• 대한환경공학회지
• /
• 제30권9호
• /
• pp.900-906
• /
• 2008

활성탄을 제조하기 위하여 원료물질로서 음식물쓰레기를 이용하였다. 음식물쓰레기를 염화아연으로 약품활성화 하였다. 실험은 서로 다른 약품첨가비율(활성화제/음식물쓰레기), 활성화 온도, 그리고 활성화시간을 변수로 하여 수행하였다. 활성화물의 특성을 나타내기 위하여 요오드가와 메틸렌블루 가, BET 표면적, 세공 용적, 미세공 비율, 세공 직경, 수율 그리고 주사전자현미경 관찰을 수행하였다. 로터리 킬른 반응로를 이용하여 염화아연 함침비 1.0배인 시료를 500$^{\circ}C$에서 60분 동안 활성화하여 제조한 활성화물의 요오드가는 480 mg/g, 메틸렌블루 가는 95 mL/g, BET 표면적은 410 m$^2$/g, 세공 용적은 0.248 cm$^3$/g, 그리고 평균세공직경은 2.43 nm로 나타났다. 제조한 활성탄의 총 표면적중 미세공 면적 비율은 70.7%, 총 세공 용적 중 미세공 용적 비율은 53.2%를 나타냈다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.33-34
• /
• 2003

Lyocell yarns were treated with NaOH, liquid ammonia, high pressure steam and polycarboxylic acids, and dyed with five reactive dyes. The water content of the samples was also measured by the centrifugal and chromatographic techniques. The total pore volume w as substantially increased by NaOH treatment, while decreased by high pressure steaming. The pore size distributions for the dyed samples were affected by the dyes used.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.427-434
• /
• 2000

Hydraulic conductivity of soil-cement was measured as a function of some selected construction variables that are often encountered in practice. They are initial (or compaction) water content, delayed compaction after mixing, and repeated freezing and thawing. Sandy and clayey soils were used. The hardening agent used was a cement based soil stabilizer consisting of 80% of ordinary Portland cement and 20% of a combination of supplementary materials. Hydraulic conductivity of soil-cement with varying initial water content was, in trend, similar to that of compacted clay. Hydraulic conductivity of soil-cement decreased with increasing initial water content and reached its minimum when compacted wet of optimum water content. Pore size distributions of soil cement at different initial water contents were analyzed using mercury intrusion porosimetry. The analysis showed that dryer condition led to the formation of larger pores with lesser total pore volume; smaller pores with larger total pore volume at wetter condition. Hydraulic conductivity of soil-cement increased by orders in magnitude when specimen underwent delayed compaction of longer than 4 hours after mixing and repeated freezing and thawing.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.569-573
• /
• 2013

In this study, activated carbon fabric was prepared from a cellulose-based polymer (viscose rayon) via a combination of physical and chemical activation (mixed activation) processes by means of $CO_2$ as a gasifying agent and surface and adsorption properties were evaluated. Experiments were performed to investigate the consequence of activation temperature (750, 800, 850 and $925^{\circ}C$), activation time (15, 30, 45 and 60 minutes) and $CO_2$ flow rate (100, 200, 300 and 400 mL/min) on the surface and adsorption properties of ACF. The nitrogen adsorption isotherm at 77 K was measured and used for the determination of surface area, total pore volume, micropore volume, mesopore volume and pore size distribution using BET, t-plot, DR, BJH and DFT methods, respectively. It was observed that BET surface area and TPV increase with rising activation temperature and time due to the formation of new pores and the alteration of micropores into mesopores. It was also found that activation temperature dominantly affects the surface properties of ACF. The adsorption of iodine and $CCl_4$ onto ACF was investigated and both were found to correlate with surface area.

• 약학회지
• /
• 제29권4호
• /
• pp.176-182
• /
• 1985

As a part of the studies on adsorptive properties of Korean halloysite clays, Hadong white clays of premium grade were examined for geometric pore structured by mercury porosimetry and for specific surface areas by nitrogen adsorption according to the BET procedure. Three size fractions of the native clay sample were derived from passage BS #100, #200 and #325 meshes, respectively. Several parameters lhus observed in relation to the pore structures are shown below: 1. The size fraction of BS #100, #200 and #325 show internal pore volumes of 25.3, 30.2 and $35.0m^2g^{-1}$, respectively. 2. In the distribution curves of the cumulative pore volume against pore diameter, it has been shown that the larticle sizes, the steeper the distribution over the larger ranges of pore diameters. The converse is true the smaller particles. 3. Internal pore areas increase with decrease in pore sizes. It follows that the pores having diameters of $\leq$0.1$\mu\textrm{m}$ are responsible for more than 90% of the total pore area. 4. The behaviour of nitrogen adsorption can be best described by BET type IV isotherm. Further, the hysteresis loops of the adsorptiondesorption curves become narrower with decresing particle sizes. 5. The specific surface areas observed for the fractions of BS #100, BS #200 and BS #325 are 34.6, 35.4 and 43.2m $^2g^{-1}$, respectively. and the calcined clay of BS #325 has a specific surface area near $30.4m^2g^{-1}$.

