• 대한소아치과학회지
• /
• 제24권3호
• /
• pp.710-717
• /
• 1997

Autotransplantation is the transplantation of embeded, impacted, or unerupted tooth, into extraction socket or surgically prepared socket in the same individual. Clinically, successful autotransplantation must show radiolucent space(periodontal ligament space) between transplanted tooth and supporting bone, lamina dura, no root resorption, no ankylosis, no inflammatory change, and physiologic tooth mobility. It is important that procedure is atraumatic, and the instruments should not contact the root surface during procedure. We performed autotransplantation of impacted mandibular canine that transversely located beneath the apices of the mandibular incisors with uncompletely developed apex. In radiographs and clinical evaluation, this transplant showed successful clinical finding except irregularity of mesial root surface after 14 months. It is conclued that transplantation of canine with $\frac{1}{2}{\sim}\frac{3}{4}$ root development provides a good chance of pulp survival, limited risk of root resorption and ensures sufficient final length, and is thus recommended.

• 대한치과교정학회지
• /
• 제51권6호
• /
• pp.366-374
• /
• 2021

Objective: This study investigated the impact of a single piezocision in the maxillary alveolar process on the speed of tooth movement. The null hypothesis was that the speed of tooth movement will be equal with and without piezocision. Methods: All maxillary molars on one side were moved against the combined incisors in 10 ten-week-old male Wistar rats. Under general anesthesia, a force of 25 cN was applied on either side using a Sentalloy closed coil spring. After placing the orthodontic appliance, vertical corticision was performed using a piezotome under local anesthesia, 2 mm mesial from the mesial root of the first molar on a randomly selected side; the other side served as the control. At the beginning of the treatment, and 2 and 4 weeks later, skull micro-computed tomography was performed. After image reconstruction, the distance between the mesial root of the first molar and the incisive canal, and the length of the mesial root of the first maxillary molar were measured. Moreover, the root resorption score was determined as described by Lu et al. Results: Significantly higher speed of tooth movement was observed on the corticision side; thus, the null hypothesis was rejected. The loss of root length and root resorption score were significantly more pronounced after piezocision than before. A strong correlation was observed between the speed of tooth movement and root resorption on the surgical side, but the control side only showed a weak correlation. Conclusions: Piezocision accelerates orthodontic tooth movement and causes increased root resorption.

• 대한치과의사협회지
• /
• 제14권5호
• /
• pp.457-459
• /
• 1976

The author experienced a failed ase of root resection which qas performed on the abnormal upper right lateral incisor. The patient was 16year old female. Clinically the effected tooth had neither a carious cavity nor periondontal diseases, ut, a fistula was present on the gum tissue near the root apex. The roentogenogram revealed a pathological area around the apex of the tooth. The results of failed apicoectomy lead to following conclusions. 1. The operated tooth was a case of dense invaginatus which had two pulp cavities and two canals seperated along their entire length. 2. It was the main cause of failure that the second pulp cavity and root canal were not obturated.

• 대한치과교정학회지
• /
• 제41권3호
• /
• pp.174-183
• /
• 2011

치근 흡수는 백악질과 상아질의 부분적인 상실로 특징되어지는 상황이며, 치근의 길이 감소를 야기하고 치아의 기능에 심각한 영향을 줄 수 있다. 일반적인 병리적인 치근 흡수와 구별하여 교정치료와 관계된 치근 흡수를 orthodontically induced root resorption (OIRR)이라고 부른다. 이번 연구의 목적은 한국인을 대상으로 하여 교정 치료 후에 나타나는 치근 흡수와 관련된 환자 요인과 교정치료 요인을 찾고, 그 양상에 대해 알아보는 것이다. 판별될 요소들은 발치 치료 여부, 성별, 나이, 치근첨의 변위량과 방향, 총 치료 기간, 치아 길이, 치근의 형태였다. 이번 연구는 단국대학교 치과대학병원 교정과에서 2007년 11월부터 2008년 12월 사이에 포괄적인 교정치료가 종결된 환자의 상악 중절치를 대상으로 하였다. 선정된 대상자 수는 137명이었다. 각각의 기록은 치근단 사진과 측모 두부 방사선사진으로 구성되어졌다. 전체 대상치아에 대한 평균 치근 흡수량은 1.63 mm였으며 표준편차는 1.58 mm였다. 이변량적인 비교에서 발치 치료군에서는 $2.10{\pm}1.64mm$, 비발치 치료군에서는 $1.18{\pm}1.39mm$로 나타났다. 발치 치료 군에서 흡수량이 0.92 mm 컸으며, 통계적으로 유의한 차이를 나타냈다. 초기 치아의 길이가 길수록 흡수량이 컸으며, 4 mm 이상의 심한 치근 흡수를 보이는 그룹에서 blunt, pointed, eroded 형태의 비정상적인 치근 형태의 비율이 높았다. OIRR에 영향을 줄 수 있는 요소로 발치 여부, 초기 치아의 길이, 치근의 형태가 있었다.

