• Restorative Dentistry and Endodontics
• /
• v.49 no.3
• /
• pp.25.1-25.9
• /
• 2024

Objectives: This study aimed to evaluate the color stability and solubility of Biodentine and NeoPutty in contact with different irrigation solutions. Materials and Methods: Biodentine and NeoPutty were set in cylindrical molds with 7 mm diameter and 1.5 mm high and immersed in distilled water, 17% ethylenediaminetetraacetic acid (EDTA), 2% chlorhexidine (CHX), 9% 1-hydroxyethylidene 1,1-diphosphonate (HEDP), and 5% sodium hypochlorite (NaOCl) solutions for 24 hours. The color change was measured with a spectrophotometer. The solubility values were calculated as the mass loss was expressed as a percentage of the original mass using an analytical balance with 10^-4 g accuracy. Data were analyzed with Kruskal-Wallis followed by Mann-Whitney U tests, and 2-way analysis of variance test followed by Bonferroni corrections for pairwise comparisons for solubility and color stability with a 5% significance threshold, respectively. Results: Biodentine exhibited higher color changes compared to the NeoPutty contact with all solutions except distilled water (p < 0.05). Both hydraulic cements (HCs) showed higher discoloration values immersion in CHX followed by NaOCl. No statistically significant difference was found between Biodentine and NeoPutty regardless of irrigation solution in terms of solubility (p > 0.05). Solubility values were lower in the distilled water group compared to EDTA and CHX (p < 0.05). Conclusions: Tested HCs showed solubility and color changes at various rates. NeoPutty could be an appropriate material in aesthetic areas. The usage of HEDP as an irrigant solution can be considered suitable for various endodontic treatments due to its relatively lower solubility and discoloration values.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.654-660
• /
• 2001

Dentinogenesis imperfecta is an example of an inheritable dentinal defect originating during the histodifferentiation stage of tooth development, with involvement of the primary and permanent teeth. Shields, Bixler and El-Kafrawy proposed three types of Dentinogenesis imperfecta : Type I, II, III. Witkop reported a prevalence of 1 in 8000 with the trait, and no significant difference between male and female. Affected teeth have red-brown discoloration often with distinctive wearness of occlusal surface of posterior teeth and incisal surface of anterior teeth. Once enamel seperated from underlying defective dentin, the dentin demonstrates significantly acclerated attrision. Radiographically, the teeth have thin roots, bulbous crown, cervical constriction, and obliteration of the root canals and pulp chambers. In primary dentition periapical lesions or multiple root fractures are often observed. In successive generations the phenotypes of discoloration and wearness of teeth occurred, and one of the patient's subships, 10 year-old sister, showed general discoloration of her teeth and mild wearness. In this case, a 4 year-old male reported to the Yonsei University Pedodontics clinic, with a chief complaint of discolored teeth. The teeth showed generally yellowish-brown discoloration and moderate wearness. In radiographic features, obliteration of pulp, bulbous crown, and short roots were observed. It was diagnosed as Dentinogenesis imperfecta. The posterior teeth were restored with Stainless Steel Crown, and defective incisors including left upper primary central incisor which was extracted due to a root fracture with Open-faced Stainless Steel crown.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.191-196
• /
• 2013

The purpose of this study was to evaluate the tooth brightening of whitening dentifrice and to determine the tooth stain level over 20 days depending on beverages that have various pH values after using whitening dentifrice. Thirty teeth were randomly divided into two groups. Group 1 was provided with a whitening dentifrice for 3 minutes and group 2 was treated with a control dentifrice for 3 minutes thrice a day for four weeks. All teeth were photographed using a digital imaging system under a stereomicroscope (magnification, ${\times}10$). After four weeks, the ten teeth were immersed in the tea solution, another of ten teeth were immersed in the orange juice and the other of the teeth were immersed in the coffee solution. Three solutions were renewed each day for the appropriate groups. Stain development was monitored under a stereomicroscope daily over 20 days period by immersion of teeth in a tea, juice, coffee solution at room temperature ($25^{\circ}C$) in individual container. Whitening dentifrice gave a statistically higher value of overall color change as compared to control dentifrice after 21 days (p<0.05). Stain level of whiten tooth immersed in orange juice was the grestest overall color change, but there was not statistically significant difference (p>0.05). On the other hand, stain level of whiten tooth immersed in coffee and green tea showed a statistically significant difference after 15 days and 5 days, respectively (p<0.05). Tooth immersed in green tea was higher negative value than control dentifrice. The tooth using whitening dentifrice was shown to be effectively whiter color than control dentifrice. However, stain level by orange juice, coffee and green tea has a strong staining effect.

