• 전기학회논문지
• /
• 제64권8호
• /
• pp.1161-1167
• /
• 2015

Distribution Management System(DMS) ienhancing distribution automation system-based operation efficiency is an optimized system by various operational applications in a distribution network. DMS employs various applications like topology reconfiguration, volt/var control, and restoration at events such as overload, voltage violation, and a fault in a distribution system. An operation efficiency to employ multi-applications as restoration with short-term load forecasting is higher than a performance by a single application; and the applications are accomplished by an operator’s control. Applications’ combination is determined by various alarm information which means critical issues in order to operate a distribution system. Thus, this paper proposes an application management system which can configure application combination, control applications depending on alarm information and check their performance condition. The proposed application management system can be customized by operator easily and have high operation efficiency and reliability because it is worked by reviewed alarm information from operator.

• 정보처리학회논문지C
• /
• 제14C권5호
• /
• pp.453-462
• /
• 2007

NGN은 QoS가 지원되는 광 대역 전달 망에서 세션 및 비-세션 서비스를 지원하기 위한 패킷 기반의 융합 망이다. NGN의 RACF(Resource and Admission Control Functions)는 전송망의 토폴로지 및 자일 상태 정보곤 수집하기 위하여 COPS와 SNMP를 자원 관리 프로토콜로 고려하고 있다. 본 논문에서는 NGN 전송 층의 토폴로지 및 자원 상태 관리를 위한 요구 사항을 정의하며 자원 제어 프로토콜에서 정의되는 데이터 모델들의 일관성을 유지하기 위해 프로토콜 중립적인 정보 모델을 제안한다. 또한, UML로 기술된 정보 모델을 이용하여 웹 서비스 기반의 NGN 자원 관리 시스템을 선계 및 구현하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1454-1470
• /
• 2014

This paper propose a new power conditioner topology with intelligent power management controller that integrates multiple renewable energy sources such as solar energy, wind energy and fuel cell energy with battery backup to make best use of their operating characteristics and obtain better reliability than that could be obtained by single renewable energy based power supply. The proposed embedded controller is programmed for maintaining a constant voltage at PCC, maximum power point tracking for solar PV panel and WTG and power flow control by regulating the reference currents of the controller on instantaneous basis based on the power delivered by the sources and load demand. Instantaneous variation in reference currents of the controller enhances the controller response as it accommodates the effect of continuously varying solar insolation and wind speed in the power management. The power conditioner uses a battery bank with embedded controller based online SOC estimation and battery charging system to suitably sink or source the input power based on the load demand. The simulation results of the proposed power management system for a standalone solar/WTG/fuel cell fed hybrid power supply with real time solar radiation and wind velocity data collected from solar centre, KEC for a sporadically varying load demand is presented in this paper and the results are encouraging in reliability and stability perspective.

• 한국인터넷방송통신학회논문지
• /
• 제9권5호
• /
• pp.1-6
• /
• 2009

MANET(Mobile Ad-hoc NETwork)은 이동하는 노드가 네트워크 위상을 자율적으로 구축하는 특성을 가진 네트워크로써 유선 네트워크와는 다른 여러 가지 특징을 가지고 있다. MANET에서의 정책 기반 망 관리는 노드 간의 QoS를 보장하여 이를 토대로 VANET과 같은 안정성과 편리성을 목표로 하는 응용 분야에 필수적이라 할 수 있다. 본 논문에서는 MANET에 적합한 정책 교환 프로토콜인 COPS-PR을 이용하고 DiffServ 기반의 QoS를 실제 네트워크에서 구현하고 성능을 실험한다.

