• Journal of Nutrition and Health
• /
• 제6권4호
• /
• pp.23-36
• /
• 1973

This study was designed to compare the effect of dietary intakes on different quality protein & levels of caloric consumption supplemented by sugar at the level of 26% of total caloric intakes. 30 males and same number of females of Albino rats, aged 30-40 days were devided into following six groups, 5 rats each. ACO Group: Ad libitum, Casein, no sugar group ACS Group: Ad libitum, Casein, 26% sugar supplemented group RBO Group: 50% restriction,Bean, no sugar group RBS Group: 50% restriction, Bean, 26% sugar supplemented group RAO Group: 50% restriction, Anchovy, no sugar group RAS Group: 50% restriction, Anchovy, 26% sugar supplemented group The rats were kept in individual cage and given 6 different diet for 12 weeks. The result of this study were elucidated as follow. Body weight gained and organ weight showed no significant differences between sugar supplemented group and the others. It was noteworthy that the shrinkage of female sex organ supplemented by sugar in the diet showed lower degree than that of compared groups in this study. In other word, degree of shrinkage due to protein-caloric restriction was decreased by sugar supplementation. Nitrogen Metabolism and total nitrogen retention were not observed any significant differences between sugar supplemented group and the others. Dental caries showed higher incidence for sugar supplemented groups. Hematology and bone growth showed no differences in this study. The similar results on the metabolic effects concerned the above view Points were obtained in the different protein groups such as bean & anchovy as protein sources in the diet. Caloric restriction Produced a lower growth-rate, lower body weight and poorer long bone growth. But composition of bone ash, concentration of nitrogen, calcium and blood glucose, liver fats and liver water content maintenanced at the same levels of standard group.

• 한국의상디자인학회지
• /
• 제10권2호
• /
• pp.125-138
• /
• 2008

For physical and hand property evaluation of fabrics, the knitted fabrics from 11 types of machines knitting fancy yarns, boucle (M1), knot (M2), snarl (M3), and slub (M4), tamtam (M5), tubular (M6), fur 1 (M7), bead (M8), fur 2 (M9), fur 3 (M10), and ladder (M11) yarns, were prepared with 7-10 G plain stitch. Washing test and pilling test had also been carried out. For hand properties by objective sensibility evaluation, 17 items of sir mechanical properties using KES-FB (Kawabata Evaluation System) had been measured. Then hand values of knitted fabrics were calculated with a calculation formula, namely KN-402-KT. Finally the total hand values were obtained through KN-301-WINTER. As a result of physical properties and objective evaluation for machines knitting fancy fabrics, most of them shrank in the direction of wale and course after the washing test, in which their shrinkage rate had a maximum of 3.5%. Therefore, the washing test indicated that the shrinkage ratio of knitted fabrics had a minor change. The results of the pilling test are mostly 4-5th grade, and all of the machines knitting fancy fabrics showed good results in the pilling resistance. In hand properties and objective sensibility evaluation, twisted fancy yarns, such as boucle (M1), knot (M2), snarl (M3), and slub (M4), were superior to bonding rigidity (B) and shear rigidity (G). The surface property between course and wale differs in all samples and course direction is tougher than wale direction. FUKURAMI (fullness and softness) of all samples have high values, besides NUMERI (smoothness) of tamtam (M5) and boucle (M1), which were rather good. Most samples except fur 1 (M7) had low KOSHI (stiffness) value. The total hand value (THV) of twisted yarns was low. This study proves that manufacturers, who plan knitting yarn products and knit fashion, can apply these data to develop machines knitting yarns and knits that fit the consumers' demands.

• Journal of the Korean Wood Science and Technology
• /
• 제43권2호
• /
• pp.145-155
• /
• 2015

Fiber morphology and basic characteristics of Legi bamboos (Gigantochloa atter) growing on Yogyakarta were studied considering their age and height positions in the culms. Culms of 4, 16, and 40 months were harvested, and their total lengths were measured. The length, diameter, and wall thickness of each internode were measured. All the sample culms were divided into three different parts along the height, and their fiber dimension and physical properties were observed. The data obtained were analyzed by analysis of variance. The results showed that the culms had a diameter of 5.8 to 10.8 cm. The lowest internodes always showed the shortest length and the thickest wall. The culms had an average fiber length of 2.41 mm and Runkel ratio of 0.61. Fiber length was affected by the height, while fiber diameter, lumen diameter, and fiber wall thickness were affected significantly by the age of the culms. The culms had high green moisture content (GMC) of 157.89%, and basic density (BD) of $456.67kg.m^{-3}$, a total longitudinal shrinkage of 0.35%, and relatively low R/T shrinkage ratio. The interactions between age and height were affected GMC and BD.

