• 헤리티지:역사와 과학
• /
• 제53권1호
• /
• pp.88-105
• /
• 2020

이 글에서는 신라 황복사지(皇福寺址) 동편 폐고분지(廢古墳址)의 성격에 대한 기존의 제설(諸說)을 검토하고 최근 실시된 발굴조사 결과를 종합하여 고고학적인 접근을 시도해 보았다. 고찰 결과 다음과 같은 연구 성과를 얻을 수 있었다. 첫째, 신라 황복사지 동편 논 경작지 지면에 노출되어 있었던 원형의 거석(巨石)들은 발굴조사 결과 모두 전면(前面)이 호형(弧形)으로 가공된 왕릉(王陵)의 호석(護石)이었다. 이 왕릉의 호석들은 대부분 후대 경작으로 인해 원위치에서 이탈되어 있었고, 일부는 통일신라시대에 조성된 건물의 담장이나 기단 등의 건축부재로 재활용된 상태였다. 이러한 사실은 당시 신라의 계세관념(繼世觀念)과 골품체제(骨品體制) 및 왕실의 권위를 감안할 때 인위적으로 능묘(陵墓)를 파괴한 후의 상황은 아닐 것이다. 따라서 이 왕릉의 석재는 당시 왕의 능원(陵園)이 조영되던 중 어떠한 이유로 인해 미처 완성되지 못하고 방치되어 오다가 후대에 자연스럽게 건물지의 부재로 재활용되었을 것으로 추정된다. 둘째, 구황동(九黃洞)왕릉지 탱석(撑石)의 규모와 암질(岩質)을 비교·분석한 결과 능지탑지(陵只塔址)에 복원되어 있는 십이지신상(十二支神像) 탱석들과 동일한 왕릉의 호석이라는 점이 확인되었다. 이로 인해 황복사지 십이지신상 호석은 또 다른 왕릉의 호석이라는 점이 확인된 것이다. 따라서 그동안 황복사지 십이지신상 호석이 구황동왕릉지에서 옮겨왔을 것이라는 일반적인 학계의 견해는 수정이 불가피하게 되었다. 셋째, 호석의 구조와 능묘 형식으로 본 구황동왕릉지의 피장자(被葬者)는 흥덕왕보다는 늦고, 전(傳)경덕왕릉의 피장자와는 비슷하며, 전(傳)김유신묘의 피장자보다는 앞선 시기의 왕 중에서 찾아진다. 또한 능지탑지로 옮겨진 십이지신상 탱석의 미술사적 형식을 감안해 보더라도 구황동왕릉지의 피장자는 9세기대의 신라 하대 왕 중에서 비정되는 것이 합리적일 것으로 생각된다.

• 에너지공학
• /
• 제11권1호
• /
• pp.1-9
• /
• 2002

우리나라에 보급된 축냉시스템 이용효율 향상과 전력사용 합리화 방안을 제시함으로써 빙축열 시스템의 보급활성화를 통한 하절기 피크부하 경감에 기여코자 빙축열 설비의 성능시험을 실시한 결과 COP주간 3.8, 축열 3.0대비 30% 이상 성능이 감퇴한 주간 2.6∼3.4, 축열 2.1∼3.0정도로 냉동기가 가동되고 있으며, 축열율은 15개 건물 중 3개 건물(21.4%)만이 축열능력 대비 40% 이상의 축열을 실시하고 있는 것으로 분석되었다. 이처럼 운전성능 감퇴를 개선하기 위하여는 축냉(빙축열)설비 운전시 빈번히 발생하는 3-Way 밸브오동작, 냉각능력 감소, 팽창밸브 동작 부적절, 운전모드별 제어설정 오류 등에 의한 축냉능력 감퇴현상을 시정하고, 냉동기의 브라인배관 By-pass, Ice Slurry system운전모드별 배관분리, 냉온수펌프의 회전수제어 등의 배관계통 개선검토가 필요하며, 축냉(비축열) 시스템특징 별로는 Ice on Coil system은 냉방부하 확장성에 제약, Ice Ball system은 축열조의 수밀유지, Ice lens system의 제빙운전시 COP 저하, Ice Slurry system은 주간 운전시 저온운전에 따른 낮은 COP, Ice Harvest system은 Hot Gas 탈빙으로 동력손실증가 등에 대한 개선이 향후 축냉(빙축열)시스템의 운전성능 향상을 위해 필요한 것으로 도출되었다.