• ETRI Journal
• /
• 제24권4호
• /
• pp.299-310
• /
• 2002

This paper describes an integrated network management framework for providing point-to-multipoint reservation service (PMRS) in an ATM network. There are two major issues confronting the network service provider in relation to this service: one is to rapidly confirm the acceptability of the subscriber's reservation at subscription time, and the other is to punctually activate the reserved point-to-multipoint service. To meet these requirements, we developed a service provision model (SPM) and a network resource model of a bandwidth allocation timetable (BATT). We propose a point-to-multipoint routing algorithm composed of ordering and backtracking procedures, which can find the best branch point under the complex network topology and can add more destinations to the existing point-to-multipoint route. We demonstrate the feasibility of the SPM, the BATT, and the point-to-multipoint routing algorithm by implementing our schemes and analyzing their performance under the operational ATM network of KT(Korea Telecom).

• 품질경영학회지
• /
• 제28권1호
• /
• pp.105-118
• /
• 2000

In this paper, we consider an interconnection network, DRDT (Dual Receive Dual Transmit), that is a double-loop ring topology and adopts the concept of multiple packets transmission. For three types of DRDT configurations, we investigate some properties related to path sets and discuss the method for finding minimal path sets. Using the concept of the terminal reliability and the path sets approach, we evaluate the reliability of the DRDT networks and compare them with a single ring network and a unidirectional double-loop ring network.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.258_259
• /
• 2009

This paper describes the development of robust processor for analyzing network state in Korean Energy Management System. The important function of topology processing is to convert the switching/device model into a bus/branch model by the status of switching devices. The state estimator also provides a consistent unified solution, not only for measurement of the observable system, but also for the unobservable system. The primary function of the online power flow is to provide a highly reliable and flexible power flow solution that can be used to solve a wide variety of power systems problems. The validity of the newly developed functions has been verified through comparative simulations with the existing EMS functions, which are currently in use in the Korean power system.

• 한국경영과학회지
• /
• 제22권3호
• /
• pp.23-36
• /
• 1997

In the design of telecommunication network, the network configuration using hubbing topology is useful for designing and managing the network efficiently : i. e. all of central offices (COs) are grouped into clusters. Each cluster has one hub consisting of large-scale transmission facilities like digital cross-connect systems and ATMs. In clustering process, the community of interest and geographical factor should be considered. However, there exists a tradeoff between two factors. One is to minimize total link costs for geographical factor and the other is to maximize the total intra-cluster traffics for community of interest. Hence, this can be solved by multiobjective linear programming techniques. In this paper, the problem under considerations is formulated as two p-median subproblems taking into considerations total costs and total intra-traffics, respectively. Then we propose the algorithm to solve the problem based on the concept of cost-traffic tradeoff. The algorithm enables to identify efficient cost-traffic tradeoff pairs. An illustration is also presented.

• Management Science and Financial Engineering
• /
• 제6권2호
• /
• pp.29-45
• /
• 2000

We consider the design of a two-level telecommunication network having logical full-mesh/star topology, with the implementation of conduit systems taken together. The design problem is then viewed as consisting of three subproblems: locating hub facilities, placing a conduit network, and installing cables therein to configure the logical full-mesh/star network. Without partitioning into subproblems as done in the conventional approach, the whole problem is directly dealt with in a single integrated framework, inspired by some recent successes with the approach. We successfully formulate the problem as a variant of the classical multicommodity flow model for the fixed charge network design problem, aided by network augmentation, judicious commodity definition, and some flow restrictions. With our optimal model, we solve some randomly generated sample problems by using CPLEX MIP program. From the computational experiments, it seems that our model can be applied to the practical problem effectively.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1995년도 춘계공동학술대회논문집; 전남대학교; 28-29 Apr. 1995
• /
• pp.603-616
• /
• 1995

Presented in this paper is an algorithm to obtain the intersections of a polyhedral surface composed of triangle facets with a series of parallel planes for extracting machining information from the surface. The change of the topology of the intersection curves is caused by characteristic points of the surface when sectioning the surface with parallel planes. The characteristic points are internal maximum, internal minimum, internal saddle, boundary maximum, boundary minimum, boundary max-saddle, and boundary min-saddle points. The starting points of the intersects are found efficiently and robustly using the characteristic points. The characteristic points as well as the intersection contours can be used to evaluate the machining information for process planning, and to generate NC tool path in CAD/CAM system.