• 한국BIM학회 논문집
• /
• 제7권2호
• /
• pp.16-24
• /
• 2017

It is very important to estimate accurate construction total cost needed early in the project. In the initial phase of the design, the project cost estimates are determined by total quantity from design documents and the variables that affect the calculation of the total cost of the project. In order to determine accurate total construction cost, the contractor has to produce detailed quantity information based on the drawings and specifications. The process of preparing quantification and cost estimation documents is still being worked out manually, and a lot of errors have been occurred in many cases. Recent advances in information technology have led to the BIM based quantity takeoff and cost estimation. However, there are some limits to the extent to which the current specifications for BoQ documents are computed from BIM model. This research analyze the current BoQ cases and analyze how to make quantity takeoff possible through BIM. The study defined five levels of quantity category that could be produced by BIM. Only about 40% or indirectly usable items can be used when information is extracted to BIM modelling. This is very insufficient to fill out the BoQ. The BoQ document structure quantity takeoff specifications should be simplified in order to BIM based cost estimation more efficiently.

• 한국안전학회지
• /
• 제24권5호
• /
• pp.48-56
• /
• 2009

This paper presents the procedure for the optimal design of a PSC-I girder bridge considering life cycle cost (LCC). The load carrying capacity curves for the concrete deck, PSC-I girder and $\pi$-type pier were derived and used for the estimate of service lives. Total life cycle cost for the service life was calculated as sum of initial cost, damage cost, maintenance cost, repair and rehabilitation cost, user cost, and disposal cost. The advanced First Order Second Moment method was used to estimate the damage cost. The optimization method was applied to the design of PSC-I girder bridge. The objective function was set to the annual cost, which is defined by dividing the total life cycle cost by the service life, and constraints were formulated on the basis of Korean Standards. The optimal design was performed for various service lives and the effects of design factors were investigated.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권4호
• /
• pp.91-97
• /
• 2012

In this study, cost analysis of electrokinetic (EK) restoration process for desalination of saline agricultural land was performed for field application based on a pilot scale field application. For reasonable cost analysis, EK process was classified into three major parts: system design, installation and operation. Cost of system installation consists of materials and installation for electrode/electric wire, power supply and data monitoring, drainage system, etc. Operation cost was calculated based on electrical consumption and water charges for EK process. Total cost for EK process was 2,943,013 won for $1000m^2$ in greenhouse area. Cost for system installation was 2,553,786 won, that is, 87% of total cost, while cost for system operation was 389,229 won, that is, 13% of total cost.

• 보건행정학회지
• /
• 제8권2호
• /
• pp.88-109
• /
• 1998

The main purpose of this study is to compare the traditional cost system and ABC(Activity Based Cost) system of clinical laboratory department in a hospital. The study subject was 296 services in clinical laboratory from March, 1997 to August, 1997. In a new costing system, cost for a lab test consist of direct cost element, activity based cost element, and allocated common cost element. In a traditional cost system, cost elements included direct cost element and indirect cost allocated based on test volumes The major findings of this research were as follows. 1. In the application of ABC system, total cost was analyzed as follows. Direct cost was 39.3% of total cost. Activity cost and allocation were 20.9% and 39.8%, respectively. The results of analysis to use traditional cost system were as follows. Direct cost was 39.3% and it was as same as the result of direct cost of ABC system. Indirect cost was 60.7%. 2. Activities of clinical laboratory of subject hospital were registration, pre-test operation, test, test result handling, delivery, culture, post-test operation, technical support, management support, and educational support. 3. The differences of the case of higher number of test case being carried out, the cost of ABC system was lower than the cost of traditional cost system. Otherwise in the case of lower number of test case being carried out, the rests have not been appropriately evaluated, and effective management were needed in clinical laboratory.

• 보건행정학회지
• /
• 제13권1호
• /
• pp.23-45
• /
• 2003

This study was performed to evaluate economic effect of the water fluoridation program in Cheong-Ju City from 1982 to 2010. To study this economic effect, this study used cost-benefit analysis methodology from eight years old to fourteen years old in Cheong-Ju City. Major findings were as follows; First, total cost of fluoridation program in Cheong-Ju City was 1,384,164,734 korean won and total benefit was 15,057,426,621 Korean won from 1982 to 2010. Second, total cost which was converted by present value 2000 year was 1,687,412,718 won and total benefit which was converted by present value 2000 year was 14,582,548,519 Korean won. Cost-benefit ratio was 8.64. Net present value which happened from 1982 to 2000 was 7,990,710,155 Korean won and cost benefit ratio was 7.47. In conclusion, by the above result, economic impact of the water fluoridation program was very effective for children in some area of Cheong-Ju city.

