• Journal of the Korean Society of Radiology
• /
• v.15 no.4
• /
• pp.463-472
• /
• 2021

Demand for examinations using transvaginal transducer with high frequencies is increasing to observe pelvic organs in gynecological ultrasound tests. However, the quality control of the replacement probe in clinical trials is not properly implemented and the evaluation criteria have not been established. Therefore, 58 transvaginal transducers and 20 convex transducers were applied to the ATS-539 ultrasound phantom for 20 ultrasound devices currently in clinical use to obtain their respective images and measure them quantitatively and qualitatively. For quantitative measurements, vertical measurement, horizontal measurement, and focal zone and qualitative measurements, dead zone, axial·lateral resolution, sensitivity, functional resolution, gray scale·dynamic range were performed. Quantitative statistical analysis showed significant differences between the two transducers in the lateral measurement and local area (p<0.05). qualitative comparative analysis showed differences in sensitivity and functional resolution. This occurs due to the difference in frequency between transducers and the transducer's injection geometry. Based on the above experiments, the tolerance for horizontal measurement is raised to 10% (±8 mm), the tolerance for sensitivity is observed up to 6 cm deep, which is 12 cm deep,which is the level of the third quartile (75%). The permissible range of functional resolution is up to 6 (12 cm), 6 (12 cm), 11 (11 cm), 9 (9 cm), 6 (6 cm) target, which is the level of the third quartile (75%). It is considered reasonable to adjust the depth of targets in gray scale·dynamic range to measure at a depth of 2 cm, which is 50% of the depth of 4 cm. As above, the criteria for evaluating the quality of transvaginal transducer for use in the past have been proposed and it is expected that this study will be used as a basic data for the production of phantom exclusively for transvaginal transducer in the future.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.327-337
• /
• 2022

Ecological restoration is considered a good means to prevent biodiversity loss in terms of the ecosystem's health and sustainability. However, there are difficulties in putting it into practice as there is no comprehensive and objective standard for the selection of plant species, such as environmental, ecological factors, and restoration goal setting. Therefore, this study developed an evaluation index necessary for selecting plant species for restoration using the Delphi method that synthesizes the opinions of the expert group. A survey with 38 questionnaires was conducted twice for experts in ecological restoration, etc., and the importance and priority of evaluation indicators were analyzed by dividing the restoration targets into inland and island regions. The result of the importance analysis showed that "native plants" had the highest average of 4.9 among the evaluation indices in both inland and island regions, followed by "seed security", "propagation", and "root growth rate". In the inland region, the index priority was analyzed in the order of "native plants", "appearance frequency", "root growth rate", "distribution range", and "seed security" in the island region, it was analyzed in the order of "native plants", "root growth rate", "appearance frequency", "distribution range", and "tolerance", showing slight differences between the two indicators. As a result of the importance and priority indicator analysis, we set the mean importance and priority of 4.1 and 2.9, respectively, in the inland region and 4.2 and 2.9, respectively, in the island region. As for the criteria of selecting plant species for ecological restoration, the "native plants" had the highest importance and priority. "Seed securing", 'viability", "topography", "proliferation", "tolerance", "soil conditions", "growth characteristics", "early succession", "distribution range", "appearance frequency", and "germination rate" were classified into subgroups of low importance and priority. The lowest indicators were "final stage of succession", "transition period", 'transition stage", "root", "reproduction", "soil", "appearance", "technology", "landscape", "climate", and "germination rate". We expected that the findings through objective verification in this study would be used as evaluation indicators for selecting native plant species for ecological restoration.

• Journal of dental hygiene science
• /
• v.12 no.2
• /
• pp.109-113
• /
• 2012

One hundred seventy four Streptococcus pneumoniae clinical isolates were categorized depending on the types of specimens, the age and the gender, respectively. All isolates were analyzed the characteristics of the multi-drug resistance including levofloxacin antibiotics. In the results of analysis depending on the type of samples, it had been confirmed that sputum was the main source of pneumonia infection because 156 of 174 strains (89.7%) were isolated in sputum samples. The opportunity for isolating the S. pneumoniae that had tolerance to levofloxacin was increased in over 51 age patients group compared with other age and male group. Eight strains of isolates were evaluated higher resistant to levofloxacin, and those also showed multi-drug resistant including penicillin, tetracycline, erythromycin, clindamycin and trimethoprim-sulfamethoxazole. In the results of sequence analysis of quinolone resistance determining region in SP32 (MIC $64{\mu}g/mL$) and SP96 (MIC $8{\mu}g/mL$) which were levofloxacin resistant strains, an amino acid substitutions were found Ser-81$\rightarrow$Phe in both GyrA of SP32 and SP96, and Ser-11$\rightarrow$Gly in only SP96. A Ser-79$\rightarrow$Phe substitution of ParC was found in both.

