• Journal of Environmental Science International
• /
• v.33 no.1
• /
• pp.17-25
• /
• 2024

This study aimed to determine the most suitable coir substrate mixing ratio for optimizing the growth and yield of the "lpduelkkae 1" cultivar. We comprehensively analyzed the physicochemical properties, growth, and yields of four different substrate combinations: perlite (coir with mixing ratios of 70:30 (PC30), 50:50 (PC50), and 30:70 (PC70)) and 100% coir (C100). The results revealed substantial differences in substrate properties. C100 exhibited the highest total porosity and the lowest solid phase, indicating excellent air permeability. The pH levels and electrical conductivity (EC) values ranged from 5.4-6.8 and 1.2-3.1 dS·m^-1, respectively. Leaf growth parameters, including length, width, and dry weight, showed positive correlations with high coir ratios, except for PC30. PC70 and C100 outperformed other substrates in stem growth, exhibiting superior stem diameter and fresh and dry weights. The quantity of marketable leaves was the highest in the C100 substrate. Furthermore, C100 comprised integrated levels of essential nutrients, such as Ca and Mg, owing to its high coir content. In conclusion, a coir ratio of approximately 70% (v/v) should be maintained in the substrate for creating an optimal cultivation environment. Furthermore, the selection of humidity-resistant varieties as well as precise nutrient and moisture management for different seasons and growth stages are crucial for a successful perilla leaf hydroponic cultivation.

• Geomechanics and Engineering
• /
• v.36 no.5
• /
• pp.465-474
• /
• 2024

Uniaxial compressive strength (UCS) is a critical geomechanical parameter that plays a significant role in the evaluation of rocks. The practice of indirectly estimating said characteristics is widespread due to the challenges associated with obtaining high-quality core samples. The primary aim of this study is to investigate the feasibility of utilizing the gene expression programming (GEP) technique for the purpose of forecasting the UCS for various rock categories, including Schist, Granite, Claystone, Travertine, Sandstone, Slate, Limestone, Marl, and Dolomite, which were sourced from a wide range of quarry sites. The present study utilized a total of 170 datasets, comprising Schmidt hammer (SH), porosity (n), point load index (Is(50)), and P-wave velocity (Vp), as the effective parameters in the model to determine their impact on the UCS. The UCS parameter was computed through the utilization of the GEP model, resulting in the generation of an equation. Subsequently, the efficacy of the GEP model and the resultant equation were assessed using various statistical evaluation metrics to determine their predictive capabilities. The outcomes indicate the prospective capacity of the GEP model and the resultant equation in forecasting the unconfined compressive strength (UCS). The significance of this study lies in its ability to enable geotechnical engineers to make estimations of the UCS of rocks, without the requirement of conducting expensive and time-consuming experimental tests. In particular, a user-friendly program was developed based on the GEP model to enable rapid and very accurate calculation of rock's UCS, doing away with the necessity for costly and time-consuming laboratory experiments.

• Economic and Environmental Geology
• /
• v.53 no.1
• /
• pp.33-43
• /
• 2020

CO₂ geological storage is currently considered as the most stable and effective technology for greenhouse gas reduction. The saline formations for CO₂ geological storage are generally located at a depth of more than 800 m where CO₂ can be stored in a supercritical state, and an extensive impermeable cap rock that prevents CO₂ leakage to the surface should be distributed above the saline formations. Trough analysis of seismic and well data, we identified the basalt flow structure for potential CO₂ storage where saline formation is overlain by basalt cap rock around PZ-1 exploration well in the Southern Continental Shelf of Korea. To evaluate CO₂ storage capacity of the saline formation, total porosity and CO₂ density are calculated based on well logging data of PZ-1 well. We constructed a 3D geological grid model with a certain size in the x, y and z axis directions for volume estimates of the saline formation, and performed a property modeling to assign total porosity to the geological grid. The estimated average CO₂ geological storage capacity evaluated by the U.S. DOE method for the saline formation covered by the basalt cap rock is 84.17 Mt of CO₂(ranges from 42.07 to 143.79 Mt of CO₂).

• Current Research on Agriculture and Life Sciences
• /
• v.14
• /
• pp.49-60
• /
• 1996

