• Journal of Engineering Education Research
• /
• v.23 no.2
• /
• pp.3-13
• /
• 2020

Key objective of cornerstone design is that students are able to experience developing creative design concepts through team activities, but the objective is hard to achieve. Based on a study of research materials, this paper asserts that the possibilities of creative problem solving can be promoted in question-centering ideation model if design artifacts are represented in some forms that could invoke design thinking and then the solution space is appropriately established. In particular, design problem on which divergent questions are asked should be explored and defined so that it can be a linguistic artifact represented by various visual aids. It is recommended that curriculum is modified so that students can experience creative conceptual design.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.2
• /
• pp.289-298
• /
• 1999

We consider a minimax approach to make a design robust to many types or uncertainty arising in reality when dealing with non-normal linear models. We try to build a design to protect against the worst case, i.e. to improve the "efficiency" of the worst situation that can happen. In this paper, we especially deal with the generalized linear model. It is a known fact that the generalized linear model is a universal approach, an extension of the normal linear regression model to cover other distributions. Therefore, the optimal design for the generalized linear model has very similar properties as the normal linear model except that it has some special characteristics. Uncertainties regarding the unknown parameters, link function, and the model structure are discussed. We show that the suggested approach is proven to be highly efficient and useful in practice. In the meantime, a computer algorithm is discussed and a conclusion follows.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.6
• /
• pp.429-440
• /
• 2007

The purpose of this research is to develop the Human-centered CAD system in which human factors can be considered during the design stage. For this system there are several issues to research, like the digital human modeling technology, the definition of interactions between human and product, the simulation of human motion when using the product, and the bio-mechanical analysis of human, etc. This paper introduces how to construct the kinematical structure of the digital human model. For our digital human model H-ANIM, the international specification of humanoid animation is referenced. And we added the skeleton geometry and the skin surfaces to our model. And it can manipulate its joints by forward kinematics. Also the IKAN inverse kinematics algorithm is adopted to support the posture prediction of the digital human model in the product environment. All of these ideas are implemented using CAD API so that we can apply these functions to the current commercial CAD systems. In this manner, the human factor issues can be effectively taken into account at the early design phase and the costs of bio-mechanical evaluation will be significantly reduced.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.115-127
• /
• 2000

The purpose of this study is to propose the Design Object Model for implementation of an integrated structural design system for building structures. This study outlines the step-by-step development methodologies of the Design Object Model, which covers classification and modeling of the building design information. The Design Object Model has been efficiently developed through the proposed development methodologies. As a result, the Design Object Model has been proved to be efficient in design information management by representing the information from planning perspective, in recognition of structural member in space by the topology design object, and in representation of analysis s design information.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.634-637
• /
• 2010

This paper suggests the design of MVC model for an authorization tool of UML class diagram. In the design of MVC model, it is designed to define view, controller and model and perform the individual role of each component. The View represents GUI and the Controller is responsible for data input and output and the Model is to handle the business logic. The MVC model design for an authorization tool of class diagram gives the role independently and tries to be flexible with system by dividing into the suitable features of each component.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.636-643
• /
• 1995

The accurate determination of the fuel-cladding gap conductance as functions of rod burnup and power level may be a key to the design and safety analysis of a reactor. The incorporation of a sophisticated gap conductance model into nuclear design code for computing thermal hydraulic feedback effect has not been implemented mainly because of computational inefficiency due to complicated behavior of gap conductance. To avoid the time-consuming iteration scheme, simplification of the gap conductance model is done for the current design model. The simplified model considers only the heat conductance contribution to the gap conductance. The simplification is made possible by direct consideration of the gas conductivity depending on the composition of constituent gases in the gap and the fuel-cladding gap size from computer simulation of representative power histories. The simplified gap conductance model is applied to the various fuel power histories and the predicted gap conductances are found to agree well with the results of the design model.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.375-379
• /
• 2003

In this paper, the linear and nonlinear strut-tie model approaches for the analysis and design of concrete structures are suggested. The validity of the approaches are examined through the strength analysis of four dapped-end beams tested to failure. According to the analysis results, the nonlinear strut-tie model approach which takes the various characteristics of nonlinear behaviors into account in the analysis and design of structural concrete and predicts the strength of structural concrete proven to be an effective method for structural analysis and design.

• The Journal of Society for e-Business Studies
• /
• v.4 no.1
• /
• pp.145-157
• /
• 1999

The challenge is to maximize the time-to-market benefits of concurrent engineering while maintaining control of data and distributing it automatically to the people who need it when they need it. The way PDM systems cope with this challenge is that master data is held only once in a secure vault where its integrity can be assured and all changes to it monitored, controlled and recorded. The structure of PDM is various from vendor, but they have common module. That is PDM and it is most important. The goal is to design the workflow in PDM using object-oriented modeling method. The past methods have concentrated on the flow between workflow engine and agent, but this paper will focus on task. We will model task as individual object. This paper uses OMT(Object Modeling Technique) by James Rumbaugh for base modeling tool and uses DCOM(Distributed Component Object Model) for base ORB(Object Request Broker). Research object is to design the static object model, to design state change by dynamic model and to design data transition by functional model.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.176-181
• /
• 2011

A role of cost modeler is that of facilitating design process by the systematic application of cost factors so as to maintain sensible and economic relationships between cost, quantity, utility and appearance. These relationships help to achieve the client's requirements within an agreed budget. The purpose of this study is to develop a parametric cost estimating model for the early design stage by using the multi-dimensional system of OLAP (On-line Analytical Processing) based on the case of quantity data related to architectural design features. The parametric cost estimating models have been adopted to support decision making in the early design stage. These models typically use a similar instance or a pattern of historical case. In order to effectively use this type of data model, it is required to set data classification and prediction methods. One of the methods is to find the similar class in line with attribute selection measure in the multi-dimensional data model. Therefore, this research is to analyze the relevance attribute influenced by architectural design features with the subject of case-based quantity data used for the parametric cost estimating model. The relevance attributes can be analyzed by Analytical Characterization. It helps determine what attributes to be included in the OLAP multi-dimension.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1500-1503
• /
• 1996

This paper combines the disturbance accommodating control(DAC) and nonlinear model inversion control for a skid-to-turn(STT) missile. The missile autopilot may be designed to be robust with respect to a variety of uncertainties. We proposes the two step control design method. Nonlinear model inversion control is used as the main design method. Due to the model uncertainties and external disturbances, the exact nonlinear model inversion can not be achieved. DAC is designed to detect, to identify, and to compensate these uncertainties. DAC's disturbance observer is linear. Thus it is easy to implement. It does not cause the convergence problem due to coexistence between the modeling uncertainties and external disturbances. 6 DOF simulation results show that the proposed method may improve the missile tracking performance.