• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4733-4739
• /
• 2012

While traditional two-axis tracking systems with double sensors had been using two sensors to control azimuth and elevation angle of the sun so that a solar cell module would make a normal line with the sun, this paper proposed a new two-axis system that can achieve the same performance with only one sensor in it. It is Two-axis tracking system that control azimuth and elevation to control to be reduced for solar cell module as proposed tracking system uses 1 sensors and the sun always forms normal. Two-axis tracking system of one sensor method that propose in paper that could reduce electric power consumption and sees than fixed type preventing action and the most efficient driving and needless drive could confirm that generation efficiency of about 23 [%] increases. To heighten efficiency of solar cell doing to receive more sunlights chasing the sun, done tracking device have proceeded a lot of studies in large size way. Therefore, is expected that will do big part in the sun tracking supply through utility study about persistent generation efficiency constructing monitoring system of the sun tracking of this paper.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.185-186
• /
• 2016

Maximum power point tracking (MPPT) techniques play a big role in improving the efficiency of photovoltaic (PV) system. Among various schemes, the incremental conductance (INC) method is mostly discussed in literature because of its fast response to the rapid irradiation changes and high tracking accuracy. However, the existing INC algorithm has trade-offs between fast dynamic response and steady state stability. This study proposes a novel INC method to meet high efficiency and fast tracking performance at the same time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2139-2144
• /
• 2013

This paper has analyzed the possibility about implementation of the low-cost, high-efficiency tracking antenna using flat panel antenna. Tracking antenna is consisted of four flat-antenna, comparators, tracking receiver, controller. We analyzed input signal of antenna array about the magnitude and phase of radio wave. In addition, We suggested the available tracking range through the analysis of output signal. We have minimized the error rate that happened on two path through design two path of the azimuth and elevation. Analysis results has a tracking range of ${\pm}3$ degrees, it is possible to implement.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1197-1220
• /
• 2014

Accurate actuator tracking is critical to achieve reliable real-time hybrid simulation results for earthquake engineering research. The frequency-domain evaluation approach provides an innovative way for more quantitative post-simulation evaluation of actuator tracking errors compared with existing time domain based techniques. Utilizing the Fast Fourier Transform the approach analyzes the actuator error in terms of amplitude and phrase errors. Existing application of the approach requires using the complete length of the experimental data. To improve the computational efficiency, two techniques including data decimation and frequency decimation are analyzed to reduce the amount of data involved in the frequency-domain evaluation. The presented study aims to enhance the computational efficiency of the approach in order to utilize it for future on-line actuator tracking evaluation. Both computational simulation and laboratory experimental results are analyzed and recommendations on the two decimation factors are provided based on the findings from this study.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.330-332
• /
• 2006

In this paper, sun tracking system using Sun position sensor is proposed, the sun tracking system designed as which raises the efficiency of solar power generation. It design the structure being simple and it develops the system which is economical efficiency. It develops the hazard technique such as location tracking method of the sun which uses the sensor and to use the motor solar cell module movement. The Sun tracking system makes the drive in order to do with one axis and to use the sensor and to know in order to put out, the location of the sun and it makes. To make the solar location tracking sensor where the structure is simple it used two solar cells.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.222-224
• /
• 2009

This paper proposes analysis data of generation efficiency with tracking method for solar tracking. Tracking algorithm of PV generation is divided the sensor method and program method. Generation efficiency is analyzed the three cases 1-high insolation, 2-low insolation, 3-rapidly changing insolation. Proposed data is possible to apply for development of novel algorithm with hybrid tracking method in this paper. Hereby, This paper is proved the benefit of analyzed data.

• KIEAE Journal
• /
• v.12 no.1
• /
• pp.113-118
• /
• 2012

The photovoltaic is one of the most important sustainable technologies appliable to architectures. The power performance mainly depends on the installation conditions of them. This study aims to evaluate the power performance of photovoltaic system by the installation conditions, the tracking methods and reflecting mirrors. For the study, the Solar Pro computer simulations have been conducted on installation angles, solar azimuth and solar altitude. Also, the field mock-up tests are performed to of its application to verify the simulation results. Both the results of the experiment and the simulation have proved that the efficiency of 90-degree fixed angle method was higher than that of 30-degree fixed angle, the efficiency of altitude tracking was better than that of azimuth tracking method, and changing both the altitude and the azimuth together is more efficient rather than the shortened tracing way. In addition, the light-concentrating method in which the incidence angle of the sun is controlled by an adhered reflector has been analyzed to have better efficiency than the general method of tracing according to the orbit of the sun. Therefore, this thesis is expected to offer the basic data to set a more effective tracing-type of photovoltaic power generation system in the future. For this, more researches are to be conducted hereafter on a high efficiency drive motor and the establishment of an economic system.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.219-221
• /
• 2009

This paper analyzes efficiency of photovoltaic(PV) tracking system using solar location algorithm(SLA). Solar location tracking system is needed for efficiently and intensively using PV system independent of environmental condition. PV tracking system of program method is presented a high tracking accuracy without the wrong operating in rapidly changed insolation by the clouds and atmospheric condition. Therefore, this paper analyzes efficiency of PV system using SLA for more correct position tracking of solar. Also, controlled altitude angle and azimuth angle by applied algorithm is compared with data of korea astronomy observatory. And this paper analyzes the tracking error and proves the validity of applied algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.3
• /
• pp.40-47
• /
• 2009

This paper presents new drain bias scheme for the linearity enhancement of envelope tacking power amplifiers for W-CDMA base-stations. In the conventional envelope tracking power amplifiers, the drain bias voltage is lowered close to the knee voltage of transistor, resulting in the severe linearity degradation. To solve this problem, it is proposed in this paper that the amplifier is biased in the conventional class AB mode with a fixed drain bias voltage if the input envelope is low and in the envelope tracking mode otherwise. Moreover, the drain bias in the envelope tracking mode is newly determined to minimized the distortion. To verify the effectiveness of the proposed bias scheme, simulation is performed on the W-CDMA based-station envelope tracking power amplifier using class AB Si-LDMOS power amplifier. It is shown from the simulation that the proposed bias scheme allows a drastic linearity enhancement with the comparable efficiency enough to meet the requirement of W-CDMA base-station without additional linearization techniques.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.108-113
• /
• 1991

In this paper, an improved method for tracking maneuvering target is proposed. The proposed tracking filter is constructed by combining the input estimation approach with the variable dimension filtering approach. In this approach, the filter also provides the estimated time instant at which target starts maneuver, when the target maneuver is detected. Using this estimated maneuvering time, the maneuver input is estimated and the tracking system changes to the maneuver model. Simulations are performed to demonstrate the efficiency of the proposed tracking filter.