• Journal of Mechanical Science and Technology
• /
• v.18 no.12
• /
• pp.2209-2215
• /
• 2004

In the present research work, an automated machine vision system and a new algorithm to interpret the inspection data has been developed. In the past, the control of tolerance of front-chassis-module was done manually. In the present work a machine vision system and required algorithm was developed to carryout dimensional evaluation automatically. The present system is used to verify whether the automobile front-chassis-module is within the tolerance limit or not. The directional ability parameters related with front-chassis-module such as camber, caster, toe and king-pin angle are also determined using the present algorithm. The above mentioned parameters are evaluated by the pose of interlinks in the assembly of an automobile front-chassis-module. The location of ball-joint center is important factor to determine these parameters. A method to determine the location of ball-joint center using geometric features is also suggested in this paper. In the present work a 3-D best fitting method is used for determining the relationship between nominal design coordinate system and the corresponding feature coordinate system.

• Journal of Plant Biotechnology
• /
• v.38 no.1
• /
• pp.94-104
• /
• 2011

Salt stress is a major environmental factor influencing plant growth and development. To identify salt tolerance determinants, we systematically screened salt sensitive rice mutants by use of the Activator/Dissociation (Ac/Ds) transposon tagging system. In this study, we focused on the salt sensitive mutant line, designated SSM-1. A gene encoding a NAC transcription factor homologue was disrupted by the insertion of a Ds transposon into SSM-1 line. The OsNAC075 gene (EU541472) has 7 exons and encodes a protein (486-aa) containing the NAC domain in its N-terminal region. Sequence comparison showed that the OsNAC075 protein had a strikingly conserved region at the N-terminus, which is considered as the characteristic of the NAC protein family. OsNAC075 protein was orthologous to Arabidopsis thaliana ANAC075. Phylogenetic analysis confirmed OsNAC075 belonged to the OsNAC3 subfamily, which plays an important role in response to stress stimuli. RT-PCR analysis showed that the expression of OsNAC075 gene was rapidly and strongly induced by stresses such as NaCl, ABA and low temperature ($4^{\circ}C$). Our data suggest that OsNAC075 holds promising utility in improving salt tolerance in rice.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10B
• /
• pp.849-856
• /
• 2004

This paper proposes a novel superframe formation algorithm for wireless systems with time-slotted superframe structure. The design objective of the proposed algorithm is to provide high performance, stability, error tolerance, as well as power-saving features. The paper presents a comprehensive performance analysis of the Proposed superframe formation algorithm with different types of traffic applied. During analysis several performance metrics are investigated. The error tolerance to beacon loss and the behavior of CBR flows are also studied. We show that the proposed algorithm inherits the advantages of the previously used algorithms, while providing additional features.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.23-31
• /
• 2006

Tolerance analysis of auto body requires the consideration of its compliance because of potentially significant deformation during the spot-weld assembly process. In this paper, a relatively recent method for such analyses is briefly introduced as one can find in the literature. In this method, it is important to take into account of the covariance between the sources of variation as they are closely located, which is the case in most auto body assembly. However, it is often impossible to know such covariance, for example, when a new car is being developed. Therefore, a mechanics-based method is proposed in this paper to estimate the covariance among the sources of variation by finite element analyses and simple statistical computations. The proposed method is illustrated by applying it to a three-dimensional model of real front wheel housing.

• Composites Research
• /
• v.26 no.2
• /
• pp.79-84
• /
• 2013

The prediction and analysis procedure of fatigue damage crack growth life for a stiffener bonded composite laminate panel including center hole and edge notch damage, was studied. It was performed on the basis of fatigue damage growth test results on a laminated skin panel specimens and the analysis results of stress intensity factor for the stiffener bonded composite panel. According to the comparison between experimental test and prediction results of fatigue damage growth life, it was concluded that the residual strength and damage tolerance assessment can be carried out along to the edge notch crack growth.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.345-352
• /
• 2011

This paper focuses on the properties analysis of 9mm bullet dual structure core to substitute current lead core by environment-friendly combination of W-Cu-Ni system high density composite materials. So the four combination samples were made of dual core with the different center of gravity location backward or forward compare to that of lead type bullet, and we experimented about the performance of 9mm bullet dual structure core. In the experimental results, the outer shape of core of four environment friendly samples on the target maintain marginally, while the current lead core bullets are completely crushed after hitting the target. The penetration depth of environment friendly samples excel seven times to lead type bullet and the three out of four samples with forward adjusted center of gravity penetrate deep as twice as ones backward. The impact tolerance of all four samples satisfies military specification, however, more firing tests are required to improve reliability of scattering distribution.

