• 한국환경과학회지
• /
• 제27권6호
• /
• pp.359-369
• /
• 2018

A model has been developed to predict natural ventilation in a single zone building with large openings. This study first presents pressure-based equations on natural ventilation, that include the combined effect of wind and thermal buoyancy. Moreover, the concept of neutral pressure level(NPL) is introduced to consider the two-way flow through a large opening. The total pressure differences across the opening and the NPL are calculated, and nonlinear equations are solved to find the zonal pressure to satisfy mass conservation. For this analysis, an iterative technique of successively approximating the zonal pressure is used. The results of applying this study model to several simple cases are as follows. When there is no wind and only the stack effect is caused, a one-way flow occurs in both the top and bottom openings in the case of two openings of equal-area, and a one-way flow occurs in the top opening; however, a two-way flow occurs in the bottom opening in the case of two openings of unequal-area. When there is a wind effect, regardless of whether the outside air temperature is lower or higher than the indoor air temperature, air flows into the room through the bottom opening and out of the room through the top opening. As the wind velocity increases, the wind effect appears to be more influential than the stack effect owing to the temperature difference.

• 복식문화연구
• /
• 제30권2호
• /
• pp.226-242
• /
• 2022

For clothing items that combine the top with the bottom, such as a jumper suit, it is necessary to design original forms to develop clothes in various styles that can satisfy aesthetic and functional needs. Therefore, to determine the original forms of women's jumper suits, this study aimed to analyze the patterns of women's jumper suits being sold in the market comparatively and evaluate their fitness. For the study method, this researcher obtained five types of women's jumper suits from local brands and compared the patterns' measured sizes, then conducted exterior evaluation on the surplus according to five different movements and analyzed the values of distortion of clothing pressure comparatively. According to the results, in the basic posture, brands A and C received favorable results, while in the other movements, brand B, which had the biggest surplus on the bottom, was evaluated favorably. In conclusion, in the patterns of women's jumper suits, a bigger surplus is added to either the crotch length or crotch girth rather than the top length, and the top and the bottom tend to have a different surplus according to the design. In addition, based on the values of body surface lengths according to the range of movements, this study suggests that an additional surplus be added to the length.

• 에너지공학
• /
• 제24권2호
• /
• pp.154-166
• /
• 2015

The in-core instrumentation measures core power distribution and coolant temperature in local regions of the core in pressurized water reactors. The installation types are distinguished by the designs of routing paths that exit either through reactor bottom mounted instrument nozzles or through reactor top mounted instrument nozzles. Although each type has unique advantages, it is generally known that top mounted design is more competitive with respect to emphasizing nuclear safety issues and ability to cope with severe accidents. The international nuclear vendors have provided various types of reactors with top mounted design. Nuclear power reactors in Korea, however, only have been designed to be applicable to the use of bottom mounted design, and it has been pointed out that the capabilities of Korean reactors against severe accidents should be further enhanced. The paper deals with technical issues on reactor internal and external design, in-core instrumentation, support assembly, sealing mechanism with nozzles, handling, and analytical issues in order to establish the ways of development.

• 산업기술연구
• /
• 제25권B호
• /
• pp.127-133
• /
• 2005

Manufacturing methods of Nano particles can be distinguished by top-down technology as physical method and bottom-up technology as chemical synthetic method. Top-down technology is a kind of method for making microstructure as like carving after forming a macroscopic structure in advance and its typical methods are ball milling, gas condensation method and so on. Nano Particles synthesized by bottom-up method have got to do dispersing process for using them as actual nano particles because their viscosity are very strong and so easy to shape cohesive substances. Therefore, this study is about a particle separating device which separates a certain constant size of grains processed already in mill and mixer because we mostly use media agitating mill as a device of milling and dispersing and we necessarily use very slight balls as media for manufacturing nano particles in the machine. The centrifugal device has been designed for passing and separating below a certain type of grain size after final process of particles in the mill.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.52-54
• /
• 2008

The authors investigated the InGaN/GaN multi-quantum well blue light emitting diodes with the implements of the photonic crystals fabricated at the top surface of p-GaN layer or the bottom interface of n-GaN layer. The top photonic crystals result in the lattice-dependent photoluminescence spectra for the blue light emitting diodes, which have a wavelength of 450nm. However, the bottom photonic crystal shows a big shift of the photoluminescence peak from 444 nm to 504 nm and played as a role of quality enhancement for the crystal growth of GaN thin film. The micro-Raman spectroscopy shows the improved epitaxial quality of GaN thin film.