• 산업기술연구
• /
• 제31권A호
• /
• pp.135-145
• /
• 2011

This study was conducted to analyze the cost effectiveness in line with total phosphorus standard enforcement of public sewage treatment facilities. The additional cost for the total phosphorus removal process was calculated to analyze the cost effectiveness of the advanced water purification process. The analysis results showed that the T-P removal by coagulation sedimentation was more efficient than the advanced water purification facilities in terms of facilities investment cost, and if the coagulation filteration was used for T-P removal, the activated carbon process among the advanced water purification techniques was more efficient in terms of facilities investment cost. In this study, the effects of the T-P removal process that will be additionally introduced according to the tightening of the effluent T-P standard were analyzed within a limit. The actual benefits of improved T-P concentration in the water source will provide diverse values, including the leisure water, environment improvement water, eco-system in the water source and industrial water, in addition to the advanced water purification.

• International journal of advanced smart convergence
• /
• 제1권2호
• /
• pp.1-11
• /
• 2012

IP-based Wireless Sensor Networks (IP-WSNs) are gaining importance for their broad range of applications in health care, home automation, environmental monitoring, industrial control, vehicle telematics, and agricultural monitoring. In all these applications, a fundamental issue is the mobility in the sensor network, particularly with regards to energy efficiency. Because of the energy inefficiency of network-based mobility management protocols, they can be supported via IP-WSNs. In this paper, we propose a network-based mobility-supported IP-WSN protocol called mSFP, or the mSFP: "Multicasting-supported Inter-Domain Mobility Management Scheme in Sensor-based Fast Proxy Mobile IPv6 Networks". Based on [8,20], we present its network architecture and evaluate its performance by considering the signaling and mobility cost. Our analysis shows that the proposed scheme reduces the signaling cost, total cost, and mobility cost. With respect to the number of IP-WSN nodes, the proposed scheme reduces the signaling cost by 7% and the total cost by 3%. With respect to the number of hops, the proposed scheme reduces the signaling cost by 6.9%, the total cost by 2.5%, and the mobility cost by 1.5%. With respect to the number of IP-WSN nodes, the proposed scheme reduces the mobility cost by 1.6%.

• Journal of Chest Surgery
• /
• 제47권1호
• /
• pp.20-25
• /
• 2014

Background: Symptomatic or asymptomatic patients with significant carotid artery stenosis (range, 70% to 99%) generally undergo either carotid artery endarterectomy (CEA) or carotid artery stenting (CAS) to prevent stroke. In this study, we evaluated the cost effectiveness of these two treatment modalities. Methods: A total of 47 patients (mean age, $67.1{\pm}9.1$ years; male, 87.2%) undergoing either CEA (n=28) or CAS (n=19) for the treatment of significant carotid artery stenosis were enrolled in this study. Hospitalization costs were subdivided into three parts, namely pre-procedure, procedure and resource, and post-procedure costs. Results: Total hospitalization costs were similar in both groups of CEA and CAS (6,377 thousand won [TW] vs. 6,703 TW, p=0.255); however, the total cost minus the pre-procedure cost was higher in the CAS group than in the CEA group (4,948 TW vs. 5,941 TW, p<0.0001). The pre-procedure cost of the CEA group was higher than that of the CAS group (1,429 TW vs. 762 TW, p<0.0001). However, the procedure and resource cost was higher in the CAS group because the resource cost was approximately three times higher in the CAS group than in the CEA group. The post-procedure cost was higher in the CEA group because hospital stays were approximately two times longer. Conclusion: The total hospitalization cost was not different between the CEA and the CAS groups. The pre-procedure cost was high in the CEA group, but the cost from procedure onset to discharge, including the resource cost, was significantly lower in this group.

• 대한간호학회지
• /
• 제30권6호
• /
• pp.1580-1591
• /
• 2000

This study was conducted to assess the amount of nursing services for psychiatric inpatients and to estimate psychiatric nursing costs by using the RBRVS. Full details of medical services, including physician and nursing services, for psychiatric inpatients were surveyed and data of general characteristics of hospitals and patients were also collected. The cost of nursing activities was estimated by the multiple conversion factor which was drawn from the Korean RBRVS Development Project to the RBRVS score of each nursing activities, which was drawn from the results of Korean Nurses Association (KNA)'s projects about nursing RBRVS development and cost of nursing activities. The data about 89 inpatients from 3 general hospitals with psychiatric departments were analyzed. The total cost of nursing activities for each patient per admission day was from KRW 22,185 to KRW 27,954 by hospital, and KRW 25,220 in average. The percent of nursing cost to the total cost of medical services was from 36% to 48% by characteristics of patients and 41.4% in average. The cost of nursing activities estimated in this study was between the existing NHI fee schedule and the one suggested by KNA. It is considered as appropriate and acceptable level compared to the total amount of medical services. In the process of KNA's activities to get nursing fee in NHI fee schedule, results of additional studies to estimate the cost of nursing activities balanced with total cost of medical services in every departments should be found and utilized.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.216-223
• /
• 1993

The safety factors of current standard code are considered to be not appropriate compared to design and construction practices, even this safety factors are not determined from probabilistic study but merely from experiences and practices. This study pripose the optimum safety indices based on expected total cost minimization using only three parameters, which are the level of the failure cost to the initial cost by improvement in safety, and the order of the initial cost function.