• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.151-155
• /
• 2005

Though the nuclear fusion system has been fused into hydro-nuclear based on thermodynamics by tokamak system, there has been no success story. Because it's impossible to confine high temperatured plasma long Time actually. New nuclear-fusion-system using this nuclear-fusion-method will gather toroidal-magnetic-field by putting Core Block(C shaped torus iron) and toroidal-aluminium coil into toroidal magnetic-field-aluminium. That will arrange the nuclear-fusion-route on a gap fallen out by a part of cut torus-core and mkee the toroidal-an electric-current flow and electrolyze the fusioned-material (an electrolyte) into troidal-electrocity. That consists of troidal-magnetic-fild coil, toroidal-coial fusioned- material, series circuit. So toroidal-electocity will be changed into filament-electrocity and be introjected into fusioned-material. In a sapce on filament-electrocity, the magnetic inhaling-powr will enlarge to input-electrocity outside. This will exceed the Coulomb force and reache the nuclear-fusion. By this phenomenon there be quantity-loss. By this process I could confirmed that Einstein euation$(E=mC^2)$ releases into thermal energy.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.3
• /
• pp.78-83
• /
• 1991

This study proposes a unified method to design toroidal transformer and its optimal design algorithm. This unified design method was derived from the fundamental equation of power on the basis of electromagnetic energy of a core and the definition of three parameters(K1, K2, KW) that influence the form of a core and the ratio of a core and coil. Accordingly this design method condenses the whole data for design of toroidal transformer to a standard variable which is the inner diameter of a core. The minimal cost, weight and volume values of the transformer were computed by means of the algorithm to search the optimal values of the parameters. Furthermore, through the CAD, the efficiency of this unified design method and optimal algorithm proposed in this paper was confirmed.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.27-30
• /
• 1991

With the recent development of high performance AC superconducting wire of very small ac loss and large current carrying capacity, the possibility of superconducting air core transformer is being studied. The air core transformer has merits of no iron loss, no insulation to the core and no harmonics. But the air core transformer has large exciting current and low magnetic coupling factor. To increase the coupling factor, the transformer of toroidal shape is proposed and designed. (10KVA, 110/220V) Compared with air core transformer of solenoidal shape, the performance is improved. The exciting current occupies about 22% of the rated current.

• Journal of the Korean Magnetics Society
• /
• v.24 no.3
• /
• pp.76-80
• /
• 2014

Toroidal cores made of metallic powder requires large magnetic field strength up to few decade kA/m to obtain major hysteresis loop. To overcome thermal heat generation problem from large exciting current during measurement, we have employed a real time hysteresis loop tracer which can digitize and calculate B-H signals in personal computer as real time. For example, when we magnetize specimen at 10 Hz frequency, we could display hysteresis loops 10 times per second. Using the real time hysteresis loop tracer, we could measure major hysteresis loop of toroidal shape metallic powder core at maximum flux density or maximum magnetic field strength to be measured within 5 second not to significant increasement of specimen temperature due to the heat dissipation from coil windings. For the constructed hysteresis loop tracer, we could measure hysteresis loop at magnetic field strength higher than 50 kA/m for the toroidal shape specimen.

• Kyungpook Mathematical Journal
• /
• v.47 no.3
• /
• pp.335-340
• /
• 2007

Let M be a hyperbolic 3-manifold such that ${\partial}M$ has at least two boundary tori ${\partial}_oM$ and ${\partial}_1M$. Suppose that M contains an essential orientable surface P of genus $g$ with one outer boundary component ${\partial}_oP$, lying in ${\partial}_oM$ and having slope ${\lambda}$ in ${\partial}_oM$, and $p$ inner boundary components ${\partial}_iP$, $i=1$, ${\cdots}$, $p$, each having slope ${\alpha}$ in ${\partial}_1M$. Let ${\beta}$ be a slope in ${\partial}_1M$ and suppose that $M({\beta})$ is toroidal. Let $\hat{T}$ be a minimal essential torus in $M({\beta})$, which means that $\hat{T}$ is pierced a minimal number of times by the core of the ${\beta}$-Dehn filling, among all essential tori in $M({\beta})$. Let $T=\hat{T}{\cap}M$ and denote by $t$ the number of components of ${\partial}T$. In this paper we prove: (i) if $t{\geq}3$, then ${\Delta}({\alpha},{\beta}){\leq}6+\frac{10g-5}{p}$, (ii) If $t=2$, then ${\Delta}({\alpha},{\beta}){\leq}13+\frac{24g-12}{p}$, (iii) If $t=1$, then ${\Delta}({\alpha},{\beta}){\leq}1$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1591-1599
• /
• 2017