• 한국의학물리학회지:의학물리
• /
• 제34권3호
• /
• pp.23-32
• /
• 2023

Purpose: In radiomics analysis, to evaluate features, and predict genetic characteristics and survival time, the pixel values of lesions depicted in computed tomography (CT) and magnetic resonance imaging (MRI) images are used. CT and MRI offer three-dimensional images, thus producing three-dimensional features (Features_3d) as output. However, in reports, the superiority between Features_3d and two-dimensional features (Features_2d) is distinct. In this study, we aimed to investigate whether a difference exists in the prediction accuracy of radiomics analysis of lung cancer using Features_2d and Features_3d. Methods: A total of 38 cases of large cell carcinoma (LCC) and 40 cases of squamous cell carcinoma (SCC) were selected for this study. Two- and three-dimensional lesion segmentations were performed. A total of 774 features were obtained. Using least absolute shrinkage and selection operator regression, seven Features_2d and six Features_3d were obtained. Results: Linear discriminant analysis revealed that the sensitivities of Features_2d and Features_3d to LCC were 86.8% and 89.5%, respectively. The coefficients of determination through multiple regression analysis and the areas under the receiver operating characteristic curve (AUC) were 0.68 and 0.70 and 0.93 and 0.94, respectively. The P-value of the estimated AUC was 0.87. Conclusions: No difference was found in the prediction accuracy for LCC and SCC between Features_2d and Features_3d.

• 대한소아치과학회지
• /
• 제30권1호
• /
• pp.102-109
• /
• 2003

본 연구는 중합수축을 줄이기 위해 개발된 2단계 광조사법을 사용하여 복합레진의 중합시 발생하는 수축양상을 스트레인 게이지법(strain gauge method)으로 측정해 보고, 중합도의 비교를 위해 미세경도를 측정해 본 다음 이 결과를 기존의 광조사법과 비교해 보고자 하는 것이었다. 내경 6mm, 높이 2mm의 아크릴 주형에 복합레진인 $Z100^{TM}$(3M, USA)을 충전하였고 Curing light 2500(3M, USA)과 Elipar Highlight(ESPE, Germany)의 광조사기를 사용하였다. I 군은 광도가 $450mW/cm^2$인 Curing light 2500으로 40초간 광조사하였고, II 군은 광도가 $650mW/cm^2$인 Elipar Highlight로 40초간 광조사하였으며, III 군은 Elipar Highlight의 2단계 중합 방법을 이용하여 초기 10초간은 $150mW/cm^2$로, 나머지 30초간은 $650mW/cm^2$의 광도로 조사하였다. 스트레인 게이지법을 이용하여 광조사 후 1초 간격으로 10분간 선중합 수축률(linear polymerization shrinkage)을 측정한 다음 그래프로 분석하였고, 중합 1분 후와 10분 후의 선수축률을 측정하여 통계분석하였으며 미세경도기를 사용하여 중합 24시간 후의 각 군의 미세경도를 측정하여 통계분석하였다. 중합수축 양상을 관찰해 본 결과 각 군에서 모두 중합 초기에 일시적인 재료의 팽창을 나타내었고, 그 후 약 1분간은 수축량이 급격히 증가하다가 증가의 폭이 점차 감소하는 양상을 보였다. 전반적으로 2단계 광조사법을 사용한 III 군에서 수축률이 낮게 나타났다. 중합 후 1분과 10분에서의 선수축률을 비교해 본 결과 통상적인 광조사법을 사용한 I 군과 II 군에 비해 2단계 광조사법을 사용한 III군에서 유의하게 낮은 수축률을 나타내었다(p<0.05). 미세경도 측정결과 상면과 하면에서 모두 각 군간에 유의한 차이를 발견할 수 없었다.