• Journal of the Korea Society for Simulation
• /
• v.16 no.1
• /
• pp.59-68
• /
• 2007

IT (Intrusion Tolerant) technology is for guaranteeing the availability of service for certain amount time against the attacks which couldn't be prevented by the currently deployed information security countermeasures. IT (Intrusion Tolerant) technology mainly makes use of the replication of service and system fur enhancing availability, and voting scheme and GMP (Croup Management Protocol) are used for the correctness of service. This paper presents a scheme to analyze dependability of IT (Intrusion Tolerant) technology through probabilistic and simulation method. Using suggested analysis scheme, we can analyze the robustness and make a sensible trade-offs in of IT (Intrusion Tolerant) technology.

• Journal of the Korean Data Analysis Society
• /
• v.20 no.6
• /
• pp.2721-2731
• /
• 2018

This study purposes to derive the predictive model for the cold tolerance of Brassica napus, using the data collected in the Tree Breeding Lab of Gyeongsang National University during July and August of 2016. Three Brassica napus samples were treated at each of low temperatures from $4^{\circ}C$ to $-12^{\circ}C$ by decrement of $4^{\circ}C$, step by step, and electrolyte leakage levels were measured at each stage. Electrolyte leakages were observed tangibly from $-4^{\circ}C$. We tried to fit the six nonlinear regression models to the electrolyte leakage data of Brassica napus: 3-parameter logistic model, baseline logistic model, 4-parameter logistic model, (4-1)-parameter logistic model, 3-parameter Gompertz model, and (3-1)-parameter Gompertz model. The baseline levels of the electrolyte leakage estimated by these models were 4.81%, 4.07%, 4.19%, 4.07%, 4.55%, and 0%, respectively. The estimated median lethal temperature, LT50, were $-5.87^{\circ}C$, $-6.31^{\circ}C$, $-6.05^{\circ}C$, $-6.35^{\circ}C$, $-4.98^{\circ}C$, and $-5.15^{\circ}C$, respectively. We compared and discussed the measures of goodness of fit to select the appropriate nonlinear regression model.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.10a
• /
• pp.179-179
• /
• 2018

Potato (Solanum tubersosum L.) is susceptible to various environmental stresses such as salt, high temperature, and drought. Especially, potato tuber growth is greatly affected by drought that causes not only yield reduction but also loss of tuber quality. Since unpredictable global weather changes cause more severe and frequent water limiting conditions, improvement of potato drought tolerance can minimize such adverse effects under drought and can impact on sustainable potato production. Genetic engineering can be utilized to improve potato drought tolerance, but such approaches using endogenous potato genes have rarely been applied. We were obtained AtbZIP28 gene transgenic potato plants. It is identified transcript levels at various stress conditions, polyethylene glycol (PEG), NaCl, (ABA). Also, For identification to regulate ER stress response genes in AtbZIP28 gene transgenic potato plant, we screened seven potato genes from RNA-seq analysis under TM treatment. Five and two genes were up- and down-regulated by TM, respectively. Their expression patterns were re-examined at stress agents known to elicit TM, DTT, DMSO and salt stress.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.1051-1065
• /
• 2021

Recent times have seen sustained increases in genetically modified (GM) crops not only for cultivation but also for the utility of food and feed worldwide. Domestically, commercial planting and the accidental or unintentional release of living modified (LM) crops into the environment are not approved. Many detection methods had been devised in an effort to realize effective management of the safety of agricultural genetic resources. In order to develop event-specific polymerase chain reaction (PCR) markers for LM crops, we analyzed the genetic information of LM crops. Genetic components introduced into crops are of key importance to provide a basis for the development of detection methods for LM crops. To this end, a total of 18 varieties from four major LM crop species (maize, canola, cotton, and soybeans) were subjected to an analysis. The genetic components included introduced genes, promoters, terminators and selection markers. Thus, if proper monitoring techniques and single or multiplex PCR strategies that rely on selection markers can be established, such an accomplishment can be regarded as a feasible solution for the safe management of staple crop resources.