• 한국연초학회지
• /
• 제14권1호
• /
• pp.42-47
• /
• 1992

This study was conducted to determine the effects of the bottom watering method on seedling growth, temperature of seedbed and working hours. The results of compared conventional watering with bottom watering were as follows: 1. The lowest and highest temperature on surface of bottom watering seedbed were higher about 2-3$^{\circ}C$ and 3-5$^{\circ}C$ than those of conventional plot, respectively. 2. At 30 days after seeding, flesh and dry weight of seedling in bottom watering seedbed were heavier about 121% and 62% than those of seedling in conventional plot, respectively, while dry ratio of that was lower about 30.2%. 3. Plant height of transplanting seedling in bottom watering seedbed was higher about 4-5cm than that of seedling in conventional plot. Otherwise, ratio of top to root and length of root were not significant. 4. Working hours of bottom watering for growing seedling were reduced 40.9% and 53.4% in primary and secondary seedbeds as compared with those of conventional plot, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2536-2539
• /
• 2008

A study has been made on how to occur inertial oscillations in a rotating flow. The flow is considered to be induced by differentially-rotating top and bottom disks with infinite radius. The top and bottom disks are assumed to be set in motion over a finite initial start-up time duration from initial solid body rotation ($\Omega$) to each finial state, i.e., the top disk is rotating at the angular velocity (${\Omega}+{\Delta}{\Omega}$) and the bottom disk (${\Omega}-{\Delta}{\Omega}$). The system Reynolds number, which is a reciprocal of conventional Ekman number in rotating flows, is very high so that a boundary layer flow near disks is pronounced. From a strict theoretical analysis, it is clearly found the fact that inertial oscillation in a rotating flow is caused by excessive input of torque during start-up phase. Above finding comes from the following physics of theoretical result: in the case of abrupt start-up within very shorter time-duration than spin-up time scale, the inertial oscillation is magnified but it could be completely depressed in the case of mildly accelerated start-up, i.e., start-up process being established over diffusion time scale.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.481-482
• /
• 2022

본 논문은 MOSFET 트랜지스터로 구성된 monolithic 3D 인버터의 구조에서 하부 MOSFET 게이트 전압의 변화에 따라서 상부 MOSFET 트랜지스터의 random dopant fluctuation(RDF) 영향을 3차원 소자 시뮬레이션을 통하여 조사하였다. RDF 영향 조사를 위한 표본화는 kinetic monte carlo 방식을 통하여 진행하였으며, RDF 영향이 트랜지스터의 임계전압 변동에 영향을 주는 것을 확인하였고, 상부 트랜지스터와 하부 트랜지스터 사이에 전기적 커플링을 조사하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1428-1431
• /
• 1997

This paper presents an efficient fault diagnosis methodology for lare chemical processes. The methodology is based on a two-tier strategy, When a falt occurs in a process, a top tier identifies the sector (process part or unit) that may contain the fault(s). Afterwards, a bottom tier or lower level evaluates the suspicious sector. The process modeling methodology based on functionality-behavior relations of process units, is proposed and utilized in the top-tier. This methodology models a target process as sequences of functions and variables and their relations. In the bottom tier, each sector has a dedicated diagostic module, which is tailored to the available information or models of the sector. For the sectors selected in the top-tier diagnosis, each diagnostic module is executed to identify the actual faults within the sector. Teh utility of the methodology is illustrated in the diagnosis of the CSTR with heat exchanger.

• 한국태양에너지학회 논문집
• /
• 제29권3호
• /
• pp.59-65
• /
• 2009

In this paper, to find effective way of the production of the distilled water with solar radiation, 4 different boxes of condensation systems were compared. The bottom size of boxes are identical but the angles of top collecting plates are different. During the solar radiation, condensation did not occur and the condensation start when solar radiation was decreased. The maximum condensation reached when the temperatures of the top and bottom parts are equal. The condensation was continued until sunrise with gradually reduced amount. When top plate angle was $45^{\circ}$, condensation was highest compared with the other angles.