• 한국산학기술학회논문지
• /
• 제1권1호
• /
• pp.55-62
• /
• 2000

기업의 공장자동화는 가장 중요한 경쟁력 화보 수단이 되고 있으며 생산자동화에서 품질은 소프트웨어의 기술적 품질에 지대한 영향을 받게 되었다. 따라서, 공장자동화 시스템의 품질 향상을 위해 자동화 소프트웨어에 대한 품질평가의 필요성이 대두되었다. 본 연구에서는 공장자동화용 소프트웨어에 대한 품질평가 체계와 평가 프로세스를 확립하고 평가 과정에서 활용되는 메트릭을 개발하였다. 또한, 이를 바탕으로 품질평가 자동화 도구를 설계·구현함으로써 공장자동화 산업의 핵심이 되고 있는 자동화 소프트웨어의 품질 향상을 지원할 수 있도록 하였다.

• Steel and Composite Structures
• /
• 제21권3호
• /
• pp.573-588
• /
• 2016

Carbon Fiber Reinforced Plastic (CFRP) and Titanium Alloy (Ti6Al4V) stack, extensively used in aerospace structural components are assembled by fasteners and the holes are made using drilling process. Drilling of stack in one shot is a complicated process due to dissimilarity in the material properties. It is vital to have optimal machining condition and tool geometry for better hole quality and tool life. In this study the tool wear and hole quality were analysed by experimental analysis using three modified twist drills and online tool condition monitoring using Acoustics Emission (AE) sensor. Helix angle and point angle influence tool performance and cutting force. It was found that a tool geometry (TG1) with high helix angle of $35^{\circ}$ with low point angle $130^{\circ}$ results in reduction in thrust force of 150-500 N range but the TG2 also perform almost similar to TG1, but when compared with the AErms voltage generated during drilling it was found that progressive rise in voltage in TG1 is less with respect to TG2 which can be attributed to tool life. In process wear monitoring was done using crest factor as monitoring index. AErms voltage were measured and correlated with the performance of the drills.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.867-875
• /
• 2004

In order to inspect burr geometry and hole quality in micro-drilling processes, a cost-effective method using an image processing and shape from focus (SFF) methods on the machine tool is proposed. A CCD camera with a zoom lens and a novel illumination unit is used in this paper. Since the on-machine vision unit is incorporated with the CNC function of the machine tool, direct measurement and condition monitoring of micro-drilling processes are conducted between drilling processes on the machine tool. Stainless steel and hardened tool steel are used as specimens, as well as twist drills made of carbide are used in experiments. Validity of the developed system is confirmed through experiments.

• 한국정밀공학회지
• /
• 제28권1호
• /
• pp.11-18
• /
• 2011

A worm screw is widely used in a geared motor unit for motion conversion from rotation to linear. For mass production of a high quality worm, the current rolling process is substituted with the milling process. Since the milling process enables the integration of all operations of worm manufacturing on a CNC(Computer Numerical Control) lathe, productivity can be remarkably improved. In this study, the tooling system for side milling on a CNC lathe to improve machinability is developed. However, the cutting tool-workpiece interference is important factors to be considered for producing high quality worms. For adaptability of various worms machining, the tool-workpiece interference simulation system based on a tool-tip trajectory model is developed. The developed simulation system is verified through several kinds of worms and experimental results.

• 한국정밀공학회지
• /
• 제26권12호
• /
• pp.47-54
• /
• 2009

A worm screw is widely used in a geared motor unit for motion conversion from rotation to linear. For mass production of a high quality worm, the current rolling process is substituted with the milling process. Since the milling process enables the integration of all operations of worm manufacturing on a CNC(Computer Numerical Control) lathe, productivity can be remarkably improved. In this study, the tooling system for planetary milling on a CNC lathe to improve machinability is developed. However, the cutting tool-workpiece interference is important factors to be considered for producing high quality worms. For adaptability of various worms machining, the tool-workpiece interference simulation system based on a tool-tip trajectory model is developed. The developed simulation system is verified through several kinds of worms and experimental results.