• Journal of Nutrition and Health
• /
• 제36권1호
• /
• pp.83-92
• /
• 2003

Improving dietary patterns, na, in turn, improving nutritional status, is now viewed as a key to improve public health and to prevent chronic diseases. There has been a peat needs to assess diet quality to identify nutritional risk group, however, little research has been done on methods to assess overall diet quality. The purpose of this study was to develope a mini dietary assessment (MDA) index for evaluation of overall dietary quality. A 10-component system was devised based on dietary guidelines and food Tower for Koreans. The system contained 4 food elements of which use is encouraged, such as milk, meat, vegetables, fruits, and 3 food elements of which use is limited, such as fat, salt, or sugar. Also the included were elements on dietary regulation and variety. A subject is to check one of ‘always' 'generally'seldom', which has score of 5, 3, and 1, respectively, so the total possible index score is 50. This index is to use without dietary survey and is to use even by non-nutritionist. A sample of 432 healthy males and females in their 30's and 40's contributed diet intake data based on 24-hour recall for the validation of MDA. The mean MDA score was 31.34 of a possible 50 points. The main nutrients for each MDA component was correlated very well with the results of 24-hour recall. Also, very good correlation was found between healthy eating index (HEI) score and MDA score. However, some of MDA components were needed a modification of term or/and statement. So the Uh was revised and another effort for validation was made with new sample of 169 subjects and even better correlation was found. The revised MDA could be used with minor modification to assess diet quality and to screen nutritional status. (Korean J Nutrition 36(1): 83-92, 2003)

• 대한기계학회논문집A
• /
• 제38권6호
• /
• pp.691-698
• /
• 2014

본 논문에서는 복합재료를 이용하여 플렉스빔과 토크튜브를 제작하기 위한 공정과 기본 물리량 시험과정을 소개하였다. 플렉스빔과 토크튜브는 헬리콥터에 적용되는 무베어링 로터 허브 시스템을 구성하기 위한 핵심 구성품이다. 토크튜브는 블레이드의 피치각을 변화시키기 위한 조종력을 전달하며, 플렉스빔은 구조적인 변형을 통해 플랩, 래그 및 페더링 힌지를 구현하는 기능을 담당한다. 지상회전시험을 수행하기에 앞서 플렉스빔과 토크튜브 및 블레이드의 플랩강성, 래그강성 및 토션강성을 측정하기 위한 기본 물리량 시험을 수행하였다. 또한, 해석을 통해 예측된 단면 강성과 기본 물리량을 통해 획득된 강성 값을 비교하였으며, 그 결과를 통해 복합재료로 제작된 플렉스빔과 토크튜브가 구조적인 강성 요구도를 만족함을 확인할 수 있었다.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.295-328
• /
• 2015

In recent years the monitoring of structural behavior through acquisition of vibrational data has become common practice. In addition, recent advances in sensor development have made the collection of diverse dynamic information feasible. Other than the commonly collected acceleration information, Global Position System (GPS) receivers and non-contact, optical techniques have also allowed for the synchronous collection of highly accurate displacement data. The fusion of this heterogeneous information is crucial for the successful monitoring and control of structural systems especially when aiming at real-time estimation. This task is not a straightforward one as measurements are inevitably corrupted with some percentage of noise, often leading to imprecise estimation. Quite commonly, the presence of noise in acceleration signals results in drifting estimates of displacement states, as a result of numerical integration. In this study, a new approach based on a time domain identification method, namely the Unscented Kalman Filter (UKF), is proposed for correcting the "drift effect" in displacement or rotation estimates in an online manner, i.e., on the fly as data is attained. The method relies on the introduction of artificial white noise (WN) observations into the filter equations, which is shown to achieve an online correction of the drift issue, thus yielding highly accurate motion data. The proposed approach is demonstrated for two cases; firstly, the illustrative example of a single degree of freedom linear oscillator is examined, where availability of acceleration measurements is exclusively assumed. Secondly, a field inspired implementation is presented for the torsional identification of a tall tower structure, where acceleration measurements are obtained at a high sampling rate and non-collocated GPS displacement measurements are assumed available at a lower sampling rate. A multi-rate Kalman Filter is incorporated into the analysis in order to successfully fuse data sampled at different rates.

• Advances in environmental research
• /
• 제4권3호
• /
• pp.155-172
• /
• 2015

In this study, a complete set of recirculating cooling water system and the required instruments were built in a semi-industrial-scale and a 50 g/h ozone generation plant and a chlorine system were designed for cooling water treatment. Both chlorination and ozonation treatment methods were studied and the results were analyzed during two 45-days periods. The concentrations of ozone and chlorine in recirculating water were constant at 0.1 mg/lit and 0.6 mg/lit, respectively. In ozone treatment, by increasing the concentration cycle to 33%, the total water consumption decreased by 26% while 11.5% higher energy efficiency achieved thanks to a better elimination of bio-films. In case of Carbon Steel, the corrosion rate reached to 0.012 mm/yr and 0.025 mm/yr for the ozonation and chlorination processes, respectively. Furthermore, consumptions of the anti-corrosion and anti-sedimentation materials in the ozone cooling water treatment were reduced about 60% without using any oxidant and non-oxidant biocides. No significant changes in sediment load were seen in ozonation compared to chlorination. The Chemical Oxygen Demand of the blow-down in ozonation method decreased to one-sixth of that in the chlorination method. Moreover, the soluble iron and water turbidity in the ozonation method were reduced by 97.5% and 70%, respectively. Although no anaerobic bacteria were seen in the cooling water at the proper concentration range of ozone and chlorine, the aerobic bacteria in chlorine and ozone treatment methods were 900 and 200 CFU/ml, respectively. The results showed that the payback time for the ozone treatment is about 2.6 years.

