• Korean Journal of Computational Design and Engineering
• /
• v.18 no.5
• /
• pp.359-366
• /
• 2013

In the lower arm design process, a tolerance optimization of the variance of design variables should be preceded before manufacturing process, since it is very cost-effective compared to a strict management of tolerance of products. In this study, a design of experiment (DOE) based on response surface model (RSM) was carried out to find optimized design variables of the lower arm, which can meet a given requirement of probability constraint for the process capability index (Cpk) of the weight and maximum stress. Then, the design space was explored by using the central composite design method, in which the 2nd order Taylor expansion was applied to predict a standard deviation of the responses. The optimal solutions satisfying the probability constraint of the Cpk were found by considering both of the mean value and the standard deviation of the design variables.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.1
• /
• pp.126-140
• /
• 2020

This study analyzed the self-identified cold tolerance and wearing behavior of teenagers inside and outside the classroom during winter, considering recent climate changes. A questionnaire was divided into four parts-general information, thermal and comfort sensation inside and outside classroom, self-identified cold tolerance, and wearing behavior to collect data from 322 students. Over several years, changes were noted in respondents' wearing behavior during winter outings, with the biggest being the purchase of a "long padded jacket" for warmth while outside. Most respondents showed similar wearing behavior, such as no difference between the number of clothes worn in a classroom maintained at 20℃ (girls: 8.0±3.1 layer, boys: 6.5±2.1 layer) and outside (girls: 8.8±3.4 layer, boys: 7.1±3.0 layer), despite feeling differently about the thermal sensation inside and outside the classroom. This difference may due to a teenager's lack of knowledge about temperature and their tendency to follow clothing trends. Female students were more sensitive to the cold and wore more garments inside and outside the classroom. Gender-related differences should be considered when educating teenagers about safe and healthy clothing.

• Smart Structures and Systems
• /
• v.2 no.2
• /
• pp.189-208
• /
• 2006

Monitoring large-scale civil engineering structures such as offshore platforms and high-large buildings requires a large number of sensors of different types. Innovative sensor data information technologies are very extremely important for data transmission, storage and retrieval of large volume sensor data generated from large sensor networks. How to obtain the optimal sensor set and placement is more and more concerned by researchers in vibration-based SHM. In this paper, a method of determining the sensor location which aims to extract the dynamic parameter effectively is presented. The method selects the number and place of sensor being installed on or in structure by through the tolerance domain statistical inference algorithm combined with second order sensitivity technology. The method proposal first finds and determines the sub-set sensors from the theoretic measure point derived from analytical model by the statistical tolerance domain procedure under the principle of modal effective independence. The second step is to judge whether the sorted out measured point set has sensitive to the dynamic change of structure by utilizing second order characteristic value sensitivity analysis. A 76-high-building benchmark mode and an offshore platform structure sensor optimal selection are demonstrated and result shows that the method is available and feasible.

• Transactions of Materials Processing
• /
• v.12 no.2
• /
• pp.116-122
• /
• 2003

In the Prestressed die design for cold working, many constraining conditions should be considered to insure the die safety and to improve the dimension accountancy products. Among the constraining conditions, yielding conditions, diameter ratios and interferences between rings are very important. . In this paper, therefore, flexible tolerance method was used in order to search the optimum values of design variables. The maximum inner pressure is used as objective function in this numerical analysis. In the design Process, it was also involved the safety factor to the yield strength of each ring by considering the allowable tensile or compressive hoop stress in each ring. The proposed technique has been applied to the die design of backward extrusion process, and it's analytical results have been compared with that of the conventional design method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.718-721
• /
• 2001

For higher recording density in optical data storage, near field optics is being actively researched as one of the promising alternatives. But the tight assembling tolerance in NFR is one of big barriers to overcome for the realization of it. In this paper, the tolerances in assembling optic components of NFR system are analyzed. Some of key tolerances can be loosened by the optimization of objective lens design. But one of them become too tight by the optimization and should be controlled by other means. One of possible methods to control the tolerance is discussed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.2
• /
• pp.37-43
• /
• 2007