• Nutrition Research and Practice
• /
• 제10권3호
• /
• pp.305-312
• /
• 2016

BACKGROUND/OBJECTIVES: As the prevalence of chronic diseases has risen, the need for straightforward diagnostic tools for monitoring nutrition status to improve nutrition counseling and disease prevention has likewise increased. This study developed an easily usable dietary behavior pattern diagnosis checklist and investigated its correlation with dietary quality index. SUBJECTS/METHODS: A draft dietary pattern evaluation tool was generated by analyzing previous studies. The draft questionnaire comprised 61 questions for assessing dietary habits. A survey was administered to 320 adults (19 to 64 years old) using the dietary pattern evaluation tool and 24-hour-recall method between March and May of 2014 in Jeonbuk province and the metropolitan area. Principal component analysis with varimax rotation was performed to identify dietary behavior patterns. Nutritional analysis was conducted using CAN-Pro 4.0, and the Diet Quality Index-International (DQI-I) was calculated to assess dietary quality. The correlation between dietary pattern scores and DQI-I scores was also analyzed. RESULTS: The factor analysis resulted in a total of 34 questions mapped to four main dietary behavior patterns: "high fat and calorie" pattern (12 questions), "overeating/binge" pattern (nine questions), "dietary impulse" pattern (eight questions), and "unbalanced food intake" pattern (five questions). The four dietary behavior patterns were negatively correlated with DQI-I adequacy and total scores (P < 0.01). CONCLUSIONS: The dietary pattern evaluation tool developed in this study can be used to diagnose a client's dietary behavior problems and is available as a nutrition counseling tool in the field.

• 한국건설관리학회논문집
• /
• 제21권6호
• /
• pp.27-37
• /
• 2020

본 연구에서는 현장 품질관리 업무에서 나타나는 문제들을 해소하기 위해 모바일 BIM기반 품질관리 지원도구를 개발하였다. 본 연구의 도구를 개발하기 위해 국내 품질관리 업무의 절차를 분석하고 존재하는 문제를 해결하기 위해 12개 기능을 도출하여 공종별체크리스트와 BIM모델 객체 매핑과정을 수행하였다. 그리고 도구 유용성 설문조사를 통해 개발된 도구가 품질관리업무에 존재하는 문제를 해결할 수 있다고 확인하였다.

• 산업경영시스템학회지
• /
• 제19권40호
• /
• pp.233-240
• /
• 1996

A fixed amount compensator is proposed for a process with a linear tool wear function. A Cost model is constructed which involve process adjustment cost and quality loss. Symmetric and asymmetric quadratic functions of the deviation of a quality measurement from the nominal target value are considered as the quality loss functions. Methods of finding optimal values of initial setting and compensation limit are presented and a numerical example is given.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.95.5-95
• /
• 2002

Tool condition monitoring is recognized important in CNC machining processes since the excessive wear or breakage of tool has to be noticed immediately in an automated manufacturing system to keep the quality and productivity. In this research, as an economic way of detecting the status of tool change, the wavelet transform has been applied to the measurement of spindle motor current. The energy of a specific level shows the difference between a normal tool and worn one. By setting a limit on the change of energy, it is possible to notify the time to inspect the tool.

• 간호행정학회지
• /
• 제4권2호
• /
• pp.419-437
• /
• 1998

Nurses use a nursing process. that is a scientific approach method. in order to understand the clients' condition and to solve their problems. Professional nurses have accepted the nursing process as a standard framework for nursing activities, and the first step of the nursing process is nursing assessment. The purpose of this study was to develop a nursing assessment tool for emergency patients. Assessment is a first step in the nursing process, and scientific assessment helps to better understand the patients. Thus the development of an assessment tool for emergency patients will improve of nursing quality and advance to efficacy of emergency room(ER) management. The study involved the development of a conceptual framework, preliminary tool, content validity verification process. and reliability verification process. The conceptual framework was developed through a review of the literature. and preliminary tool was developed from the conceptual framework that based on care flow sheet' developed James A. Haley. The preliminary tool was evaluated for validity and reliability by seven experts, one ER nurse manager, two ER head nurses, two emergency medicine doctors. and two ER charge nurses and by ten nurses with one to five year careers in ER nursing. The results of this study was as follows 1. The conceptual framework which was developed was composed of three parts. They were triage criteria, first assessment and secondary assessment. 2. The preliminary tool which was developed had 31 items based on the conceptual framework. 3. To test expert validity a 4-point scale was used. items which had gained 3-4 points from six persons of the seven experts were selected. All 31 items from the preliminary tool were selected. 4. The reliability test was done by ten nurses educated in the use of the assessment tool. Two pairs of nurses simultaneously assessed the same patients. A total agreement percentile was calculated and result was 87.3% agreement. 5. After the validity and reliability testing. the final emergency patient nursing assessment tool was finalized with 31 items. and a check-list for the responses. This study concludes that the tool which was developed is both valid and reliable will advance quality care for emergency patients. This emergency nursing assessment tool was also found to be an adequate tool for assessment of emergency patients.