• KIEAE Journal
• /
• 제15권3호
• /
• pp.37-42
• /
• 2015

Purpose: Apartment is a typical residential type in Korea. In the past, apartment types were very monotonous. But today, the types of complex are changed because personal needs have been diversified and personalized. In order to meet those needs, construction companies are constructing various types of apartments. The more apartment types are diverse, the more the energy problems are taken place. So, the purpose of this study is to solve the problem of energy gap in the same complex through improving the thermal transmittance of wall. Method: Heating energy consumption of Building Energy Efficiency Rating System and heating energy usage of apartment show a similar trend on the graph. In order to identify the best position of heating energy consumption difference reduction, we change the building's U-value of front, back, side walls. Result: In the A complex, maximum and minimum heating energy consumption building's shapes are flat. the best efficiency is side U-value change and the worst is front change. In the E complex, maximum heating energy consumption building's shape is tower and minimum building shape is flat. Consequently, the front and back wall performance change was little effect to reduce energy gap, while the change of side wall's U-value show the great reduction between building's energy consumptions.

• 한국환경과학회지
• /
• 제7권3호
• /
• pp.335-348
• /
• 1998

The intensive meteorological observations including pibal balloon at Ungcheon, airsonde and 10m meteorological tower observations at Gulup-Do, where are located In the western coastal region, are taken to Investigate the characteristics of the upper and lower atmospheric structure and the local circulation pattern during the period of 17 to 22 September 1996. The diurnal variations of weather elements(i.e. air temperature, humidity, pressure, and Und speeds at Gulup-Do are analyzed and discussed with those at four inland meteorological stations. The vertical profiles of wind vector, ortho- gonality(Ω), and shear obtained from the pibal obsenrations are also presented to examine the change of wand structure according to the synoptic-scale pressure system's movement. The diurnal temperature changes at Gulup-Do are more sensitive than that of Inland meteorological stations In case of the mow of southwesterlies but are not dominant due to the ocean effect under the Influence of relatively cold northerlies. A well defined mixed layer Is developed from the 500m to the maximum 1700m with a significant capping Inversion layer on the top of it. It can be found from the vertical profiles of wind vector that the wind become generally strong at the interface heights between cloud lay- ers and non-cloud layers. The maximum Und shear Is appeared at the bel각t where the varlauon of wand direction Induced by the passage of synoptic-scale pressure system Is accompanied with the In- crease of Und speed. Based on the wind orthogonality, the change of wind direction with height is more complicated In cloudy day than In clear day. In case of a fair weather, the change of wand direction is showed to be at around 2km.

• 대한기계학회논문집A
• /
• 제36권7호
• /
• pp.731-738
• /
• 2012

본 논문은 상용 유한요소코드인 ANSYS Workbench 12.1과 CFX 12.1을 이용하여 NREL Phase VI Rotor에 대한 공력특성을 입구풍속 7m/s 경우에 대해 연구하였다. 공탄성 효과를 고려하기 위해 약결합 양방향 유체구조 연성기법을 사용하여 타워구조를 제외한 로터파트에 대해서 해석이 수행되었다. 블레이드 끝단의 초기 피치각은 $3^{\circ}$로 설정하였고, 구조해석모델은 등가강성기법을 적용하였다. 신뢰성 있는 수렴판정 결과의 확보를 위해 블레이드 루터부의 굽힘모멘트를 실시간으로 모니터링 하였다. 해석의 신뢰성을 검증하기 위하여 해석결과를 NREL/NASA Ames 풍동 실험결과와 비교 분석하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1144-1153
• /
• 2015

The resonant mechanism of reradiation interference (RRI) over 1.7MHz from power transmission lines cannot be obtained from IEEE standards, which are based on researches of field intensity. Hence, the resonance is ignored in National Standards of protecting distance between UHV power lines and radio stations in China, which would result in an excessive redundancy of protecting distance. Therefore, based on the generalized resonance theory, we proposed the idea of applying model-based parameter estimation (MBPE) to estimate the generalized resonance frequency of electrically large scattering objects. We also deduced equation expressions of the generalized resonance frequency and its quality factor Q in a lossy open electromagnetic system, i.e. an antenna-transmission line system in this paper. Taking the frequency band studied by IEEE and the frequency band over 1.7 MHz as object, we established three models of the RRI from transmission lines, namely the simplified line model, the tower line model considering cross arms and the line-surface mixed model. With the models, we calculated the scattering field of sampling points with equal intervals using method of moments, and then inferred expressions of Padé rational function. After calculating the zero-pole points of the Padé rational function, we eventually got the estimation of the RRI’s generalized resonant frequency. Our case studies indicate that the proposed estimation method is effective for predicting the generalized resonant frequency of RRI in medium frequency (MF, 0.3~3 MHz) band over 1.7 MHz, which expands the frequency band studied by IEEE.