• 한국초전도ㆍ저온공학회논문지
• /
• 제15권2호
• /
• pp.29-33
• /
• 2013

The understanding of the strain dependence of critical current, $I_c$, in the reversible region is important for the evaluation of the performance of coated conductor (CC) tapes in practical applications. In this study, the stress/strain tolerance of $I_c$ in GdBCO CC tapes with stainless steel substrate stabilized by additional Cu and brass laminate was analyzed quantitatively through $I_c$-strain measurement at 77 K under self-field. The variation in irreversible strain limits of CC tapes by the addition of stabilizing layers was analyzed through the consideration of the pre-strain induced on the GdBCO coating film. The results were then compared with the ones previously reported for GdBCO CC tapes with Hastelloy substrate. As a result, GdBCO CC tapes with stainless steel substrate showed much higher strain tolerance of $I_c$ as compared with those adopting Hastelloy substrate.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.119-126
• /
• 2017

High-precision wire is one of the most important components of lead production. However, no studies have been performed on the dimensional tolerance of these wires, and their capabilities have been deduced through trial and error. Therefore, PIANO, a commercial PIDO tool, was used to systematically determine the optimal parameters for stress minimization. The values obtained from the optimum design were modeled and analyzed using LS-Dyna, a finite element analysis program. Maximum stress was reduced by about 10% compared to its initial values, and the wire now satisfies dimensional tolerance ($10{\mu}m$).

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권2호
• /
• pp.151-161
• /
• 2016

In this paper, we present a $C^3$ quartic B-spline approximation of circular arcs. The Hausdorff distance between the $C^3$ quartic B-spline curve and the circular arc is obtained in closed form. Using this error analysis, we show that the approximation order of our approximation method is six. For a given circular arc and error tolerance we find the $C^3$ quartic B-spline curve having the minimum number of control points within the tolerance. The algorithm yielding the $C^3$ quartic B-spline approximation of a circular arc is also presented.

• Reproductive and Developmental Biology
• /
• 제34권4호
• /
• pp.305-308
• /
• 2010

In this study, we conducted an oral glucose tolerance test (OGTT) so as to compare antidiabetic activities of general potatoes, purple-flesh potatoes, and potato pigments in rats at various concentration levels. After allowing the rats to abstain from food for 12 hours, 10%/20% general potato, purple-flesh potato, and potato extract was orally administered to rats at 100 and 500 mg/kg concentrations. The blood glucose level was measured after an hour. Then, immediately, 1.5 g/kg of sucrose was administered through the abdominal cavity and the blood glucose measured after 30, 60, 120, and 180 minutes. 20% purple-flesh potato group and 10% general potato group, both 100 and 500 mg/kg, showed a significant concentration-dependent decrease in blood glucose levels after 30 minutes. The 100 mg/kg potato pigment group also showed a statistically significant decrease after 30 minutes. In conclusion, administration of 10% general potato, 20% purple-flesh potato, and potato pigment can reduce blood glucose level in an OGTT using rats.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권6호
• /
• pp.407-412
• /
• 2015

In model-based tracking, an accurate 3D model of a target object or scene is mostly assumed to be known or given in advance, but the accuracy of the model should be guaranteed for accurate pose estimation. In many application domains, on the other hand, end users are not highly distracted by tracking errors from certain levels of modeling errors. In this paper, we examine perceptual tracking errors, which are predominantly caused by modeling errors, on subjective evaluation and compare them to computational tracking errors. We also discuss the tolerance of modeling errors by analyzing their permissible ranges.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1437-1443
• /
• 2003

Most optimization problems do not consider tolerance of design variables and design parameters. Ignorance of these tolerances may not fit for the practical problems and can lead to an unexpected conclusion. That is why we suggest robust optimization considering tolerances in both design variables and problem parameters. Using robust optimization, we designed minimum weight annular finned heat transfer tube subject to constraints on limitation of pressure difference and minimum value of total heat transfer. Consequently, robust optimization satisfies tolerance considered practical problems.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.22-29
• /
• 2011

We analyze aberrations in an optical laser printer system in order to know how to determine an allowable non-uniformity of the movement of a light spot, how to determine allowed variation of spot sizes, and how to minimize the influence of these deviations on technological errors. In this paper, the correction and the tolerance of distortion are analyzed by using the concept of zonal and global distortions. The tolerance of field curvature is also obtained from Gaussian beam properties. In order to reduce the change of the entrance pupil position and to make a more compact laser printer system the minimum size of the rotator is exactly derived from the geometry with the introduction of the shift angle of the input beam.

• 한국정밀공학회지
• /
• 제13권7호
• /
• pp.122-132
• /
• 1996

It can be expected that the tolerances of the parts are assigned systematically and thus the parts are designed considering the assemblability in advance in the design stage, if the tolerances can be stored together with the geometric model of the parts and the assemblability of the parts is verified in the computer. In other words, an example of the concurrent engineering is realized. To verify the concepts described above, a new method is proposed to verify the assemblability when the tolerance information and the geometric model of the parts of an assembly are given. This method determines the assemblability by subdividing the range of relative motion between parts until the subdivided region corresponding to free of interference can be found.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1989년도 추계 학술대회지
• /
• pp.22-23
• /
• 1989

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.219.1-219.1
• /
• 2005