ANOVA is widely used for measurement system analysis. It assumes that the measurement error is normally distributed, which may not be seen in certain industrial cases. In this study, the exact and bootstrap confidence intervals for precision-to-tolerance ratio (PTR) are obtained for the cases where the measurement errors are normally and non-normally distributed and the reproducibility variation can be ignored. Lognormal and gamma distributions are considered for non-normal measurement errors. It is assumed that the quality characteristics have the same distributions of the measurement errors. Three different bootstrap methods of SB (Standard Bootstrap), PB (Percentile Bootstrap), and BCPB (Biased-Corrected Percentile Bootstrap) are used to obtain bootstrap confidence intervals for PTR. Based on a coverage proportion of PTR, a comparative study of exact and bootstrap methods is performed. Simulation results show that, for non-normal measurement error cases, the bootstrap methods of SB and BCPB are superior to the exact one.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.4
• /
• pp.63-68
• /
• 2019

The Korean traffic systems for transportation vulnerable are still under development and their social life are limited even if the traffic environment systems are developed consistently. To secure his/her mobility right, it has been required to set up the particular system for the traffic welfare, for example the express and intercity bus operations for wheelchair users. The express and intercity bus development for wheelchair users based on the original bus model has been performed. This study has investigated the safety tolerance for the bus stiffness, rollover and side impact characteristics to ensure occupant safety using the finite element models. The wheelchair bus model showed the improved crashworthiness according to the partially reinforced structure and better safety tolerance for the wheelchair users.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.203-209
• /
• 2011

This study develops three new models that are practically applicable to three stages of Taguchi's robust design, which includes system design, parameter design and tolerance design. In system design, the Multiple Loss Function Analysis(MLFA) and Overall Loss Index(OLI) which reflect upon weight of characteristics and importance of specification are developed. Moreover parameter design presents Process Capability Index(PCI), $C_{PUK}$ and $C_{PLK}$, in order to segregate Signal-To-Noise Ratio(SNR) into accuracy and precision for an evaluation of relative comparison. In addition, tolerance design presents the new model of allowance computation for assembled product which is primarily derived from safety margin(SM) considering functional limit and specification. The guideline of those three new models, which include systematic charts and applicable illustrations, offers convenience for practitioners in the field. Hence, the practical applications could be made with the steps of robust designs such as system design, parameter design and specification allowance design.

• Mycobiology
• /
• v.48 no.4
• /
• pp.296-303
• /
• 2020

Three yeast strains (Hue-1, Hue-8, and Hue-19) with strong heavy metal tolerance were isolated from mangosteen from Hue city, Vietnam. They exhibited identical phenotype and phylogeny. Sequence analysis of the D1/D2 region of the LSU rRNA gene and the internal transcribed spacer (ITS) region demonstrated that the closest relative of these strains is Papiliotrema sp. with 2.12% and 3.55-3.7% divergence in the D1/D2 domain, and ITS domain, respectively. Based on the physiological, biochemical, and molecular data, the three strains belong to a novel species of Papiliotrema genus, for which the name Papiliotrema huenov sp. nov. is proposed. These strains are highly tolerant of heavy metals compared to other yeasts, being able to grow in the presence of 2 mM Pb (II), 2 mM Cd (II), and up to 5 mM Ni (II), but no growth was observed in the presence of 1 mM As (III).

• Korean Journal of Microbiology
• /
• v.25 no.3
• /
• pp.229-237
• /
• 1987

To determine the characteristics of heterotrophic bacterial community in estuarine ecosystem, water and sediment samples were taden from Naktong estuary. All isolates were compared with 73 characters and described by cluster analysis. With same characters, 30 reference strains were able to divide into approximate species level at 80% similarity (S value). Diversity indices ($H^{1}$) of sediment column isolates were higher than water column isolates. The bacterial community commonly appeared in water and sediment column was reduced with going to downstream. Tolerance indices for temperature (Pt) and salinity (Ps) were also higher in sediment isolates than in water isolates. The bacterial community in sediment column is believed to be composed with diverse populations compared to water column and maintains its stability against various environmental changes with high physiological tolerances.