• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.7
• /
• pp.1000-1006
• /
• 2015

The adolescent period, during which physical, spiritual, and physiological growth and development occurs, is important for the development of healthy dietary habits. Particularly, eating a regular breakfast improves eating habits and school life in adolescents but few studies have investigated the effects of eating breakfast on these outcomes. Therefore, this research was performed to investigate the effects of eating a regular breakfast provided by the 'Breakfast Club Program' on eating behaviors and school life. A total of 315 high school students were recruited for the program from 10 high schools in nine districts among 25 districts in Seoul during August to December of 2013. The average age was $17.8{\pm}0.8$ years and 38.1% of students were females. Based on 315 subjects, 38.3%, 35.7%, and 17.1% increased their intakes of breakfast (P=0.001), fruit (P=0.033), and milk (P<0.001) up to 5~7 times per week, respectively. The intake frequency of fruit (P<0.001) and eating breakfast (P<0.001) increased noticeably after program participation. Based on 64 students performing dietary record, intakes of cereals (P<0.001), mushrooms (P=0.027), and fruits (P=0.002) increased while intakes of eggs (P=0.001) and fat and oils (P=0.019) decreased after the program. Consumption of energy (P=0.004), plant protein (P=0.012), carbohydrates (P<0.001), dietary fiber (P=0.026), iron from plant sources (P=0.009), potassium (P=0.043), zinc (P=0.013), vitamin $B_1$ (P=0.043), and vitamin C (P<0.001) increased whereas intake of cholesterol (P=0.002) decreased. Regarding school life, the score for 'comfortable and cheerful starting of a day' (P=0.001) and 'healthy starting of a day' (P<0.001) increased significantly. This study indicates that a regular 'Breakfast Club Program' may establish healthy eating habits and school life in teenagers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1208-1214
• /
• 2011

Caffeine, a psychoactive stimulant, has been implicated in the modulation of learning and memory functions due to its action as a non-selective adenosine receptors antagonist. On the contrary, some side effects of caffeine have been reported, such as an increased energy loss and metabolic rate, decrease DNA synthesis in the spleen, and increased oxidative damage to exerted on LDL particles. Therefore, the aim of this study was to develop a safe stimulant from natural plants mixture (Aralia elata, Acori graminei Rhizoma, Chrysanthemum, Dandleion, Guarana, Shepherd's purse) that can be used as a substitute for caffeine. Thirty SD rats were divided into three groups; control group, caffeine group (15.0 mg/kg, i.p.), and natural plants mixture group (NP, 1 mL/kg, p.o.). The effect of NP extract on stimulant activity was evaluated with open-field test (OFT) and plus maze test for measurement of behavioral profiles. Plasma lipid profiles, lipid peroxidation in LDL (conjugated dienes), total antioxidant capacity (TRAP) and DNA damage in white blood, liver, and brain cells were measured. In the OFT, immobility time was increased significantly by acute (once) and chronic (3 weeks) supplementation of NP and showed a similar effect to caffeine treatment. Three weeks of caffeine treatment caused plasma lipid peroxidation and DNA damage in liver cells, whereas there were no changes in the NP group. NP group showed a higher plasma HDL cholesterol concentration compared to the caffeine group. The results indicate that the natural plants mixture had a stimulant effect without inducing oxidative stress.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.91-93
• /
• 2003

A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.416-423
• /
• 2009

Statement of problem: The degree of light attenuation at the time of cementation of the PLV restoration depends on characteristics such as thickness, opacity and shade of the restorations, which interfere with light transmittance and, as a result, may decrease the total energy reaching the luting cement. Purpose: The purpose of this study was to compare the degree of conversion of light-cured resin cements measuring by FT-IR in regard to different thickness, light devices and curing time. Material and methods: In the control group, a clear slide glass (1.0 mm) was positioned between the light cured resin cement and light source. The specimens of ceramics were made with IPS Empress Esthetic. The ceramics were fabricated with varying thicknesses-0.5, 1.0, 1.5 mm with shade ETC1. Rely $X^{TM}$ Veneer with shade A3, light-cured resin cement, was used. Light-activation was conducted through the ceramic using a quartz tungsten halogen curing unit, a light emitting diode curing unit and a plasma arc curing unit. The degree of conversion of the light-cured resin cement was evaluated using FT-IR and OMNIC. One-way ANOVA and Tukey HSD test were used for statistical analysis ($\alpha$< .05). Results: The degree of conversion (DC) of photopolymerization using QTH and LED was higher than results of using PAC in the control group. After polymerization using QTH and LED, the DC results from the different ceramic thickness- 0.5 mm, 1.0 mm, 1.5 mm- did not show a significant difference when compared with those of control group. However, the DC for polymerization using PAC in the 1.5mm ceramic group showed significantly lower DC than those of the control group and 0.5 mm ceramic group (P<.05). At 80s and 160s, the DC of light-cured resin cement beneath 1.0 mm ceramic using LED was significantly higher than at 20s (P<.05). Conclusion: Within the limitation of this study, when adhering PLV to porcelain with a thickness between 0.5-1.5 mm, the use of PAC curing units were not considered however, light cured resin cements were effective when cured for over 40 seconds with QTH or LED curing units. Also, when curing the light cured resin cements with LED, the degree of polymerization was not proportional with the curing time. Curing exceeding a certain curing time, did not significantly affect the degree of polymerization.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.7
• /
• pp.37-47
• /
• 2017

