• 한국의류학회지
• /
• 제48권1호
• /
• pp.66-81
• /
• 2024

This study analyzed body shape changes over time by comparing Size Korea's data on 50-84-year-old women from 2020 to 2021 with the same data from 2003 to 2004. In addition, the subjects of these data were divided into drop-types and also upper-body-drop-types with the body measurements for each type compared. The results showed that elderly women had grown 3-4 cm taller over the last 20 years, but the length of 'neck shoulder point to breast point' had become shorter; the bust and waist circumferences were smaller, but the thigh circumference was larger. In the body-drop type, the bust circumference, waist circumference, and waist circumference(Omphalion) increased by about 4-6cm in the order of N-type < H-type < Y-type indicating that the sideline slope of the torso must be differentiated. The upper-body-drop-type showed a 1-cm difference in height and bust circumference, but a 4 to 5-cm difference in waist circumference. In addition, thick-waist subjects aged 70 or older were classified into separate body types with the results showing that their waist circumference was greater than their breast circumference, signifying the need for different top patterns.

• 복식
• /
• 제57권4호
• /
• pp.9-17
• /
• 2007

Somatotype is human body shape and physique type which can be classified not only by the size, but also by the shape or posture of the body. Postural variations in the alignment of the back, shoulder, and neck can have an adverse effect on the fit of garments designed to hang from the shoulders. There have been some previous studies about the lateral upper torso by analyzing photographic measurements. In this study, 3D body scan images were used to classify the side somatotype of upper lateral method even though they are major data in the classification of upper torso. This study focused on following objective.; 1) To apply new and developing technology into the apparel industry analyzing 3D body scan images. 2) To classify upper laterla torso using the data through the new improver technology, 3D body scanner. 3) To propose basic materials for well fitted garments for each type of figure. The test subjects for this study were two hundreds nine female aged 19 years and up who were recruited in Cornell university body scan research team. Seventeen Variables(12 angles, 5 lengths) out of 3D body scan data were measured based on these landmarks and applied to analyze. The result of factor analysis indicated that 6 factors were extracted through factor analysis and orthogonal rotation by the method of Varimax and those factors comprise 62.5% of total variance. And the somatotype of upper body is classified into 3 types of figures according to cluster analysis; Bent forward posture, Straight posture, Swayback posture. Future study could be addressed about the somatotype of body by the age group based on the large database with wide variety of age.

• 복식문화연구
• /
• 제18권5호
• /
• pp.892-907
• /
• 2010

The purpose of this study was to compare torso pattern made by draping and flat pattern method in terms of the size of breast. The size of this study was classified as 75A and 75D according to the size of breast. Each torso pattern by the combination of the size and pattern method was compared and analyzed. In order to test the fit of the draping and flat pattern that was developed according to the size of breast, the outer appearance was evaluated. The results of the study were as follows: First, The most striking size difference was difference between the front and the back on bust line level, which decides on position of the side seam in comparison of size between draping and flat pattern of 75A and 75D. In the flat pattern, the difference between the front and the back in the size of breast was consistent regardless of a change in the size of breast. However, in the draping, the bigger breast led to the bigger difference between the front and the back on bustline level. Second, the flat pattern in 75D was evaluated to be the worst in 27 items among total 46 items for the evaluation of outer appearance in the draping and flat pattern of 75A and 75D. Third, regardless of size, the draping was evaluated to be more suitable in the areas related to neck, arm hole, and waist dart than the flat pattern. These results are suggesting that the draping is a method of reflecting characteristic of the body type more accurately than the flat pattern, and that the draping is a more suitable method than the flat pattern for the design of clothing pattern of the body type with big breast like 75D.

