many others electrical equipment. Engineering plastics have good characteristic (light weight, good productivity and little of void) as compare with epoxy or porcelain insulators. Outdoor insulator must have resistance to contamination. However, they are not suited to outdoor insulator by reason of being not good hydrophobic. RTV has a good property of hydrophobic and ATH has characteristic obstructing exothermic reaction. In order to reduce the incidence of insulator flashover and damage, the silicon rubber contained nano size ATH coat on surface of engineering plastics. In this paper, it compares resistance tracking of the engineering plastic coated RTV with that of non-coated engineering plastic and ATH filled composites performed much better than non-filled composites.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.477-482
• /
• 2001

To realize higher track density of HDD, the servo bandwidth should be higher, however, is limited by the mechanical resonances of the arm, coil of the VCM and ball bearing pivot. The dual-stage actuator systems have been suggested as a possible solution. For the dual-stage actuator systems based on the suspension, the suspension resonance frequencies in the radial access direction are important factors to increase a servo bandwidth, however the improvement of these frequencies may affect the shock resistance performance and spring constant. The slider's flying stability can be deteriorated by the change of a vertical stiffness. In this work, we have investigated a suspension design scheme possessing a milliactuator for dual-stage actuator systems and also achieved higher mechanical characteristics. Design parameters are deduced by finite element analysis with sensitivity function. It is confirmed that the proposed suspension with the milliactuator has the capability of fine tracking motion, due to its hinge structure on the spring region, and achieves higher mechanical resonance frequencies in the radial access direction with a high-shock resistance and a low-spring constant.

• Resources Recycling
• /
• v.7 no.2
• /
• pp.53-58
• /
• 1998

Wheel tracking and ravelling tests were conducted on the hot mix crumb rubber modified asphalt concrete usmg waste tire t to evaluate the mechanical prope$\pi$ies in comparison with conventional asphalt concrete. According to the test results, the m modified product, lias superior to the conventional one by 50% in the resistance of permanent deformation and by 15% in the m resistance of dmability. The experimental results should recommend thut the waste tir$\xi$ is positively recycled for asphak concrete.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.2
• /
• pp.125-132
• /
• 2022

The prevalence of multidrug-resistant TB (MDR-TB) and extensively drug-resistant TB (XDR-TB) are increasing. We analyzed the patterns of drug resistance and tracking period days of acquiring anti-mycobacterial resistance. From January 2010 to December 2019, drug susceptibility tests (DST) were performed by the absolute concentration method using the Löwenstein-Jensen solid medium and pyrazinamidase activity test (to assess pyrazinamide resistance) in samples from patients who were referred to the Green Cross Laboratories in Yongin. Among the cases that showed resistance to one or more anti-tuberculosis drugs, 55 patients (33.1%) were resistant to isoniazid (INH) at the time of initial referral, and the rates for the development of resistant anti-tuberculosis drugs were ethambutol (EMB) (26.6%), rifampicin (RFP) (21.9%), quinolones (QUI) (21.9%) and pyrazinamide (PZA) (10.9%), in that order. In the cases sensitive to all 10 anti-tuberculosis drugs initially, the development of resistance to INH was the most frequent, seen in 43 patients (7.2%). The average follow-up period was 435.6 days, and the resistance development was observed in the order of INH (7.2%), RFP (3.9%), SM (1.9%), QUI (0.7%), amikacin (AMK) (0.5%), and EMB (0.5%). The conversion of susceptible strains to resistant strains is an important warning sign for the patient, especially in cases of conversion to MDR or XDR. This information would be helpful for improving patient care during TB treatment.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.135-139
• /
• 2012

A digital controller can simply realize a complex operation algorithm and power control process which can not be applied by an analog circuit for a solar array regulator(SAR). The digital resistive control(DRC) makes an equivalent input impedance of the SAR be resistive characteristic. The resistance of the solar array varies largely in a voltage source region and slightly in a current source region. Therefore when the solar array regulator is controlled by the DRC, the Advanced Incremental Conductance MPPT Algorithm with a Variable Step Size(AIC-MPPT-VSS) is suitable. The AIC-MPPT-VSS, however, using small signal resistance and large signal resistance of the solar array can not limit the absolute value of the solar array power. In this paper, the solar array power limiter is suggested and the BUCK-BOOST type SAR which is fully controlled by the digital controller is verified by simulation.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1648-1650
• /
• 1999

In the present study. we investigated the role of fillers, alumina trihydrate (ATH) and calcined clay, on the mechanical and electrical properties of EPDM compounds. Mechanical properties and tracking resistance improved with increasing ATH fillers. whereas volume resistivity, tan$\delta$ and dielectric constant decreased when ATH was replaced by clay filler. Futhermore, it was more prominent in $90^{\circ}C$ hot water test. This was explained with polarity of ATH, and the smaller particle size of ATH filler than clay filler.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.6-10
• /
• 2003

In our country, the housing materials of polymeric outdoor insulators have mainly been used EPDM or silicone rubber. EPDM housing materials had been widely used in the field for the first time. The reason why silicone has the high cost of production. But recently, most of the manufacturers that newly developed polymeric insulators make its choice of silicone housing. EPDM showed a good resistance to tracking. We compared the various characteristics for EPDM and silicone insulators that have similar type and design. Silicone insulators have more performance in flashover voltage test and leakage current measurement because of a good water repellent than EPDM ones. Also, the property of EPDM compared with silicone insulators greatly decreased after aging test in combined acceleration ageing facilities for 1000 hours.