• 한국관개배수논문집
• /
• 제18권1호
• /
• pp.94-102
• /
• 2011

The aim of this study was to evaluate the load of non-point sources pollutant at a paddy plot located at the valley watershed during irrigation period. Irrigation, runoff and water quality data in the paddy plot were analyzed periodically from June 1 to October 31 in 2005. The observed amount of precipitation, irrigation, runoff for the experimental paddy plot during the irrigation period was 1,297.8, 223.2, and 825.4mm, respectively. Total-N concentrations ranged from 3.73 to 18.10mg/L, which was generally higher than the quality standard of agricultural water (1.0mg/L). Total-P concentrations ranged from 0.111 to 0.243mg/L and the average was 0.139mg/L. The observed runoff pollutants loadings from the paddy plot were measured as 34.4 kg/ha for T-N, 1.0 kg/ha for T-P and 213.8 kg/ha for SS. The non-point sources pollutant load in drainage water depends on rainfall and surface drainage water amount from the paddy plot. We are considering that these results were affected by rainfall as well as hydrological condition, soil management, whether or not fertilizer application, cropping, rice straw and plowing.

• Ocean Systems Engineering
• /
• 제8권4호
• /
• pp.409-426
• /
• 2018

This paper presents the strengthening of tubular joint by wrapping Carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP). In this study, total number of layers, stacking sequence and length of wrapping are the different parameters involved when fiber reinforced polymers (FRP) composites are used for strengthening. For this, parameters where varied and results were compared with the reference joint. The best stacking sequence was identified which has the highest value in ultimate load with lesser deflections. For determining the best stacking sequence, numerical investigation was performed on CFRP composites; length of wrapping and number of layers were fixed. Later, the studies were focused on CFRP and GFRP strengthened joint by varying the total number of layers and length of wrapping. An attempt was done to propose a parametric equation from multiple regression analysis, which can be used for CFRP strengthened joints. Hashin failure criteria was used to check the failure of composites. Results revealed that FRP was having a greater influence in the load bearing capacity of joints, and in reducing the deflections and stresses of joint under axial compressive loads. It was also seen that, CFRP was far better than GFRP in reducing the stresses and deflection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.224-226
• /
• 2005

Grid computing enables the fundamental computing shift from a localized resource computing model to a fully-distributed virtual organization with shared resources. In the grid computing environment, grid users usually get access rights by mapping their credential to local account. The mapped total account is temporally belongs to grid user. So, data on the secondary storage, which is produced by grid operation, can increase the load of system administration or can issue grid user's privacy. In this paper, we design a data management system for grid user to cover these problems. This system implements template account mechanism and manages local grid data.

• 한국해양환경ㆍ에너지학회지
• /
• 제4권3호
• /
• pp.28-39
• /
• 2001

광양만의 수질현황을 파악하고 환경변동에 따른 수질을 예측해서 부영양화를 억제하고 수질 환경회복을 위한 적절한 수질관리대책을 제시하기 위해서 생태ㆍ유체역학 수치모델을 이용하였다 광양만에 대한 점원 오염부하량의 약 90%가 폐수배출부하량이 차지하는 것으로 나타났으며, 부영양화 기준인 Chl. α 10㎍/L이하와 해역수질환경기준 II등급인 COD 2㎎/L이하를 지속적으로 유지하기 위해서는 현재의 점원 오염부하량의 약 35%이상 저감하는 대책이 요구되는 것으로 예측되었다.

• 대한안전경영과학회지
• /
• 제21권4호
• /
• pp.81-89
• /
• 2019

Need to make efforts to reduce greenhouse gas emissions in order to slow global warming is globally recognized and also appealing to the United Nations. The main cause of greenhouse gases is carbon dioxide, and the nation has 23.9 percent of its total emissions in the transportation sector. It was also reported that 61.56 percent of living waste is being recycled, suggesting that environmentally friendly logistics activities should proceed with efforts on goods and services at each stage of distribution. In this study, we conducted a survey of green logistics activities that were environmentally friendly by businesses, divided into management, water/delivery and packaging waste, and identified the status and level of each business sector. As a result, data was collected from 36 manufacturing companies, 28 distribution businesses, and 40 logistics businesses, all of which were 104 companies, and based on the analysis results, a measure for environmentally friendly logistics activities was proposed.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.1993-1999
• /
• 2011

Today, the power utilities is setting on the slow load growth and the aging of power equipment, and then could spend the efforts on the stability of system performance. Asset management may be defined as the process of maximizing corporate profit by maximizing performance and minimizing cost over the entire life cycle of power equipment. Therefore, asset management is great way to fulfill the economic investment and the stability of system performance. This paper presents the application of effective asset managem ent from an economic perspective. A proposed method is considering the life cycle analysis using life cycle cost methodology for hydro-generator during the total life cycle. The life cycle cost methodology include a way to calculating maintenance and operating costs. The proposed method will be expected to play an important role in investment decision making considering economic evaluation.

• 상하수도학회지
• /
• 제18권4호
• /
• pp.453-460
• /
• 2004

The objective of this research is to develop the water quality management model to achieve the water quality goal and the minimization of the waste load abatement cost. Most of existing water quality management model can calculate BOD and DO. In addition to those variables, N and P are included in the management model of this study. With a genetic algorithm, calculation results from the mathematical water quality model can be used directly in this management model. Developed management model using genetic algorithm was applicated for the Youngsan River basin. To verify the management model, water quality and pollution source of the Youngsan River had been investigated. Treatment types and optimum treatment costs of the existing and planned WWTPs in the baisn were calculated from the model. The results of genetic algorithm indicate that Kwangju and Naju WWTP have to do the advanced treatment to achieve the water quality goal about BOD, DO and TP. Total annual treatment cost including the upgrade cost of existing WWTPs in the Youngsan River basin was about 50.3 billion Won.

• 조명전기설비학회논문지
• /
• 제27권2호
• /
• pp.7-13
• /
• 2013

The portion of lighting power consumption for our country is up to 20~30% of the total amount. Currently, most of the DSM(Demand side management) of lighting power is delivered in supply of high efficient lighting to customers. On the contrary, applications of lighting power to power load leveling are still rare. In this paper, the simulations for various control types of lighting power for load leveling are tried, and we obtained the cost effective and optimal control method through that. This simulation was executed in test office with fluorescent light by us based on applying 8 control types(on, off & dimming), considering customers' satisfaction, for instance, minimum intensity of illumination allowed. According to the result of this test, we found that mixed type(chessboard(on-off) plus dimming control(10%)) is most effective.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.296-298
• /
• 2003

At the water supply field, high voltage induction motor is main facility of a load equipment. The motor is often out of order and its noise, generated heat, loss etc occured occasionally. especially, transmission motor for flux control generates an amount of the harmonics then have a bad influence upon the electric power system. In this study, to analyze the total harmonics distortion of the water supply field receiving high voltage, the harmonics measured and analyzed using the PQA(Power Quality Analyzer) according to the electric power system and electrical load and the reduction method presented.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.345-347
• /
• 2005

The electric demands increase, financial need for new power plant constructions and environmental problem have led to search for more efficient energy production and load management. To minimize the construction of power plants and reduce total power consumption include installation of demand controller to industrial applications. Accordingly to maximize the load control by the diffusion of demand controller, govermental economic supports as well as the analysis of energy saving effects. This paper presents the cost-effectiveness analysis for DSM program evaluation and case study to analyze demand controller DSM program.