1 |
Zitoune, R., Krishnaraj, V., Sofiane Almabouacif, B., Collombet, F., Sima, M. and Jolin, A. (2012), "Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich", Composites: Part B, 43(3), 1480-1488.
DOI
|
2 |
Zitoune, R., Krishnaraj, V., Collombet, F. and Le Roux, S. (2016), "Experimental and numerical analysis on drilling of carbon fibre reinforced plastic and aluminium stacks", Compos. Struct., 146, 148-158.
DOI
|
3 |
Arul, S., Vijayaraghavan, L. and Malhotra, S.K. (2007), "Online monitoring of acoustic emission for quality control in drilling of polymeric composites", J. Mater. Process. Technol., 185(1-3), 184-190.
DOI
|
4 |
Aurich, J.C., Dornfeld, D., Arrazola, P.J., Franke, V., Letiz, L. and Min, S. (2009), "Burrs-Analysis, control and removal", CIRP Annals-Manufacturing Technology, 58(2), 519-542.
DOI
|
5 |
Brinksmeier, E. and Janssen, R. (2002), "Drilling of multi-layer composite materials consisting of Carbon Fiber Reinforced Plastics (CFRP)", CIRP Annals-Manuf. Technol., 51(1), 87-90.
DOI
|
6 |
Capone, N. (2011), Drill point for one-shot drilling of sandwich panels and similar, Patent US 8,070,399 B2, USA.
|
7 |
Ezugwu, E.O. and Wang, Z.M. (1997), "Titanium alloys and their machinability - A review", J. Mater. Process. Technol., 68(3), 262-274.
DOI
|
8 |
Hocheng, H., Tsao, C.C., Liu, C.S. and Chen, H.A. (2014), "Reducing drilling-induced delamination in composite tube by magnetic colloid back-up", CIRP Annals-Manuf. Technol., 63(1), 85-88.
DOI
|
9 |
Kim, D. and Ramulu, M. (2004), "Drilling process optimization for graphite/bismaleimide titanium alloy stack", Compos. Struct., 63(1), 101-114.
DOI
|
10 |
Kim, D. and Ramulu, M. (2007), "Study on the drilling of titanium/graphite hybrid composites", J. Mater. Process. Technol., 129(3), 390-397.
DOI
|
11 |
Krishnaraj, V., Prabukarthi, A., Arun Ramanathan, B., Elanghovan, N., Senthil Kumar, M., Redouane, Z. and Davim, J.P. (2012a), "Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates", Composites: Part B, 43(4), 1791-1799.
|
12 |
Marques, A.T., Durao, L.M., Magalhaes, A.G., Silva, J.F. and Tavares, J.M.R.S. (2009), "Delamination analysis of carbon fiber reinforced laminates", Eval. Special Step Drill Compos. Sci. Technol., 69(14), 2376-2382.
|
13 |
Krishnaraj, V., Prabukarthi, A., Santhosh, M. and Senthilkumar, M. (2012b), "Optimization of machining parameters in CFRP/Ti stack drilling", Proceeding of the International Conference on Manufacturing Science and Engineering, Notre Dame, IN, USA, June.
|
14 |
Lazar, M.D. and Xirouchakis, P. (2011), "Experimental analysis of drilling fiber reinforced composites", Int. J. Mach. Tool. Manuf., 51(12), 937-946.
DOI
|
15 |
Li, R., Hegdem, P. and Shih, A.J. (2007), "High-throughput drilling of titanium alloys", Int. J. Mach. Tools Manuf., 47(1), 63-74.
DOI
|
16 |
Moal, G.L. (2012), "Multisensor monitoring of aeronautical drilling/counter sinking operations", Ph.D. Thesis; Paris Institute of Technology, France.
|
17 |
Nurul Amin, A.K.M. (2012), Titanium Alloys-Towards Achieving Enhanced Properties for Diversified Application, In Tech, Croatia, Europe.
|
18 |
Park, K.H., Beal, A., Kim, D., Kwon, P and Lantrip, J. (2011), "Tool wear in drilling of composite/titanium stack using carbide and polycrystalline diamond tools", Wear, 11-12, 2826-2835.
|
19 |
Pecat, O. and Brinksmeier, E. (2014a), "Low damage drilling of CFRP/Titanium compound materials for fastening", Procedia CIRP, 13, 1-7.