• 한국세라믹학회지
• /
• 제33권12호
• /
• pp.1394-1402
• /
• 1996

The Silica gel with the density of 0.2g/cm3 and porosity of 90% was synthesized. The silica wet gel was dried and heat-treated under the ambient pressure after modification of the wet gel surface by TMCS. Specific surface area total pore volume and mean pore radius of dried gel were all increased with increasing heat treatment temperature and confirmed about 1400m2/g, 4.5cc/g and 8 nm respectively after heat treatment above 25$0^{\circ}C$. But the pore size distribution of dried gel was in the range of 1-100nm and was almost indepen-dent of temperature. As the result of external shape pore characteristics and microstructure of gel using SEM similar properties were observed between the silica gel synthesized in this study and the silica aerogel through the super critical drying.

• 한국재료학회지
• /
• 제27권4호
• /
• pp.192-198
• /
• 2017

Carbon nanofiber (CNF) is used as an electrode material for electrical double layer capacitors (EDLCs), and is being consistently researched to improve its electrochemical performance. However, CNF still faces important challenges due to the low mesopore volume, leading to a poor high-rate performance. In the present study, we prepared the unique architecture of the activated mesoporous CNF with a high specific surface area and high mesopore volume, which were successfully synthesized using PMMA as a pore-forming agent and the KOH activation. The activated mesoporous CNF was found to exhibit the high specific surface area of $703m^2g^{-1}$, total pore volume of $0.51cm^3g^{-1}$, average pore diameter of 2.9 nm, and high mesopore volume of 35.2 %. The activated mesoporous CNF also indicated the high specific capacitance of $143F\;g^{-1}$, high-rate performance, high energy density of $17.9-13.0W\;h\;kg^{-1}$, and excellent cycling stability. Therefore, this unique architecture with a high specific surface area and high mesopore volume provides profitable synergistic effects in terms of the increased electrical double-layer area and favorable ion diffusion at a high current density. Consequently, the activated mesoporous CNF is a promising candidate as an electrode material for high-performance EDLCs.

• 한국재료학회지
• /
• 제11권11호
• /
• pp.978-985
• /
• 2001

The amorphous alumina was obtained by flash calcination of Bayer gibbsite[$Al(OH)_3$aluminum trihydroxide]. Rehydration and pore characteristics of $r-A1_2O_3$ prepared from rehydrated amorphous alumina were investigated. Crystal phases of pseudo-boehmite and bayerite were changed when amorphous alumina was hydrated at various conditions such as time, the ratio of water/alumina and pH. Specific surface areas and pore volumes of $r- A1_{2O}_3$ were influenced by the reaction time, water/alumina and PH of rehydration. The total pore volume of $r-A1_{2O}_3$increases with increasing the reaction time and ratio of water/alumina. Especially, the pure pseudo-boehmite of single phase could be prepared, when amorphous alumina was hydrated in the range of pH 6.5-8.0 in water/alumina= 10 at $90^{\circ}C$ for 7hr. The $r-Al_{2O}_3$, obtained by calcination of the prepared pseudo-boehmite at $500^{\circ}C$ for 2hrs, is characterized by the specific surface area of $265m^2$/g, total pore volume of $0.75cm^3$/g.

• 대한환경공학회지
• /
• 제22권12호
• /
• pp.2141-2148
• /
• 2000

본 연구는 무연탄올 원료로 제조한 활성탄의 활성화 시간과 burn-off에 따른 세공구조의 변화를 고찰한 것으로 77K에서 질소 흡착실험에 의해 특성을 분석했다. 활성화 시간의 증가에 따라 burn-off는 거의 선형적으로 증가하며, burn-off를 증가시킴에 따라 제조된 활성탄의 총세공부피와 BET 비표면적은 증가했다. $800^{\circ}C$의 활성화는 $950^{\circ}C$의 활성화에 비해 미세세공(micropore)을 많이 생성시켰고, 동일한 burn-off에서는 저온에서 활성화시킨 활성탄에 미세세공이 발달하고 고온에서 활성화시킨 활성탄에 중간이상의 세공이 더 발달해 있었다. 수증기 활성화에 의해서는 직경 $100{\AA}$ 이하의 세공이 주로 발달되었으며 특히 $6{\sim}40{\AA}$ 범위의 세공은 burn-off의 정도에 따라 상당히 발달됨을 알 수 있었다.

• 원예과학기술지
• /
• 제19권2호
• /
• pp.179-185
• /
• 2001

원예용 배지의 물리화학적 특성을 파악하기 위해 전세계적으로 다양한 분석 방법이 사용되고 있다. 유럽은 배지 분석방법의 표준화 연구를 지속적으로 수행해왔다. 유럽표준화 위원회에서는 유럽표준방법으로 CEN methods를 최종안까지 제출하였으며 사실상 유럽표준 배지분석방법의 제정을 확립하는 단계에 있다. 물리적 특성 중 건물함량과 수분함량은 건조 후 분석하였고, 실험 가밀도는 일정한 부피에 채워진 시료의 무게로 측정하였다. 가밀도, 진밀도, 공극률, 액상, 기상, 부피 감소율은 double ring과 sand suction table이라는 장치를 사용하여 배지를 포화, 배수시킨 후 건조시켜 분석하였다. 화학적 특성 중 pH와 EC는 부피 기준 1:5로 침출하여 분석하였다. 유기물과 회분함량은 건조와 연소 과정을 통해 분석하였다. CEN methods는 유럽표준방법으로 확립을 앞두고 있으나 더 지속적인 연구가 필요할 것이다.