• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.672-675
• /
• 2005

To imprint 70-nm wide line-patterns, we used a newly developed ultraviolet nanoimprint lithography (UV-NIL) process in which an elementwise patterned stamp (EPS), a large-area stamp, and pressurized air are used to imprint a wafer in a single step. For a single-step UV-NIL of a 4' wafer, we fabricated two identical $5'\times5'\times0.09'(W{\times}L{\times}H)$ quartz EPSs, except that one is with nanopatterns and the other without nanopatterns. Both of them consist of 16 small-area stamps, called elements, each of which is $10\;mm\;\times\;10\;mm$. UV-curable low-viscosity resin droplets were dispensed directly on each element of the EPSs. The volume and viscosity of each droplet are 3.7 nl and 7 cps. Droplets were dispensed in such a way that no air entrapment between elements and wafer occurs. When the droplets were fully pressed between ESP and wafer, some incompletely filled elements were observed because of the topology mismatch between EPS and wafer. To complete those incomplete fillings, pressurized air of 2 bar was applied to the bottom of the wafer for 2 min. Experimental results have shown that nanopatterns of the EPS were successfully transferred to the resin layer on the wafer.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.3
• /
• pp.117-127
• /
• 1995

In this paper, we suggest a motion analysis method using ART-I1 competitive learning neural network and fuzzy reasoning by matching the same objects through the consecutive image sequence. we use the size and mean intensity of the region obtained from image segmentation for the region matching by the region and use a ART-I1 competitive learning neural network wh~ch has a learning ability to reflect the topology of the input patterns in order to select characteristic points to describe the shape of a region. Motion vectors for each regions are obtained by matching selected characteristic points. However, the two dimensional image, the projection of the the three dimensional real world, produces fuzziness in motion analysis due to its incompleteness by nature and the error from image segmentation used for extracting information about objects. Therefore, the belief degrees for each regions are calculated using fuzzy reasoning to l-nanipulate uncertainty in motion estimation.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.314-323
• /
• 2002

The routing protocols designed for wired networks can hardly be used for mobile ad-hoc networks due to limited bandwidth of wireless transmission and unpredictable topological change. Recently, several routing protocols for mobile ad-hoc networks have been Proposed. However, when theme protocols are applied to support real time services like multimedia transmission, they still have problems in ad-hoc networks, where the topology changes drastically. In this paper, we propose a new route selection algorithm which selects the most reliable route that is impervious to route failures by topological changes by mobile hoots. For reliable route selection, the concept of virtual zone (stable zone and caution zone) is proposed. The zone is located in a mobile node'transmission range and determined by mobile node's mobility information received by Global Positioning System (GPS). The proposed algorithm is applied to the route discovery procedure of the existing on-demand routing protocol, AODV, and evaluated by simulation in various traffic conditions and mobility patterns.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.224-232
• /
• 2002

The routing protocols designed for wired networks can hardly be used for mobile ad-hoc networks due to limited bandwidth of wireless transmission and unpredictable topological change. Recently, several routing protocols for mobile ad-hoc networks have been proposed. However, when these protocols are applied to support real time services like multimedia transmission, they still have problems in ad-hoe networks, where the topology changes drastically. In this paper, we propose a new route selection algorithm which selects the most reliable rouse that is impervious to route failures by topological changes by mobile hosts. For reliable route selection, the concept of virtual zone (stable lone and caution zone) is proposed. The lone is located in a mobile node's transmission range and determined by mobile node's mobility information received by Global Positioning System (GPS). The proposed algorithm is applied to the route discovery procedure of the existing on-demand routing protocol, AODV, and evaluated by simulation in various traffic conditions and mobility patterns.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.3
• /
• pp.417-430
• /
• 2024

As modern technology advances and the proliferation of the internet continues, cyber threats are also on the rise. To effectively counter these threats, the importance of utilizing Cyber Threat Intelligence (CTI) is becoming increasingly prominent. CTI provides information on new threats based on data from past cyber incidents, but the complexity of data and changing attack patterns present significant analytical challenges. To address these issues, this study aims to utilize graph data that can comprehensively represent multidimensional relationships. Specifically, the study constructs a heterogeneous graph based on malware data, and uses the metapath2vec node embedding technique to more effectively identify cyber attack groups. By analyzing the impact of incorporating topology information into traditional malware data, this research suggests new practical applications in the field of cyber security and contributes to overcoming the limitations of CTI analysis.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.509-512
• /
• 2009

Powder diffraction patterns of the zeolite mesolite ($Na_{5.33}Ca_{5.33}Al_{16}Si_{24}O_{80}{\cdot}21.33H_2O$), with a natrolite framework topology were measured as a function of pressure up to 5.0 GPa using a diamond-anvil cell and a $200{\mu}m$-focused monochromatic synchrotron X-ray. Under the hydrostatic conditions mediated by pore-penetrating alcohol and water mixture, the elastic behavior of mesolite is characterized by continuous volume expansion between ca. 0.5 and 1.5 GPa, which results from expansion in the ab-plane and contraction along the c-axis. Subsequent to this anomalous behavior, changes in the powder diffraction patterns suggest possible reentrant order-disorder transition. The ordered layers of sodium- and calcium-containing channels in a 1:2 ratio along the b-axis attribute to the $3b_{natrolite}$ cell below 1.5 GPa. When the volume expansion is completed above 1.5 GPa, such characteristic ordering reflections disappear and the $b_{natrolite}$ cell persists with marginal volume contraction up to ca. 2.5 GPa. Further increase in pressure leads to progressive volume contraction and appears to generate another set of superlattice reflections in the $3c_{natrolite}$ cell. This suggests that mesolite in the pressure-induced hydration state experiences order-disorder-order transition involving the motions of sodium and calcium cations either through cross-channel diffusion or within the respective channels.