• Journal of Plant Biotechnology
• /
• v.42 no.4
• /
• pp.342-349
• /
• 2015

Kiwifruit is a new fruit crop that was commercialized in the late 1970s. Recently, its cultivation and consumption have increased rapidly worldwide. Kiwifruit is a dioecious, deciduous, and climbing plant having fruit with hairs and various flesh colors and a variation in ploidy level; however, the industry consists of very simple cultivars or genotypes. The need for efficient cultivar improvement together with the evolutional and biological perspectives based on unique plant characteristics, have recently encouraged genome analysis and bioinformatics application. The draft genome sequence and chloroplast genome sequence of kiwifruit were released in 2013 and 2015, respectively; and gene annotation has been in progress. Recently, transcriptome analysis has shifted from previous ESTs analysis to the RNA-seq platform for intensive exploration of controlled genetic expression and gene discovery involved in fruit ascorbic acid biosynthesis, flesh coloration, maturation, and vine bacterial canker tolerance. For improving conventional breeding efficiency, molecular marker development and genetic linkage map construction have advanced from basic approaches using RFLP, RAPD, and AFLP to the development of NGS-based SSR and SNP markers linked to agronomically important traits and the construction of highly saturated linkage maps. However, genome and transcriptome studies have been limited in Korea. In the near future, kiwifruit genome and transcriptome studies are expected to translate to the practical application of molecular breeding.

• Korean Security Journal
• /
• no.24
• /
• pp.125-146
• /
• 2010

The G20 summit is the premier forum for international economic cooperation and it will be held in Seoul in November 2010. However, protests are expected during the Seoul summit, as a part of the deepening global war against capitalism. The Korean Police need to deal with these protests effectively in order to provide security to the participating leaders and make the meeting run on wheel as planned. The current study attempts to analyze the death of Ian Tomlinson who died in the context of a heavily policed protest during 2009 G20 London summit. There are number of unique features regarding this incident, such as the public scrutiny of police conduct through video footage, the police use of excessive force, and the process to hold the police to account for misconduct. This incident caused serious damages to the public's faith in the British police. Based on the analysis, this study found that during the G20 London summit British police had the problems such as the lack of the clear standards on the use of force, improper training in the use of force, poor communications with the media and protesters, inappropriate use of the close containment tactic, and the failure to display police identification. Therefore, this study suggests the inducement of peaceful protests, the adoption of a set of standards on the use of force, public order training that is more directed and more relevant to the public order challenges facing the Korean police, improvement of the communication with the media and protesters, enhancement of individual officer's accountability as public order policing strategies for G20 Seoul summit meeting. However, the most fundamental principle is that Korean police must place a high value on tolerance and winning the consent of the public.

• Journal of Welding and Joining
• /
• v.30 no.2
• /
• pp.59-64
• /
• 2012

Welding is an essential process in the automotive industry. Most welding processes that are used for auto body are spot welding and $CO_2$ welding are used in a small part. In production field, $CO_2$ welding process is decreased and spot welding process is increased due to welding quality is poor and defects are occurred in $CO_2$ welding process frequently. But $CO_2$ welding process should be used at robot interference parts and closed parts where spot welding couldn't. Because of the 0.65mm ~ 2.0mm thickness steel sheet were used in the automotive industry, poor quality of welding area such as burn through and under fill were happened frequently in $CO_2$ process. In this paper, we will study about the penetration depth which gives a huge impact on burn through changing a degree of base metal, welding position and torch angle. Voltage, current and welding speed were fixed but degree of base metal, welding position and torch angle were changed. And Cold- Rolled(CR) steel sheet was used. Penetration depth was analysed by multiple regression analysis to derive approximate calculations. And reliability of approximate calculations were confirmed through additional experiments. As the results of this research, we confirmed the effect of torch and plate angle to bead shape. And we present a possibility that can simulate more accurate to weld geometry, as deduced the verification equations that has tolerance of less than 21.69%.