In this study, a series of full-scale field tests on prebored and precast steel pipe piles and the corresponding numerical analysis have been conducted in order to study the characteristics of pile load-settlement relations and shear stress transfer at the pile-soil interface. Dynamic pile load tests (EOID and restrike) have been performed on the piles and the estimated design pile loads from EOID and restrike tests were analysed. Class-A type numerical analyses conducted prior to the pile loading tests were 56~105%, 65~121% and 38~142% respectively of those obtained from static load tests. In addition, design loads estimated from the restrike tests indicate increases of 12~60% compared to those estimated in the EOID tests. The EOID tests show large end bearing capacity while the restrike tests demonstrate increased skin friction. When impact energy is insufficient during the restrike tests, the end bearing capacity may be underestimated. It has been found that total pile capacity would be reasonably estimated if skin friction from the restrike tests and end bearing capacity from the EOID are combined. The load-settlement relation measured from the static pile load tests and estimated from the numerical modelling is in general agreement until yielding occurs, after which results from the numerical analyses substantially deviated away from those obtained from the static load tests. The measured pile behaviour from the static load tests shows somewhat similar behaviour of perfectly-elastic plastic materials after yielding with a small increase in the pile load, while the numerical analyses demonstrates a gradual increase in the pile load associated with strain hardening approaching ultimate pile load. It has been discussed that the load-settlement relation mainly depends upon the stiffness of the ground, whilst the shear transfer mechanism depends on shear strength parameters.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.3
• /
• pp.325-332
• /
• 2008

The human population is mainly exposed to dioxins through the diet. The purpose of this study was to estimate the daily dietary intake of PCDDs and PCDFs in Korean adults residing in different regions. Subjects were recruited and divided into three groups according to the districts where they lived: rural (n=213), coastal (n=193), and urban district (n=187). Subjects were interviewed using a general questionnaire and 24-hour recall for dietary intake. The daily intake of dioxins was estimated through the use of the database of dioxins contents in 35 Korean foods. The average age of the subjects were 61.5 years for coastal district, 57.6 years for rural district, and 49.4 years for urban district. Daily energy intake was 1707.7 kcal for rural district, 1596.5 kcal for urban district, and 1493.8 kcal for coastal district. There was no significant difference in total food intake by regions. The intakes from fishes of coastal district, those from cereals, vegetables, meats, and seasonings of rural district, and those from sugars, pulses, eggs, seaweeds, milks, oils of urban area were higher than those of the other two districts. The daily dioxins intake of coastal district (0.70 pgTEQ/kg/day) was significantly higher than those of rural district (0.32 pgTEQ/kg/day) and urban district (0.46 pgTEQ/kg/day). The dioxins intake from cereals, pulses, vegetables, fishes of coastal district and those from eggs and milks of urban area were the highest among the districts. The daily dioxins intake was positively correlated with the intakes of meats, eggs, fishes, oils, and seasonings. Therefore, it could be concluded that the daily dioxins intake of coastal district is higher than that in other districts and the fish is one of the main sources in dioxin intakes. However, daily dioxins intakes of the three regions were below the level of tolerable daily intake (TDI).

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.5
• /
• pp.732-738
• /
• 2008

This study was carried out to examine information regarding nutritional intake according to intake of health improving agents. For this study, 593 adults were interviewed face-to-face. The average ages of the participants were 58.8 years old in males and 56.1 years old in females. The percentage of individuals taking agents was significantly higher (p<0.05) among the females (22.1%) than the males (14.1%). Men showed a preference for taking animal protein bases restorative food and health supplements, while women preferred health supplements and nutritional supplements as improving agents. However, there were no significant differences between the two groups. The total daily food intake was also not significantly different according to intake of improving agents in the male and female groups. The male subjects who took improving agents showed significantly lower intake of potato and starches, pulses, fungi and mushrooms, seaweeds, oils and fat, as well as seasoning than those of non-users. Female subjects who took these agents also had a significantly lower intake of pulses, nuts and seeds than nonusers. No difference in the daily energy intake was reported in male and female groups whether the individuals were taking improving agents in male and female groups or not. However, in male subjects who took improving agents, there was a significantly lower intake of protein, dietary fiber, carotene, vitamin $B_1$, folate, vitamin C, vitamin E, plant calcium, potassium and plant iron than the male non-users. This study suggests that practical education be emphasized for proper nutrition intake thorough nutritional management according to improving agents.