• Restorative Dentistry and Endodontics
• /
• v.27 no.1
• /
• pp.16-23
• /
• 2002

Physical properties of composite resins such as strength, resistance to wear, discoloration, etc depend on the degree of conversion of the resin components. The purpose of this study was to evaluate the degree of conversion of the composite resins according to the thickness of tooth structure penetrated by light and applied light curing time. The coronal portions of extracted human teeth (one anterior tooth, three posterior tooth) was embedded by pink denture material. the mounted teeth were cut into three illumination sections (1mm thickness enamel section, 1mm thickness dentin section, 2mm thicknes dentin section) and one backing section with cutting wheel. Thin resin films were made by using 6kg pressure between slide glass during 5 minutes Thin resin film was light cured on coupled illumination section during 40sec, 80sec and 120sec. each illumination section was coupled as follows; no tooth structure(X), ename section(E), enamel section + 1mm dentin section(ED1), enamel section + 2mm dentin section(ED2), enamel section + 1mm dentin section + 2mm dentin section(EDD). To simulate the clinical situation more closely, thin resin films was cured against a backing section of tooth structure. The degree of conversion of carbon double bonds to single bonds in the resin films were examined by means of Fourier Transform Infrared Spectrometer. The results were obtained as follows ; 1 As curing time was increased, conversion rate was increased and as tooth thickness which was penetrated by curing light was increased, conversion rate was decreased. 2. At all tooth thickness groups, conversion rate between 80sec and 120sec was not significantly increased(P＞0.05). 3. At 40sec group and 80sec, conversion rate between no tooth structure(X) group and 1mm enamel section(E) group was not significantly decreased(P＞0.05). 4. At 80sec group and 120sec, conversion rate between 1mm enamel section(E) group and 1mm enamel section + 1mm dentin section(ED1) group was not significantly decreased(P＞0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.329-334
• /
• 2007

The infection of primary teeth occurs by caries or trauma. But, if it is not treated on time, the complication may occur such as enamel hypoplasia, discoloration, impaction, displacement and dilaceration of permanent successors. The periapical lesion on primary tooth could displace the permanent successors in any direction. Treatment options of displaced tooth are observation after extracting the primary teeth, surgical exposure orthodontic traction, transplantation and extraction. In these cases, displacement of permanent central incisor caused by the periapical lesion of primary teeth was observed. The spontaneous eruption after extraction of primary teeth was expected considering degree of displacement, development of root and direction of eruption. This case report shows spontaneous eruption of displaced permanent tooth germ was achieved with periodic examination after extraction of primary teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.3
• /
• pp.216-222
• /
• 2013

Paradigm shift in management of infected immature permanent teeth has occurred. The new concept of the treatment includes minimal or no intracanal instrumentation, disinfection with triple antibiotic paste and sealing with mineral trioxide aggregate. This regenerative endodontic treatment promotes differentiation of periradicular stem cells that induce regeneration of vital tissue and continuation of root formation. Thorough disinfection and three-dimensional scaffold are important in this new concept of the treatment. Platelet-rich fibrin has been reported as 'new scaffold' instead of blood clot, which had been used in the past. Triple antibiotics can be used to disinfect the tooth but may lead to complications including discoloration. Three cases of infected immature permanent tooth caused by dens evaginatus fracture are presented. After removal of necrotic pulp and thorough intracanal irrigation, only platelet-rich fibrin was applied to the root canal in the first case. In the other cases, topical antibiotics was used for disinfection and platelet-rich fibrin for scaffold. In all the cases, the opening was sealed with mineral trioxide aggregate. All the cases showed proper healing of inrabony lesion and some lengthening of root. According to these cases, regenerating vital tissue of the infected immature permanent tooth can be achieved with disinfection and application of platelet-rich fibrin.

• The Journal of the Korean dental association
• /
• v.51 no.8
• /
• pp.442-450
• /
• 2013

It is well known that the majority of dental injuries occur in children and adolescent. An injury to the teeth can have serious and long-term consequences, leading to their discoloration, malformation, or possible loss. The emotional impact of such an injury can be far reaching. The majority of dental injuries in the primary and permanent dentitions involve the anterior teeth, especially the maxillary central incisors. Concussion, subluxation, and luxation are the commonest injuries in the primary dentition, while uncomplicated crown fractures are commonest in the permanent dentition. If it is decided to preserve a traumatized primary tooth, it should be carefully observed for clinical and radiographic signs of pulpal or periodontal complications. Radiographs are also examined closely to disclose any damage to the permanent successor. The intervals between reexaminations should be individualized depending on the severity of trauma, the expected type of complications and the age of the patient. Most complications are observed within the first year of the trauma. However, the follow-up evaluation of permanent teeth should continue until treatment of all complications is completed, or until a lost or extracted permanent tooth has been adequately replaced. It is important that the dentist and the other members of the dental team are well prepared to meet the many complex and challenging problems in the care of dental emergencies.