• 복식
• /
• 제26권
• /
• pp.279-288
• /
• 1995

The objective of the study was to provide fun-damental data on somatotype for elderly women by classifying the somatotype and analyzing the characteristics of their somatotype. The subjects were 368 women ages of 60∼84, they were measured direct anthropometry. In or-der to find out differences among the age groups, the 368 subjects were grouped into two age groups(Group 1 aged 60 to 69, Group 2 ; aged 70 to 84) Data were analyzed using Factor analysis, Cluster analysis, Duncan test and Analysis of variance. The results of this study were as follows. 1. The characteristics of Elderly women's somatotype were bending of the upper-torso, fat-ness of the waist and abdomen, drooping of the bust and shoulder and hip. In addition, height, girth, depth and width items were decreased in their sizes respectively. 2. Through the factor analysis, we extracted 5 factors from anthropometric measurements. Factor components were obesity, height, girth of the leg and arm, length of the upper-torso except the center front length, the center front length, we categorized by 4 clusters using 5 factor scores. And after the cluster analysis using 5 factor scores, 4 clusters were categorized. The characteristics of clusters were as follows. Type 1 was characterized by short, obesity type, and droopy bust. Type 2 was characterized by short and slender type, dropped bust, and bending somatotype from the lateral view. Type 3 was characterized by middle sized and straight somatotype from the lateral view. Type 4 was characterized by tall and obese type from the lateral view.

• 한국의류산업학회지
• /
• 제20권4호
• /
• pp.439-448
• /
• 2018

This thesis intends to suggest a new wedding dress pattern through researches on history and changes of wedding dress, researches on silhouette and details and analyses of existing basic patterns. In this study, to develop torso patterns of top dresses selected as preferred designs through literature reviews and company surveys, dress form sizes suitable for standard sizes were selected and study basic patterns were made using draping techniques. The study finds characteristics of body type dimension that is changed when wearing brassiere (hereinafter, 'bra') for wedding dress through customer surveys for development of basic patterns of wedding dress. That is, wearing wedding bra was used for the purpose of increasing the bust size and we will evaluate later whether this increase helps completeness of aesthetic impression through wearing evaluation. As the result, it was found out that top torso pattern wearing wedding bra made wearers feel more comfortable and in the aspect of aesthetic impression, it provided impacts on women's beautiful silhouettes. The effects of whether a bra is used or not on changes in patterns were reviewed through the degree of polymerization of finished patterns. When a bra for dresses was worn, the waist front length increased by1.7cm, the bust circumference increased by 2.1cm, and the amount of dart increased by 1.5cm in the patterns. A new torso pattern for top dresses, which will solve problems evaluated in each of the above from the aspect of composition of pattern by a method through analysis of existing basic patterns and multi-dimensional cut patterns wearing wedding bra, will be suggested.

• 복식
• /
• 제38권
• /
• pp.279-288
• /
• 1998

The purpose of this paper was to find out obese women's respective characteristics of torso body shape. The subjects were 132 obese women for direct measurement and were 101 obese women for indirect measurement, age of 20~59. The criterial of obesity base on Rohrer index($\geq$1.6) and busts girth ($\leq$90). The results were as follows : 1) In comparison with the average body shapes in common body types, in 30's was bigger in the bust and waist girth than the different age groups. 2) According to the difference in the basic girth(bust and waist girth, hip and bust girth, hip and waist girth) the body types were classified 2 groups. Types 1 was large bust and slightly curved from waist to hip. Type 2 was large hip and larger in the curve from waist to hip than type 1.

• 한국생활과학회지
• /
• 제15권6호
• /
• pp.1073-1081
• /
• 2006

The development of foundation garment pattern on the typical adult women's body was carried out. By means of the flatted body surface shell, the foundation garment pattern was developed. And its fitting test also performed. The results of this study can be summarized as follows; 1. The investigated Foundation basic pattern was made by the allowing the maximum bust size without any surplus since it was based on the tight-fitted model drawing technique. The investigated the completed pattern was designed in three parts of front and back body, including bust. 2. The result showed by overlapping the torso basic pattern foundation and body surface development selected from body almost the same except for the shift of dart position. 3. The result by overlapping basic pattern 3 existing basic patterns. On the basis of top-bust line showed that the setting up the volume of dart of bust and its waist affect the appearance of model. Especially, it was found that the above result was related to the bust and under bust line. 4. The result of the wearing test of 3 existing basic patterns and basic pattern of this study revealed that the mean values of whole items were higher than average in type P and type E. The fitting & position of under-bust line and extent of wrapping bust showed the high points in the current study and type of P. The result of evaluating the whole appearance in three points(front, side, back) showed different according to the every basic foundation garment pattern.