• Journal of the Korean Magnetics Society
• /
• v.27 no.2
• /
• pp.41-48
• /
• 2017

Recent study shows that ordered alloy of $L1_2$ $XPt_3$ (M = V, Cr, Mn, Co, and Fe) exhibits various magnetic phases such as ferromagnetic-to-antiferromagnetic transition at the $MnPt_3$ surface. Moreover, it has been argued that $CrPt_3$, in particular, possess large magnetocrystalline anisotropy and Kerr rotation with possible violation of Hund's rule. As such, we extend our work to thickness dependence of the magnetic structure of $CrPt_3$ thin film using density functional theory. Magnetic ground state of the bulk $CrPt_3$ turns out to be ferromagnetic (FM), where other magnetic phases such as A-type (A-AF), C-type (C-AF), and G-type antiferromagnetic (G-AF) state have higher total energies than FM by 0.517, 0.591, and 0.183 eV, respectively, and magnetic moments of Cr in bulk are respectively 2.807 (FM), 2.805 (A-AF), 2.794 (C-AF) and $2.869_{{\mu}_B}$ (G-AF). We extend our study to $CrPt_3$(001) thin films with CrPt-and Pt-termination. The thickness and surface-termination dependences of magnetism are investigated for 3-9 monolayers (ML), where different magnetic phases from bulk emerge: C-AF for CrPt-terminated 3 ML and G-AF for Pt-terminated 5 ML have energy difference relative to FM by 8 and 54 meV, respectively. Furthermore, thickness- and surface-termination-dependent magnetocrystalline anisotropies of the $CrPt_3$(001) films are discussed.

• Korean Journal of Food Science and Technology
• /
• v.11 no.1
• /
• pp.1-7
• /
• 1979

This experiment was carried out to investigate the nutritive value of brewery's activated sludge on the performance and nutrients utilization of egg type chicken of babcock fed the different levels of sludge. The chemical composition, content of amino acids and mineral in brewery's activated sludge were also analyzed. 3,6,9 and 12% of brewery's activated sludge were supplemented with basal ration as a substituted ingredient to soybean oil meal in experimental ration. The results obtained were as follow: 1. Chemical composition analysis 1) Brewery's activated sludge had 42.50% of crude protein on the air dried basis, and had 15,69% of crude ash, and had 2,060 kcal of metabolizable energy per kg of sludge. 2) Total amino acid content of brewery's activated sludge was 42.50% and 99% crude protein of brewery's activated sludge was a true amino acid, and brewery's activated sludge contained especially more methionine and threonine that those of soybean oil meal. 3) In case of mineral content of brewery's activated sludge, phosphorus, magnesium, copper and iron were plentifully included. However, calcium content in brewery's activated sludge was very low. 2. Feeding trial 1) Body gain of chicken fed the different levels of sludge was decreased in proportion to increasing level of sludge was decreased in proportion to increasing level of sludge. However, no statistical differences were found out between treatments. 2) Diet intake of chicken fed the different levels of sludge was significantly (p<0.05) increased as the supplementation level of sludge in ration increased. 3) Feed conversion of chicken fed the different levels of sludge was high in proportion to increasing level of sludge in ration. However, there were no significant differences between treatments. 3. Digestion trial 1) Utilization of dry matter of chicken fed the different levels of sludge was decreased as the level of sludge in ration increased. However, no statistical differences were found out between treatments. 2) Utilization of crude protein of chicken fed the different levels of sludge was significantly (p<0.01) increased as the level of sludge was higher. Utilization of crude protein of control treatment and of sludge 3% treatment was higher than that of other treatments. 3) Utilization of crude ash of chicken fed the different levels of sludge was significantly (p<0.05) decreased in proportion to increasing level of sludge in ration. 4) Utilization of NFE of chicken fed the different levels of sludge was slightly decreased in proportion to increasing level of sludge in ration. However, no statistical differences were found out between treatments. Therefore according to this experiment, it may be concluded that brewery's activated sludge can be supplemented with chicken ration by $6{\sim}9%$.

• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.392-398
• /
• 2009

This study identified risk factors of cross-contamination of foodborne pathogens and established a good agricultural practice (GAP) system for an agricultural products processing center (APC) for perilla leaves. All samples were collected before and after a standard work shift at the APC, while perilla leaves were also collected after each step in the APC. In addition, the workers and their surroundings were sampled by swabbing. The total plate count (TPC) and coliform count in the water samples increased significantly (p<0.05) to 3.36 and 1.73 log CFU/mL after work, respectively. However, no Escherichia coli and Listeria monocytogenes were detected. The bacterial populations of the workers and their surroundings did not differ significantly (p${\geq}$0.05) before and after work. However, Staphylococcus aureus (<1.66 log CFU) was detected at a high rate (13-50%) in the basket, packing table, gloves and cloth. Although perilla leaves passed through the washing steps, the TPC and coliform bacterial populations on the final products were higher (p${\geq}$0.05) than those of unwashed perilla leaves, which indicates that the washing system was not functioning properly. Accordingly, a GAP system with a better washing system should be employed at this facility.