• 대한치과보철학회지
• /
• 제33권2호
• /
• pp.177-197
• /
• 1995

The endodontically treated tooth is generally restored with post & core, owing to the brittleness and the loss of large amount of tooth structure. Although there have been lots of studies about the endodontically treated teeth, the three-dimensional quantitative studies about the strees distribution of them are in rare cases. In this study, it was assumed that the coronal portion of the upper incisou had severely damaged. After the root canal therapy it was post cored, and restored with PFM crown, for this experiment nine types of model were constructed : 1); long, 2); medium, 3); short gold post for the roots supported with a narmal alveolar bone, 4); long, 5); medium, 6); short gold post for the roots supported with an alveolar bone resorbed to its 1/3 of root length, 7); long, 8); medium, 9); short base metal post for the roots supported with an alveolar bone resorbed to its 1/3 of root length. Force was applied from two directions. One was functional maximum bite force(300N) applied to the spot just lingual to the incisal edge with the angle of 45 degrees to the long axis of the tooth, and the other one was horizontal force(300N) applied to the labial surface. The results analyzed with three-dimensional finite element method were as follows : 1. Stress was concentrated on the middle portion of the labial side dentin of the root and the lingual portion of the apical dentin of the root. Stress in the post showed maximum value at 2 mm above the post apex. 2. In case of the long post and base metal post, strees was concentrated on the apex of the root and the post. 3. In case of the longer post, the displacement on the post-cement interface was lessened. The gold post was more displaceable than the base metal post. 4. In case of the alveolar bone resorption, stress concentrated on the root and the post and displacement on the post-cement interface were increased.

• 치과방사선
• /
• 제24권1호
• /
• pp.129-135
• /
• 1994

This study was performed to evaluate the accuracy of orthopantomogram by measuring the actual and radiographic tooth length and by analyzing the vertical magnification rate. For this study, total 90 teeth of the maxilla and mandible teeth and a dry skull were used. This experiment was attached with metal balls of 1±0.02㎜ at the root and the crown cusp tips of central, 2nd premolar, 1st molar of the maxilla and mandible and the teeth were embedded in dry skull, and then orthopantomogram was taken. The obtained results were as follows: 1. The average of tooth length in orthopantomogram was longer than that of actual tooth length. 2. The average of vertical magnification rate in the orthopantomogram to actual tooth length was 17-26%. 3. Vertical magnification rate of the maxilla teeth was 18-26% and that of mandibular teeth was 17-23%, and the magnification of maxillary teeth was larger than that of mandible teeth(P<0.0l). 4. Vertical magnification rate of posterior area was 22-26% and that of anterior area was 17-18%, and the magnification of anterior area was less than that of posterior area(P<0.01).

• 대한치과의사협회지
• /
• 제54권8호
• /
• pp.658-665
• /
• 2016

Treatment of immature permanent teeth with irreversibly damaged pulp has been challenging in dental practice because of the lack of apical constriction, thin dentinal walls, and short roots. This may lead to the extrusion of filling materials, and fracture of the root due to its more fragile feature during shaping of the root canal. Apexification with calcium hydroxide or MTA is one of the treatment options for these cases. Although favorable results of apexification have been reported, these treatment procedures do not guarantee the increase of root length and/or width even after a long term period. Thus, treated teeth are still prone to fractures. Recently, pulp revascularization has been proposed as an alternative treatment for immature teeth with necrotic pulp and periapical pathosis. Pulp revascularization allows the stimulation of the apical development and the root maturation. There have been many treatment protocols using various materials such as antibiotics and calcium hydroxide medicament. In this case report, literature review about pulp revascularization and two related cases are presented.