In power electronics applications which switching frequency is below audible frequency, the acoustic noise and vibration design of magnetics are as important as the efficiency. In the case of the powder core, which is widely used in grid-connected inverters, many researches have been progressed in terms of efficiency. However, there are only few research have been progressed related with acoustic noise and vibrations. In this paper, the Sendust(Fe-Si-Al) powder core material which has low magnetostriction and low core loss is analyzed in terms of acoustic noise and vibration induced by Maxwell force and magnetostriction. Three building structures such as, rectangular, toroidal, and oval shape are designed for 4kW grid-connected inverter, because magnetic properties and the audible noises of the inductor are varied by magnetic core building structures. The effects of the Maxwell force and magnetostriction behaviors varied with core shapes are analyzed by finite element method and experiments. In addition, experiment results of the inductor efficiency are presented according to core building structures.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1104-1107
• /
• 2005

This paper presents a comparison of core losses for the four cases of Switched Reluctance Motors (SRM) with different winding method and switching sequence. With concentrated winding SRM, two kinds of switching sequence are considered for one-phase exciting and two-phase simultaneously exciting driving. With both distributed winding and toroidal winding, two-phase exciting driving is considered. The ratio of calculated core losses to input power is able to be used a guide or reference for deciding the winding method and switching sequence of in the initial design stage of SRM.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.599-605
• /
• 2019

Ferrite cores are used as a soft magnetic material in the fabrication of couplers for inductive powerline communication (PLC). However, it is difficult to adjust the size freely according to the power-line and power-grid environment. In this paper, we report that a nano-crystalline alloy with higher permeability than ferrite can be used as an inductive coupler for non-contact PLC. Since nano-crystalline are produced in the form of a thin ribbon, the size of the coupler can be freely controlled by the number of ribbons wound on the toroidal core. It was fabricated with induction type coupler and showed to be suitable for non-contact power line communication. Experimental results show that the communication bandwidth is 45 Mbps for 100 m and 8 Mbps for 200 m under the current fluctuation of less than 100 A, and the reception ratio is 100%.

• Journal of the Korean Magnetics Society
• /
• v.7 no.6
• /
• pp.327-333
• /
• 1997

We designed and constructed the high frequency magnetic characteristics measurement system to measure core loss, B-H curve, permeability of toroidal ferrite core, amorphous core and various materials for high frequency application. The system consists of universal equipments such as digitizing oscilloscope, signal generator, power amplifier, PC in order to make upgrade easily. The power source is composed of waveform synthesizer and power amplifier ranging from DC to 20 MHz, and output signal H and B from sample core are digitized by oscilloscope with sampling rate 1 GS/ s per channel. Computer controls power source and oscilloscope, reads data from oscilloscope, displays analyzed waveform and saves data with file. The entire procedures finishes within few seconds.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.117-124
• /
• 1993

This paper presents the study on the magnetic field analysis of magnetid deflection yoke using integral equation method. An integral equation method is developed for the computer modeling of the magnetic fields produced by color CRT and T.V. deflection yoke. Deflection of electron beams using magnetic fields is applied in a variety of display instruments such as te.evision receivers, electron probe instruments, etc. The magnetic field is solved by dividing these into the finite elements in the whole domain : the saddle coil which deflects the electron heam horizontally, the toroidal coil which deflects it vertically, magnetic core which enhances the magnetid fields genterated by the both coils. Using oblate spheroidal coordinates, this paper has had an easier access to the shape of magnetic deflection yoke chasing the boundaries than other coordinates.