• Restorative Dentistry and Endodontics
• /
• v.49 no.3
• /
• pp.23.1-23.10
• /
• 2024

Objectives: Previous in vitro studies determined the whitening effects of bleaching products on stained resin composite surfaces. This in vitro study aimed to verify the effectiveness of a whitening system on composite resin previously subjected to pigmentation, specifically examining the depth of whitening effectiveness within the material structure. Materials and Methods: A commercially available nano-filled composite resin was used. Specimens were stained using a coffee-based solution and a 10% carbamide peroxide-based gel was employed as the whitening agent. The pigment's penetration and the effect of the bleaching gel were evaluated by measuring color (CieLab values) from the outer edge to the inner part of the specimens. Color measurements were taken at 14 points, starting from 0.1 mm from the external perimeter up to 3.0 mm. Results: Analysis of variance tests showed a statistically significant difference between the Control Group (CG), Pigmentation Group, and Whitening Group. The whitening agent was effective up to 1.5 mm in depth, with Whiteness index (W) values not statistically different from those of CG up to 0.5 mm in depth. Conclusions: Whitening agents on nano-filled resin composite previously pigmented appear effective in restoring the W to values similar to the original, particularly in the superficial layers of the sample.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.133-149
• /
• 1998

Clinical application of composite resin recently draw great concerns in dentistry. Especially due to advantages such as esthetics, adhesiveness, simple clinical procedures, various shapes and kinds of composite resins are widely being applied to prosthodontics, conservative dentistry, and orthodontics. But, clinical problems attributable to the polymerization shrinkage of composite resin have been proposed, and we have to regard clinical problems such as secondary caries, loss of restoration, fracture of the surrounding tooth structure, marginal discoloration, and tooth sensitivity, and many portions are remained to be overcome. Therefore, this study attempts to analyze stress distribution between resin and tooth structure which is generated during polymerization shrinkage of composite resin using three dimensional finite element method. Three dimensional finite element models with conventional box-shape cavity and erosion/abrasion type V-shape lesion cavity in upper central incisor were developed. These cavities were filled with four different types of placement techniques. (bulk filling, horizontal increment filling, oblique occlusal increment filling, oblique gingival increment filling) The stresses generated by polymerization shrinkage of composite resin were calculated. The results analyzed with three dimensional finite element method were as follows : 1. The increment filling technique showed the highest maximum normal stress in both conventional box-shape and V-shape cavities and showed a tendency to decrease after complete polymerization. 2. The bulk filling technique resulted in increased stresses during the curing process in both conventional box-shape and V-shape cavities and the highest maximum normal stress occurred after complete polymerization. 3. The bulk filling resulted in the lowest maximum normal stress in both box-shape and V-shape cavities 4. Regardless of placement method, in conventional box-shape cavity, the maximum normal stress increased in dentin floor, enamel, dentin sequence and in V-shape cavity, the maximum normal stress increased in enamel, dentin sequence.

• The Journal of the Korean dental association
• /
• v.54 no.5
• /
• pp.365-373
• /
• 2016

Purpose: Cemental tear is a specific type of root surface fracture characterized by a complete separation of a cemental fragment along the cementodentinal junction or a partial split within the cementum along an incremental line. It is suggested to be a factor for periodontal or periapical tissue destruction. The aim of this study is to present a diagnosis and treatment of cemental tear associated with periapical lesion with root canal treatment and regenerative periodontal surgery. Treatments: A 60-year-old male who had a history of sports trauma on the mandibular right central incisor about 10 years ago presented with apical cemental tear. Clinical examination showed a slightly dark yellowish discoloration and sinus tract that was located on the apical labial mucosa. The mobility and percussion were also assessed on the diseased tooth and recorded as $Miller^{\circ}{\phi}s$ Class II and tenderness to percussion. The probing depth was within the normal limit (<3 mm). Radiographic examination revealed a radiolucent lesion at the apical area and extended to distal aspect of the tooth along the fragment of cemental tear. After root canal treatment, periapical surgery was performed. The bony defect was exposed and then the detached root fragment was removed. Apical root resection and retrograde filling with Mineral Trioxide Aggregate (MTA) were accomplished and the bony defect was filled with deproteinized bovine bone mineral (DBBM) and covered with biodegradable collagen membrane. Results: After 9-month follow-up, healing of the mandibular right central incisor was uneventful and no swelling, purulence or pain was revealed in the associated area. Probing pocket depth was favorably stable, and the tooth mobility was decreased to the Miller's Class I. Conclusions: Apical cemental tear associated periapical lesion could be successfully treated with removal of the detached cementum in combination with apical surgery and GTR procedure.