• 대한소아치과학회지
• /
• 제27권3호
• /
• pp.383-387
• /
• 2000

융합(fusion)은 발육하고 있는 두 개의 독립된 치아가 상아질이나 법랑질부위에서의 결합으로 정의되며 보통 분리된 치근관과 단일의 큰 치관을 특징으로 하며 쌍생(gemination)은 단일치배내에서 조직의 함입으로 두 개의 치아로의 불완전한 형성을 이루는 발육상태로 정의되며 일반적으로 단일치근관과 큰 치관의 특징을 보인다. 융합이 정상치열의 두 개 치아사이에서 발생되었다면 치아수가 부족하게 되며 과잉치와 정상치아 사이에서 발생되었다면 정상치아수를 보일 것이며 이것은 방생과의 감별진단을 어렵게 한다. Brook과 Winter는 이러한 혼돈을 피하기 위해 'Double tooth' 라는 단어를 사용하였다. 일반적으로 증세는 없으나 임상적으로는 심미적인 문제와, 우식의 호발 치주적 문제, 치열의 문제를 보일 수 없다. 치료는 유치의 경우 일반적으로 치료가 불필요하며 영구치의 경우 심미적인 문제등으로 환자나 보호자에 의해 치료가 요구되어지기도 한다. 본 증례는 하악 영구측절치의 Double tooth로 내원한 8세된 여아로서 편측절단술(hemisection)과 치근단형성술을 시행후 비교적 양호한 결과를 얻었기에 이에 대해 보고하는 바이다.

• 대한치과교정학회지
• /
• 제46권3호
• /
• pp.155-162
• /
• 2016

Objective: The aim of this study was to investigate whether labial tooth inclination and alveolar bone loss affect the moment per unit of force ($M_t/F$) in controlled tipping and consequent stresses on the periodontal ligament (PDL). Methods: Three-dimensional models (n = 20) of maxillary central incisors were created with different labial inclinations ($5^{\circ}$, $10^{\circ}$, $15^{\circ}$, and $20^{\circ}$) and different amounts of alveolar bone loss (0, 2, 4, and 6 mm). The $M_t/F$ necessary for controlled tipping ($M_t/F_{cont}$) and the principal stresses on the PDL were calculated for each model separately in a finite element analysis. Results: As labial inclination increased, $M_t/F_{cont}$ and the length of the moment arm decreased. In contrast, increased alveolar bone loss caused increases in $M_t/F_{cont}$ and the length of the moment arm. When $M_t/F$ was near $M_t/F_{cont}$, increases in Mt/F caused compressive stresses to move from a predominantly labial apical region to a palatal apical position, and tensile stresses in the labial area moved from a cervical position to a mid-root position. Although controlled tipping was applied to the incisors, increases in alveolar bone loss and labial tooth inclination caused increases in maximum compressive and tensile stresses at the root apices. Conclusions: Increases in alveolar bone loss and labial tooth inclination caused increases in stresses that might cause root resorption at the root apex, despite the application of controlled tipping to the incisors.

• Restorative Dentistry and Endodontics
• /
• 제44권4호
• /
• pp.39.1-39.8
• /
• 2019

The present report presents a case of dens invaginatus (DI) in a patient with 4 maxillary incisors. A 24-year-old female complained of swelling of the maxillary left anterior region and discoloration of the maxillary left anterior tooth. The maxillary left lateral incisor (tooth #22) showed pulp necrosis and a chronic apical abscess, and a periapical X-ray demonstrated DI on bilateral maxillary central and lateral incisors. All teeth responded to a vitality test, except tooth #22. The anatomic form of tooth #22 was similar to that of tooth #12, and both teeth had lingual pits. In addition, panoramic and periapical X-rays demonstrated root canal calcification, such as pulp stones, in the maxillary canines, first and second premolars, and the mandibular incisors, canines, and first premolars bilaterally. The patient underwent root canal treatment of tooth #22 and non-vital tooth bleaching. After a temporary filling material was removed, the invaginated mass was removed using ultrasonic tips under an operating microscope. The working length was established, and the root canal was enlarged up to #50 apical size and obturated with gutta-percha and AH 26 sealer using the continuous wave of condensation technique. Finally, non-vital bleaching was performed, and the access cavity was filled with composite resin.