In order to evaluate soil factors affecting the growth of Italian poplar, 23 areas planted with Italian poplar were surveyed. These 23 areas were classified into 3 categories, river-side, fallow-land and hill-side. The growth performance and soil factors for each area were investigated. The growth of Italian poplar at river-side was shown to be superior to that of fallow-land and fill-side. The rates of growth for fallow-land and hill-side are decreased by 8% and 21% compared to those of river-side, respectively. This suggests that plantation of Italian poplar at hill-side would not be profitable. Soil conditions of high productive area appeared liquid phase 20%, porosity 45%, water holding capacity 35 - 40%, soil hardness $1kg/cm^3$. pH 6 and rich in organic matter and total nitrogen. The results of factor analysis for soil factors affecting to Italian poplar growth that showed eigenvalue over 1 and communality value over 70% explained factor 1 : liquid phase, porosity and water holding capacity, factor 2 : pH and calcium, and factor 3 : soil hardness. This suggests that physical characteristics of soil is more important than chemical characteristics for Italian poplar growth. Multiregerssion analysis was conducted between diameter growth and soil hardness, liquid phase and calcium. The t-values for each independent variables showed significance at 1 - 10% level, but water holding capacity and pH are not significant. It is supposed that sites suitable to Italian poplar were alluvial plain of sandy loam or part of banking soil, well-ventilating soil, lower soil hardness, apposite soil moisture absorbing with about 100cm of ground water level, plentiful organic matters and total nitrogen and little acidity soil.

• Journal of Korean Society of Forest Science
• /
• v.110 no.2
• /
• pp.129-140
• /
• 2021

The study investigates the correlation between the seasonal changes in the absorption of fine dusts and the fine structure of surface on each type of street tree, such as Quercus myrsinifolia, Quercus glauca, Quercus salicina, Camellia japonica, and Prunus × yedoensis in the southernareas of Korea. The absorption ranges of fine dust were 31.51~110.44 ㎍/cm² in January, 23.20~79.30 ㎍/cm² in November, 22.68~76.90 ㎍/cm² in May, and 9.88~49.91 ㎍/cm² in August. The absorption value was about 54.4% higher in January than in May. With the grooves and hairs on the leaf surface and lots of wax, Q. salicina seems related to the high absorption rate of fine dust for each fine dust particle size. The one with gloss and smooth leaf surface has a low amount of wax. C. japonica Prunus × yedoensisshowed a low absorption rate of fine dust in each season. Whereas the increase in porosity density, length, and leaf area size can be related to the reduced PM and increasedabsorption rate, the leaf surface roughness, total wax amount, and porosity width can be related to the increase in the PM absorption rate. There was also a high correlation between the total wax amount and absorption rate of the leaf surface at the size of PM_0.2 than PM₁₀ and PM_2.5. These results imply that the quantitative and qualitative trais of leaf, such as wax amounts and leaf surface,can increase the absorption of fine dusts, and the small-sized particles seem to be highly adsorbed with the high wax amounts.

• Economic and Environmental Geology
• /
• v.54 no.4
• /
• pp.409-425
• /
• 2021

Carbon dioxide has been known to be a typical greenhouse gas causing global warming, and a number of efforts have been proposed to reduce its concentration in the atmosphere. Among them, carbon dioxide capture and storage (CCS) has been taken into great account to accomplish the target reduction of carbon dioxide. In order to commercialize the CCS, its safety should be secured. In particular, if the stored carbon dioxide is leaked in the arable land, serious problems could come up in terms of crop growth. This study was conducted to investigate the effect of carbon dioxide leaked from storage sites on soil fertility. The leakage of carbon dioxide was simulated using the facility of its artificial injection into soils in the laboratory. Several soil chemical properties, such as pH, cation exchange capacity, electrical conductivity, the concentrations of exchangeable cations, nitrogen (N) (total-N, nitrate-N, and ammonia-N), phosphorus (P) (total-P and available-P), sulfur (S) (total-S and available-S), available-boron (B), and the contents of soil organic matter, were monitored as indicators of soil fertility during the period of artificial injection of carbon dioxide. Two kinds of soils, such as non-cultivated and cultivated soils, were compared in the artificial injection tests, and the latter included maize- and soybean-cultivated soils. The non-cultivated soil (NCS) was sandy soil of 42.6% porosity, the maize-cultivated soil (MCS) and soybean-cultivated soil (SCS) were loamy sand having 46.8% and 48.0% of porosities, respectively. The artificial injection facility had six columns: one was for the control without carbon dioxide injection, and the other five columns were used for the injections tests. Total injection periods for NCS and MCS/SCS were 60 and 70 days, respectively, and artificial rainfall events were simulated using one pore volume after the 12-day injection for the NCS and the 14-day injection for the MCS/SCS. After each rainfall event, the soil fertility indicators were measured for soil and leachate solution, and they were compared before and after the injection of carbon dioxide. The results indicate that the residual concentrations of exchangeable cations, total-N, total-P, the content of soil organic matter, and electrical conductivity were not likely to be affected by the injection of carbon dioxide. However, the residual concentrations of nitrate-N, ammonia-N, available-P, available-S, and available-B tended to decrease after the carbon dioxide injection, indicating that soil fertility might be reduced. Meanwhile, soil pH did not seem to be influenced due to the buffering capacity of soils, but it is speculated that a long-term leakage of carbon dioxide might bring about soil acidification.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.191-195
• /
• 2003

