• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.499-502
• /
• 2008

Effects of a dielectric capping layer on the luminous characteristics of top emitting organic light emitting diodes (TOLEDs) have been analyzed using a classical electromagnetic theory. Special attention was given to the influence of the cavity length on the effectiveness of the capping layer. The luminance characteristics of the TOLEDs influenced by the combined effects of the cavity length and the capping layer thickness. Furthermore, these combined effects also modify the emission spectrum and pattern of the TOLEDs, which result in the improvement of total luminance of the device, but no significant change in the device out-coupling efficiency.

• 한국전기전자재료학회논문지
• /
• 제19권9호
• /
• pp.873-877
• /
• 2006

We have fabricated top omission organic light emitting diodes with transparent Ba/Ag double layer cathodes deposited by using thermal evaporation method. The device structure was $glass/Ni(200nm)/2-TNATA(15 nm)/{\alpha}-NPD(15nm)Al_{q3}:C545T\;(1%,\;35nm)/BCP(5nm)/Ba(10nm)/Ag(8nm)$. The optical transmittance of the Ba(10 nm)/Ag(8 nm) layer was over 60 % in the visible wavelength region. The maximum efficiency of the device was $13.7\;cd/A\;at\;0.69\;mA/cm^{2}$ and the efficiency of over 10 cd/A was achieved at wide range of current densities and luminances.

• 반도체디스플레이기술학회지
• /
• 제9권3호
• /
• pp.23-27
• /
• 2010

We prepared Al doped ZnO thin film as a top electrode on a glass substrate with a deposited $Alq_3$ for the top emission organic Light emitting device (TEOLED) with facing target sputtering (FTS) method and radio-frequency (RF) sputtering method, respectively. Before the deposition of AZO thin film, we evaporated the $Alq_3$ on glass substrate by thermal evaporation. And we evaluated the damage of organic layer. As a result, PL intensity of $Alq_3$ on grown by FTS method showed higher than that of grown by RF sputtering method, so we found that the FTS showed the lower damage sputtering than RF sputtering. Therefore, we can expect the FTS method is promising the low-damage sputtering system that can be used as a direct sputtering on the organic layer.

• 한국결정성장학회지
• /
• 제18권4호
• /
• pp.160-164
• /
• 2008

절연성 및 전도성 12CaO ${\cdot}7Al_2O_3$ (Cl2A7)이 도핑된 ITO 박막을 유리기판 위에 radio frequency(rt) magnetron 스퍼터링 방법으로 절연성 및 전도성 Cl2A7 타겟 칩의 개수를 변화시키면서 증착하였다. 이러한 박막들의 구조적, 전기적, 광학적 특성을 살펴보았다. Cl2A7 타겟 칩의 개수가 증가함에 따라 박막의 캐리어 농도는 감소하고, 비저항은 증가하였다. 박막의 광 투과도는 가시광 영역에서는 80% 이상의 값으로 나타났다. Grain의 크기의 변화는 결정성과 표면 거칠기에 크게 영향을 미친다는 것이 확인되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.345-346
• /
• 2008

We have studied an emission spectra of top-emssion organic light-emitting diodes(TEOLED) due to a change of cathode and organic layer thickness. Device structure is Al(100nm)/TPD(xnm)/$Alq_3$(ynm)/LiF(0.5nm)/cathode. And two different types of cathode were used; one is LiF(0.5nm)/Al(25nm) and the other is LiF(0.5nm)/Al(2nm)/Ag(30nm). While a thickness of hole-transport layer of TPD was varied from 35 to 65nm, an emissive layer thickness of $Alq_3$ was varied from 50 to 100nm for two devices. A ratio of those two layer was kept to be about 2:3. Al and Al/Ag double layer cathode devices show that the emission spectra were changed from 490nm to 560nm and from 490nm to 560nm, respectively, when the total organic layer increase. Full width at half maximum was changed from 67nm to 49nm and from 90nm to 35nm as the organic layer thickness increases. All devices show that view angle dependent emission spectra show a blue shift. Blue shift is strong when the organic layer thickness is more than 140nm. Devece with Al/Ag double layer cathode is more vivid.