• 콘크리트학회논문집
• /
• 제18권1호
• /
• pp.109-116
• /
• 2006

크리프와 건조수축에 의한 비역학적 변형이 구조물의 내적 혹은 외적 경계조건에 의하여 억제됨으로써 발생하는 역학적 변형률은 내적 응력상태의 변화를 초래한다. 이러한 내적응력 상태의 변화는 크리프 변형의 초기조건을 변화시킴으로써 비역학적 변형에 영향을 미치게 되며 또 다시 내적응력 상태의 변화를 초래하는 순환루프를 형성하게 된다. 콘크리트의 재령종속적 재료특성을 고려한 장기거동해석에서 요구되는 구성관계는 이러한 응력상태의 지속적 변화로 초래되는 크리프 변형 미케니즘의 변화를 고려할 수 있어야한다. 비역학적 변형의 영향을 받는 합성형 거더의 거동 예측을 위하여 본 연구에서는 콘크리트의 재령종속적 특성을 고려한 총 응력-변형률 관계를 Taylor 급수확장을 이용하여 기준시간에 관해 선형으로 확장하는 과정을 통해 응력-변형률의 점증관계를 정의하는 증분유효접선계수를 재령종속적 관계로 유도하였다. 콘크리트의 건조 수축과 크리프 및 탄성계수발현으로 야기되는 합성형 거더의 재령종속적 거동을 분석하기 위해 제안된 증분유효접선계수에 근거하여 유한요소 정식화를 수행하였다. 개발된 해석 알고리즘을 이용하여 부모멘트 구간 하단부에 콘크리트를 타설한 이중합성 거더에 대하여 최근 수행된 재령종속적 거동 실험을 예측하였고, 두 결과를 비교하여 매우 근접한 예측 결과를 얻을 수 있었으며, 합성형 거더에서 발생하는 지점부 부반력을 비교과정을 통해 분석하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권6호
• /
• pp.19-26
• /
• 2021

교량 받침장치부는 상부구조의 수직하중을 지지하여 하부구조에 전달하고, 교량의 붕괴사고를 방지하는 역할을 한다. 하지만, 포항지진에 의하여 총 12개 도로교량의 받침장치 몰탈 파손, 받침장치 파손 및 쐐기 손상이 보고되었다. 본 연구에서는 지진시 교량 받침장치부의 구조 시스템 특성을 고려하여 교각의 코핑부와 무수축몰탈을 포함한 면진받침 장치 실험체의 전단 거동특성 및 손상모드를 평가하였다. 받침장치 쐐기에 대한 영향을 확인하기 위하여 쐐기 설치 유무를 변수로 설정하였으며, 압축-전단 실험을 실시하여 면진장치의 전단 거동특성과 손상모드를 확인하였다. 또한 유한요소해석을 통하여 받침장치의 거동특성 및 각 구성요소별 손상원인을 분석하였다. 실험결과, 쐐기의 충돌 및 손상 발생 이후 급격한 하중변화가 발생하였으며, 받침장치와 무수축몰탈 경계부를 따라 균열이 발생하였다. 쐐기 유무에 따른 쐐기, 앵커 소켓 및 무수축볼탈의 응력거동을 비교함으로써 지진시 교량받침장치부의 손상원인을 규명하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.303-308
• /
• 2002

A governing differential equation (GDE) of PSC flexural member with constant eccentricity considering the long-term losses including concrete creep, shrinkage, and PS steel relaxation is derived based on the two approaches. The first approach utilizes the force and moment equilibrium equations derived based on the geometry of strains of the uniform and curvature strains while the second one utilizes the principle of minimum total potential energy formulation. The identity of the two GDE's is verified by comparing the coefficients consisting of the GDE's. The boundary conditions resulting from the functional analysis of the variational calculus are investigated. Rayleigh-Ritz method provides a way to get the explicit form of the continuous deflection function in which the total potential energy is minimized with respect to the unknown coefficients consisting of the trial functions. As a closure, the analytically calculated results are compared with the experiments and show good agreements.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.463-468
• /
• 2003

A finite element formulation to predict the flexural behavior of composite girder is presented in which the early-age properties of concrete are specified including maturing of elastic modulus, creep and shrinkage. The time dependent constitutive relation accounting for the early-age concrete properties is derived in an incremental format by expanding the total form of stress-strain relation by the first order Taylor series with respect to the reference time. The total potential energy of the flexural composite member is minimized to derive the time dependent finite element equilibrium equation. Numerical applications are made for the 3-span double composite steel box girders which is a composite bridge girder filled with concrete at the bottom of the steel box in the negative moment region. The numerical analysis with considering the variation of concrete elastic modulus are performed to investigate the effect of it on the early-age behavior of composite structures. The one dimensional finite element analysis results are compared with the analytical method based on the sectional analysis. Close agreement is observed among the two methods.

• Communications for Statistical Applications and Methods
• /
• 제30권2호
• /
• pp.149-162
• /
• 2023

The ℓ₁-trend filtering method is one of the most widely used methods for extracting underlying trends from noisy observations. Contrary to the Hodrick-Prescott filtering, the ℓ₁-trend filtering gives piecewise linear trends. One of the advantages of the ℓ₁-trend filtering is that it can be used for identifying change points in piecewise linear trends. However, since the ℓ₁-trend filtering employs total variation as a penalty term, estimated piecewise linear trends tend to be biased. In this study, we demonstrate the biasedness of the ℓ₁-trend filtering in trend level estimation and propose a two-stage bias-reduction procedure. The newly suggested estimator is based on the estimated change points of the ℓ₁-trend filtering. Numerical examples illustrate that the proposed method yields less biased estimates for piecewise linear trends.