• Journal of Korean Society on Water Environment
• /
• v.28 no.4
• /
• pp.561-573
• /
• 2012

The object of this study was to analyze long-term water quality gradients during 1992-2008 at six sites of Geumho River and near-by two sites of Nakdong River and their influences on fish trophic guilds and tolerance guilds along with ecological health. Water quality including biological oxygen demand (BOD), chemical oxygen demand (COD), conductivity, total phosphorus (TP), total nitrogen (TN), and total suspended solids (TSS) varied largely depending on the sampling locations and seasons. Values of ambient BOD, COD, TP, and TN were greater in the downstream than in the upstream reach, and seasonal and interannual variabilities were also higher in the downstreams. This phenomenon was evident due to a dilution by the Asian monsoon rainfall during the monsoon. These outcomes indicate that point sources near the downstream are important for the chemical conditions, but also seasonal stream runoff was considered as an important factor regulating the chemical conditions. Conductivity decreased rapidly during the summer due to ionic dilution, and nutrients (N, P), BOD, COD had an inverse function of seasonal precipitation. Based on the water quality, we selected two sites (control site = $C_s$ vs. impacted site = $I_s$) for impact analysis of water chemistry on fish community and trophic/tolerant guilds. Fish guild analysis showed that species diversity was higher in the headwater stream ($C_s$) than the impacted downstream ($I_s$), and that the proportion of tolerant and omnivore species were greater in the impacted site of downstream. Comparisons of water quality between Geumho River and Nakdong River indicated that Geumho River was considered as a point source which degradated water quality to the Nakdong River. Overall, chemical water quality and fish guild analysis suggest that even if current chemical quality got better after 1996 due to continuous constructions of wastewater disposal plants near the downstreams, fish compositions of tolerant and omnivores were still dominated the community. Thus, biological restoration based on ecological health is required for the ecosystem conservation.

• Journal of Korea Water Resources Association
• /
• v.33 no.5
• /
• pp.537-550
• /
• 2000

In this study, Neural Networks models were used to forecast daily streamflow at Jindong station of the Nakdong River basin. Neural Networks models consist of CASE 1(5-5-1) and CASE 2(5-5-5-1). The criteria which separates two models is the number of hidden layers. Each model has Fletcher-Reeves Conjugate Gradient BackPropagation(FR-CGBP) and Scaled Conjugate Gradient BackPropagation(SCGBP) algorithms, which are better than original BackPropagation(BP) in convergence of global error and training tolerance. The data which are available for model training and validation were composed of wet, average, dry, wet+average, wet+dry, average+dry and wet+average+dry year respectively. During model training, the optimal connection weights and biases were determined using each data set and the daily streamflow was calculated at the same time. Except for wet+dry year, the results of training were good conditions by statistical analysis of forecast errors. And, model validation was carried out using the connection weights and biases which were calculated from model training. The results of validation were satisfactory like those of training. Daily streamflow forecasting using Neural Networks models were compared with those forecasted by Multiple Regression Analysis Mode(MRAM). Neural Networks models were displayed slightly better results than MRAM in this study. Thus, Neural Networks models have much advantage to provide a more sysmatic approach, reduce model parameters, and shorten the time spent in the model development.

• Journal of the Korean Regional Science Association
• /
• v.31 no.4
• /
• pp.47-69
• /
• 2015

The purpose of this study is to analyze regional spatial distribution and characteristics with the Talent Magnet Potential Index(TMPI), which is calculated through the extra-regional talent attracting environment(Magnet factors) and intra-regional talent cultivating environment(Incubator factors) of each region. As a result, Seoul, Daejeon, Gyeonggi, Ulsan etc. ranked highest, and regions developed in knowledge-based services, R&D capability, and manufacturing turned out to have a higher TMPI. The regions were categorized into 4 types, and the regional type analysis showed that the cumulative effects of Type I(Talent comparative advantage type) and Type III(Talent absolute shortage type) contribute to widening the economic gap among these regions. In addition, although the metropolitan based Type IV(intra-regional talent dependant type) had excellent talent training capability, there seemed to be an outflow of talent into Type I or Type II(extra-regional talent dependant type). This paper has done a correlation analysis to test the validity of the TMPI. As a result, the correlation between talent by type and TMPI turned out to be very high. The correlation coefficient with 2T turned out to have the highest correlation, showing that tolerance contributes a much greater deal to talent attracting and training than expected. Finally, based on the main analytical results, implications for talent attraction & training policy projects and 7 improvement plans have been proposed.

• Korean Journal of Optics and Photonics
• /
• v.23 no.5
• /
• pp.189-196
• /
• 2012

A floating optical system is a system that moves more than 2 groups to focus at the camera lens. At the camera optics, the floating system that is mainly used is an optical system such as a macro lens which changes magnification very much. When the floating system is assembled and fabricated in the factory, there are differences between the image plane of the sensor and the focal plane of the infinity or macro state. Therefore, in a considerable proportion of cases, the focus adjustment to minimize the difference of BWD(Back Working Distance) is carried out in the process of manufacturing. In this paper, in order to decide the movement of each group in a floating system, we evaluated the rotation angle of CAM for the focus adjustment. We know that the maximum magnification of macro state is corrected by this numerical method for the focus adjustment, too. We investigated the limit of CAM rotation angle of the system by using statistical analysis for CAM rotation angle, which uses the focus adjustment of the floating system with symmetric error factors.