DOI
|
20 |
Pecat, O. and Brinksmeier, E. (2014b), "Tool wear analyses in low frequency vibration assisted drilling of CFRP/Ti6Al4V stack material", Procedia CIRP, 14, 142-147.
DOI
|
21 |
Ravishankar, S.R. and Murthy, C.R.L. (2000a), "Application of acoustic emission in drilling of composite laminates", NDT&E International, 33(6), 429-435.
DOI
|
22 |
Poutord, A., Rossi, F., Poulachon, G., Sauobi, R.M. and Abrivard, G. (2013), "Local approach of wear in drilling Ti6Al4V/CFRP for stack modelling", Procedia CIRP, 8, 316-321.
DOI
|
23 |
Prabukarthi, A., Krishnaraj, V., Senthilkumar, M., Arun Ramanathan, B., Elangovan, N. and Redouane, Z. (2011), "High Speed Drilling of CFRP-Ti Stack", J. Modern Manuf. Technol., 3(1), 167-181.
|
24 |
Prabukarthi, A., Krishnaraj, V. and Senthilkumar, M. (2013), "Multi-objective optimization on drilling of titanium alloy(Ti6Al4V)", Materials Science Forum, 763, 29-49.
DOI
|
25 |
Ravishankar, S.R. and Murthy, C.R.L. (2000b), "Characteristics of AE signals obtained during drilling composite laminates", NDT&E International, 33(5), 341-348.
DOI
|
26 |
Sampath, K. and Ni, W.Y. (2008), Drill for machining fiber reinforced composite material, Patent 2008/0019787 A1, USA.
|
27 |
Satoshi, E.M.A. (2012), "Effects of twist drill point geometry on torque and thrust", Sci. Rep. Fac. Educ. Gifu Univ. (Nat. Sci.), 36, 165-174.
|
28 |
SenthilKumar, M., Prabukarthi, A. and Krishnaraj, V. (2013), "Study on tool wear and chip formation during drilling Carbon Fiber Reinforced Polymer (CFRP)/Titanium Alloy(Ti6Al4V) stack", Procedia Eng., 64, 582-592.
DOI
|
29 |
Sharif, S., Rahim, E.A. and Sasahara, H. (2012), "Machinability of titanium alloys in drilling", In tech Europe: In Tech, pp. 117-137.
|
30 |
Shyha, I.S., Soo, S.L., Aspinwall, D.K., Bradely, S., Perry, R., Harden, P. and Dawson, P. (2011), "Hole quality assessment following drilling of metallic-composite stack", Int. J. Mach. Tool. Manuf., 51(7-8), 569-578.
DOI
|
31 |
Tsao, C.C., Kuo, K.L. and Hsu, I.C. (2012), "Evaluation of a novel approach to a delemaniation factor after drilling composite laminates using core-saw drill", Int. J. Adv. Manuf. Technol., 59(5), 617-622.
DOI
|
32 |
Velayudham, A. and Krishnamurthy, R. (2007), "Effect of point geometry and their influence on thrust and delamination in drilling of polymeric composite", J. Mater. Process. Technol., 185(1-3), 204-209.
DOI
|
33 |
Velayutham, A., Krishnamurthy, R. and Soundarapandian, T. (2005), "Acoustic emission based drill condition monitoring during drilling of glass, phenolic polymeric composite using wavelet packet transform", Mater. Sci. Eng., 412(1-2), 141-145.
DOI
|
34 |
Wang, X., Kwon, P. Y., Sturtevant, C., Kim, D. and Lantrip, J. (2013), "Tool wear of coated drills in drilling CFRP", J. Manuf. Process., 15(1), 127-135.
DOI
|
35 |
Wang, X., Kwon, P.Y., Sturtevant, C., Kim, D. and Lantrip, J. (2014), "Comparative tool wear study based on drilling experiments on CFRP/Ti stack and its individual layers", Wear, 317(1-2), 265-276.
DOI
|
36 |
Wu, Y.A. and Du, R. (1996), "Feature extraction and assessment using Wavelet Packets for monitoring of machining processes", Mech. Syst. Signal Process., 10(1), 29-53.
DOI
|
37 |
Zitoune, R., Krishnaraj, V. and Collombet, F. (2010), "Study of drilling of composite material and aluminium stack", Compos. Struct., 92(5), 1246-1255.
DOI
|