This study was conducted in 2001 to develop a technique for mass production of superior seed tuber by using a wick culture system as an alternative plan to solve problems in hydroponic culture of potato. Potato (Solanum tuberosum L. cv. Dejima) plug seedings were planted on a styrofoam bed (volume $0.032\textrm{m}^3$) containing two different media (Jeju scoria + peatmoss and perlite + peatmoss, (1:2, v/v) mixture, respectively). Each bed was equipped with various number of wicks (2, 4, 6, 8 and 10 ea/bed). After harvest, the total porosity of both media was 83-85%. Bulk density of Jeju scoria + peatmoss was higher compared to that of perlit + peatmoss. However, the number of wicks did not influence to the bulk density. Conversely, moisture capacity of Jeju scoria + peatmoss was remarkably greater than that of perlite + peatmoss and was increased from 55 to 70% as elevating number of wicks. Although the number of wicks resulted in the areal growth of plants, the total yield and the weight of tuber were highest at the bed equipped with six wicks in both media.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.3
• /
• pp.342-347
• /
• 2007

Physicochemical properties of onion powder as influenced by drying methods were investigated. Moisture contents of onion powder were 13.29%, 12.99%, and 10.78% for samples dried using hot-air dryer, freeze dryer, and vacuum dryer, respectively. There were no significant differences in crude fat, crude protein, and crude ash content (p>0.05) depending on the drying methods. Samples prepared by freeze drying showed a significantly higher L-value as compared with those prepared by hot-air and vacuum drying (p<0.05). Scanning electron micrographs showed that freeze drying produced smaller particle-sized sample which in turn resulted in the higher porosity of the sample. Freeze dried samples revealed significantly lower degree of rehydration than other samples (p<0.05) probably due to small particle size of the sample. Water solubility of freeze dried sample appeared to be higher than that of other drying methods while the swelling ratio of the same sample appeared to be lower than that of the others. Browning index was significantly lower in samples prepared by freeze drying (p<0.05) but not significantly different between samples dried by hot-air and vacuum drying. Vitamin C content was higher in freeze dried onion powder due to the lower temperature applied to the sample. Freeze dried onion powder contained significantly lower amount of total polyphenol and higher amount of total sugar as compared to other samples (p<0.05).

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.2
• /
• pp.84-95
• /
• 2014

Recently, as a variety of techniques of CMF (Compressed media filter) that has advantages of high porosity and compressibility have been developed in the U.S. and Japan. Therefore, the interest of intensive wastewater treatment using CMF has grown. This study examined the feasibility of CMF with varying sewage water quality to determine the optimum operating conditions. A preliminary tracer test that investigated the filtering process under various compression and flow rate conditions was performed. In a high compression condition, different porosities were applied to each depth of the column. Therefore, a distinct difference between a theoretical value and results of tracer test was observed. For the TSS (Total suspended solid) removal and particle size distribution of CMF for pre-treatment water under the various compression conditions, the compression ratio of 30 percent as the optimal condition showed greater than 70% removal efficiency. In addition, the compression ratio of >15% was required to remove small-sized particles. Also, an additional process such as coagulation is necessary to increase the removal efficiency for < $10{\mu}m$ particles, since these small particles significantly influence the effluent concentration. Modeling results showed that as the compression rate was increased, TSS removal efficiency in accordance with each particle size in the initial filtration was noticeably observed. The modeling results according to the depth of column targeting $10{\mu}m$ particles having the largest percentage in particle size distribution showed that 150-300 mm in filter media layer was the most active with respect to the filtering.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.2
• /
• pp.261-269
• /
• 2015

In this study, we applied a membrane distillation process to investigate a feasibility of treating a wastewater with high concentration of organic matters including nitrogen and phosphorus. The laboratory scale experiment was performed by using a hydrophobic PVDF membrane with the pore size of $0.22{\mu}m$ and porosity of 75%. The installation was direct contact type where the temperature difference between a feed and permeate side was controlled to have a range from 20 to $60^{\circ}C$. We observed a flux variation and a concentration changes of COD, $PO{_4}^{3-}$-P, $NH_4{^+}$-N and conductivity of feed side as well as permeate side with various temperature differences (20 to $60^{\circ}C$), cross flow velocities (0.09 to 0.27 m/s) through the module, and pH (6.6 to 12.0) of the feed that has the initial concentration of COD about 1,000 mg/L, total nitrogen 390 mg/L, total phosphorus 10 mg/L, conductivity of $7,000{\mu}s/cm$. The results showed that the average flux was ranged from 4 to $40L/m^2/hr$ which was almost similar with the flux of NaCl and deionized water used as a feed solution. The lowest flux was obtained at the operating condition with the temperature difference of $20^{\circ}C$ and cross flow velocity of 0.09 m/s while the highest one was measured with $60^{\circ}C$ and 0.27 m/s. Above 99% of COD and $PO{_4}^{3-}$-P in the feed could be rejected regardless of an operating condition. However, the removal rate of ammonium nitrogen was varied from 64 to 99% depending on the pH of feed solution.