• Korean Journal of Microbiology
• /
• v.49 no.4
• /
• pp.383-390
• /
• 2013

Lateral gene transfer (LGT) of genes from other bacteria into Vibrio cholerae is expectable because of the pronounced natural competence of the bacterium. In this study, quantitative aspects of LGT among the three species of Vibrio pathogenic to humans were characterized. Genome sequences of V. cholerae N16961, V. parahaemolyticus RIMD2210633, V. vulnificus CMCP6, and Escherichia coli K12 substrain MG1655 were analyzed to determine orthologous quartets of protein coding genes present in all four genomes. Phylogenetic analyses on the quartets were conducted to resolve vertical versus lateral patterns of gene polymorphisms based on congruence versus incongruence of phylogenetic trees. About 70% of the quartets could be resolved as either cohesive topology (75%) or LGT tree topologies (25%). The amount of LGT genes in Vibrio spp. appeared to be abnormally high for a genus and comparable to those of families. Patched distributions of LGT from different donors were observed on a chromosome. In the small chromosome of V. cholerae, physical linkages among LGT loci spanned half the length of the chromosome. Either accumulative selection for the donor alleles in LGT or presence of large-scale LGT events was hypothesized. These findings warrant further studies on the nature of donor-specificity of LGT alleles and its influence on evolution of Vibrio virulence to humans.

• The Korean Journal of Mycology
• /
• v.30 no.1
• /
• pp.23-30
• /
• 2002

The genetic variations and the rate of mycelial growth in the dikaryon and the monokaryon stages of Pleurotus spp. were surveyed during their subcultures. The highest growth rate was observed on both the 3rd and the 4th subcultures. The remarkably rapid growth rate was detected in P. ostreatus dikaryon. Genetic similarities in the dikaryon and the monokaryon of P. ostreatus were more than 57.5% and 85.7%, respectively, and those of P. eryngii were more than 85.2% and 84.8%, respectively. The genetic similarities of monokaryotic P. ostreatus were higher than those of dikaryotic. The topology of phylogenetic trees showed that the divergence and the clustering patterns of branch did not correlated with the number of subcultures. This suggests that genetic variations occur very randomly on mycelial cultures. These results suggest that the monokaryotic mycelia is genetically more stable than the dikaryotic in subcultures, and that it is very useful to stock monokaryotic mycelia for making spawns and breeding of Pleurotus spp.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.575-583
• /
• 2017

Various types of flow patterns around the stepped weir and spillway, such as the skimming flow over such structures and the wave-type flow with a standing undular hydraulic jump and roller downstream of the structures, are developed in open channels. Unsteady three-dimensional numerical simulations are carried out using a hybrid RANS-LES turbulence modeling approach and the volume of fluid method for resolving free surface fluctuations to represent the turbulent flow including the skimming flow and wave-type flow over a stepped weir installed in a rectangular channel. The comparison of numerical results with an existing experimental measurement reveals that the present numerical simulations reasonably well reproduce the turbulent flow passing the stepped weir, in terms of time-averaged velocity profiles at selected locations downstream of the weir, flow topology characterized by the wave-type and skimming flows, the maximum height and length of the standing wave and the length of reattachment of recirculating zone. The numerical result further elucidates the distinct flow behaviors of the wave-type and skimming flow by presenting instantaneous intense variations of free surface and velocity vectors, the distributions of Reynolds shear stress and turbulent kinetic energy and three-dimensional complex features of coherent structures and total pressure distribution.

• Journal of the Korean Geographical Society
• /
• v.37 no.3
• /
• pp.237-246
• /
• 2002

This study classified wintertime bioclimatic zones of South Korea based on daytime and nighttime distribution of wind chill index calculated from climate data during the coldest month for latest 30 years (1971- 2000). The results show that the winter daytime and nighttime wind chill index were influenced by climatic factors such as elevation, land-sea breeze, topology, and sea currents etc. as well as climatic components such as temperature, wind speed, and sunshine, so that South Korea was divided into five bioclimatic zones; Cool day- cold night zone, Keen day- Cold night zone, Keen day-Very Cold night zone, Cold day and night zone, and Cold day-Extremely Cold night zone. Especially, coasts and island areas, except for south coast of Korea, shows Keen bioclimatic response during daytime and Very Cold bioclimatic response during nighttime. This indicates that coasts and island areas, except for south coast of Korea are affected by moonson and land-sea breeze. In addition, highly elevated Daegwallyeong shows Cold bioclimatic response during daytime and Extremely Cold during nighttime due to the influence of adiabatic temperature lapse rate and monsoon. This study offers basic data necessary to make decisions concerning insulation such as clothing and architect etc. by classifying winter bioclimatic zones of South Korea based on various daytime and nighttime distribution of wind chill.