• International Journal of Costume and Fashion
• /
• 제3권
• /
• pp.13-24
• /
• 2003

The purpose of this study was to examine the changes brought by the upper body form using a three-dimensional human body measurement the gypsum method. The developed plane figure was constructed using paper replica to analyze the dimensional shape of the upper torso and to be able to design clothes suitable for elderly women's physical characteristics. The characteristics are analyzed and compared with existing patterns in order to extract the components for the pattern design. The examination was carried out based on the developed plane figures of upper body surface replicas. Type 1, the bent-forward body form, has a wide gap on the shoulder. In Type 2, the gap of waist line was wide at angulus scapulae point. Type 3 was the thin body form, and the girth of the chest, front interscye breadth and back interscye breadth were more level with one another, compared to the other types. In Type 4, the bent-backward body form, there was a wide gap on front shoulder. Comparison with the developed plane figure and existed pattern, items revealed differences in significance included the front and back interscye width between the measured values of the existed patterns and the developed plane figure. Therefore, the basic components of basic bodice pattern for old women were determined in the up-bust circumference and length of the back.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.230-237
• /
• 2022

It is difficult to predict industrial accidents in the construction industry because many accident factors, such as human-related factors and environment-related factors, affect the accidents. Many studies have analyzed the severity of injuries and types of accidents; however, there were few studies on the prediction of injured body parts. This study aims to develop a classification model to predict the part of the injured body based on accident-related factors. Construction accident cases from June 2018 to July 2021 provided by the Korea Construction Safety Management Integrated Information were collected through web crawling and then preprocessed. A naïve Bayes classifier, one of the supervised learning algorithms, was employed to construct a classification model of the injured body part, which has four categories: 1) torso, 2) upper extremity, 3) head, and 4) lower extremity. The predictor variables are accident type, type of work, facility type, injury source, and activity type. As a result, the average accuracy for each injured body part was 50.4%. The accuracy of the upper extremity and lower extremity was relatively higher than the cases of the torso and head. Unlike the other classifications, such as spam mail filtering, a naïve Bayes classifier does not provide a good classification performance in construction accidents. The reasons are discussed in the study. Based on the results of this study, more detailed guidelines for construction safety management can be provided, which help establish safety measures at the construction site.

• 한국생활과학회지
• /
• 제6권2호
• /
• pp.145-155
• /
• 1997

The purpose of this study is to analyze the body type of children's, especially torso, and to provide the fundamental data for children's clothing construction which can reflect the characteristics of their bodies. The subjects for photographic measurements are 308 elementary school children aged from 6 to 8 living in Seoul and urban area. Anthropometric measurements were performed indirectly from the pictures of subjects. The data were analyzed statistically using SPSSWIN. The results obtained from this study are as follows: 1. Through one-way ANOVA, items for heights, breaths, weight reveals the significant differences according to ages and genders. 2. Through Pearson correlation, it turns out that there are high correlation between any items of heights, but there is no correlation for item of shoulder inclination with any other items. 3. Through factor analysis of principal component model, six factors were extracted which covers 83.6% of the whole information. The first factor represents the items of heights which relates with linearity. The second factor describes the items of breaths, depths, and weight in relation with laterality. The third factor were gathered with depths of front and back in relation with posture of side, which proves as important one to characterize the children's torso. The other factors represents the items of posture of neck, depths in neck, shoulder inclination, respectively. 4. Through one-way ANOVA in factor by group, and Scheffe multi comparison test for each group, the factor 1 that is related with linearity reveals the significant differences according to ages and genders.