• 동력기계공학회지
• /
• 제2권3호
• /
• pp.49-54
• /
• 1998

This paper is investigated of hardness and adhesiveness of plasma sprayed coating steels by AE(Acoustic Emission) testing when loading a tensile. AE Parameters used are Event, Count, Energy and Amplitude. Test specimens are carbon steel(S45C) with sprayed coating layers of Ni-4.5wt.%Al(bond coating) and $TiO_2$(top coating), and carry out heat treatment at $800^{\circ}C\;and\;1000^{\circ}C$, respectively. The micro-hardness of the heat treatment specimen have been improved more than that of non-heat treatment. On the tensile test, the process and occurence of the exfoliation of the sprayed coating layer can be estimated by AE Characteristics of AE parameters, such as event, count, amplitude and energy, on the layer exfoliation are shown the similar aspects. The exfoliation of bond coating occure at about 20% of strain and top coating is about 5% of strain.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.68-68
• /
• 2010

Electroluminescence (EL) characteristics of green-emission ZnS:Cu,Cl-based ac-type inorganic powder electroluminescent structures were examined by inserting carbon nanotubes (CNTs) into or next to the dielectric layer. For the top-emission type EL structure, where the luminescent light was emitted from the top of the structure, was fabricated by assembling in order, a top electrode, an emitting layer, a dielectric layer, and a bottom electrode from the top. $BaTiO_3$ powder mixed with CNTs was used as a dielectric layer or CNTs were deposited between the bottom electrode and $BaTiO_3$ dielectric layer in order to improve the role of the dielectric layer in the structure. Luminance of an EL structure with CNTs inclusion was greatly enhanced possibly due to the high dielectric constant in the dielectric layer of $BaTiO_3$/CNTs, which is one of hot research topics utilizing nano-objects for intensifying dielectric constant and reducing dielectric loss at the same time. A variation on the CNTs themselves and their inclusion methods in the dielectric layer has been exhorted, and the underlying mechanism for the role of CNTs in the EL structure will be explained in the poster. In order to extend the flexibility of EL devices, EL devices were fabricated on the paper substrate and their performance was compared other EL devices on the plastic-based substrate.

• 항공우주기술
• /
• 제6권1호
• /
• pp.29-34
• /
• 2007

On the stage of combustor development process, many aerodynamic and combustion characteristics are found out not by only ideal design concept but by only useful tests which are top confidentiality of technically advanced engine development companies, RR and GE, etc. In this study, test techniques of one of that company are analysed and described about some unique tests for test low emission combustors.

• E2M - 전기 전자와 첨단 소재
• /
• 제19권9호
• /
• pp.33-37
• /
• 2006

• 대한교통학회지
• /
• 제29권5호
• /
• pp.55-65
• /
• 2011

본 연구는 교통부문의 지속가능성 평가를 위한 온실가스 배출량 산정 방법론 별 비교분석을 목적으로 하였다. 배출량 산정 방법론은 UN IPCC에서 제시하였으며 유류판매량을 기본으로 한 하향식 방식(Tier1,2)과 이동원의 속도 및 교통량 자료를 활용한 상향식 방식(Tier 3)이 있다. 방법론에 따른 결과 분석을 위하여 분석 대상지역을 선정하였다. 선정기준은 한국교통연구원에서 수행한 지자체별 지속가능교통 평가결과에 근거하여 지속가능성 1등급 지역 중 하나인 과천시와 7등급 지역인 안성시를 대상으로 분석하였다. Tier 1 방법론을 통해 도출된 온실가스 배출량($CO_2$ 기준)은과천시의 경우 74,813ton/yr, 안성시는 584,125ton/yr로 나타났다. Tier 3 방법론 적용 결과 과천시 91,462ton/yr, 안성시 163,801ton/yr로 나타나 과천시의 경우 Tier 1 방법론보다 22.3% 과대추정 되는 결과가 도출되었다. 반면, 안성시의 경우 Tier 3 방법론을 적용하였을 때 온실가스 배출량이 3.5배가량 줄어드는 결과가 도출되었다. 따라서 본 연구를 통해 온실가스 배출량 산정 방법론에 따라 지속가능교통 지수에 의한 지자체별 등급이 다르게 평가될 수 있다는 것을 확인할 수 있었다.