• Weed & Turfgrass Science
• /
• v.5 no.2
• /
• pp.101-104
• /
• 2016

Curvularia leaf blight of creeping bentgrass (Agrostis stolonifera) putting green by caused Curvularia trifolii was observed in Hapcheon, Korea. In July to September 2014, curvularia leaf blight developed on leaf blades of creeping bentgrass as small water-soaked lesions that subsequently turned into dark-colored, necrotic spots. The spots were expanded and became gray, grayish-brown, or light brown, circular to oblong lesions with purple to dark brown borders that often were surrounded by a yellow halo. The necrotic lesions coalesced, became irregular in shape and caused tip or complete blighting of the leaves. Blighted leaf blades appeared grayish-white to tan. The fungus was identified by morphological characters and 16S rDNA sequencing as C. trifolii. Conidia of the pathogen were short, with predominantly 3-septa, straight or often curved, with end cells frequently paler than intermediate cells. Size of the 3-septate conidia in culture are $26{\sim}28{\times}11{\sim}12{\mu}m$. Pathogenicity of the fungus was proved by artificial inoculation on the host. This is the first report of C. trifolii causing leaf blight on creeping bentgrass in Korea.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.4
• /
• pp.315-322
• /
• 1990

In order to find out the most favorable shape and structure of pot for conger eel, Astroconger myriaster(Brevoort), the box type, tube type and flat box type of net pots and the pipe type of plastic pot were prepared. Then, the ability of the pots attracting the eel into them were investigated through a tank experiment. The attracting ability was highest in the pipe type without distinction of its length, 50cm and 60cm. In the flat box type, the effective height of pot and the diameter of entrance tip turned out 5cm respectively. But the ability was very poor in the rest pots, especially in the tube type. Thus, the pipe type and flat box type of pots were employed again in a field experiment for comparing their catches with those of the conventional bamboo and plastic pots. In the experiment, the catches were the most in the pipe type and second in the flat box type. But the bamboo and plastic pots both produced comparatively low catches, showing no significant difference between them. It was therefore concluded that the pipe type of pot might be the most favorable one for catching the conger eel.

• Parasites, Hosts and Diseases
• /
• v.25 no.1
• /
• pp.51-58
• /
• 1987

Tegumental ultrastructures of Echinochasmus japonicus were observed by scanning electron microscopy. The worms were recovered from albino rats which were experimentally infected with the metacercariae obtained from Pseudorasbora parva. Followings are summarized findings. 1. The worms were minute and plumpy gourdshaped with attenuated anterior and round posterior end. The tegument of whole body was wrinkled transversely and covered with cobblestone-like cytoplasmic processes. 2. Head crown was armed with 24 collar spines which were embedded in cytoplasmic pockets. The spines were arranged in a row with an interruption at dorsomedian line, however, the 2nd and the 4th spines were outstretched more than others. Oral and ventral suckers were muscular with numerous type II sensory papillae, and genital pore opened between the two suckers. 3. Tegumental spines were spade-shaped with broad base and pointed tip. They were compact in ventra-lateral tegument or dorsal surface of anterior body. They were not found between the two suckers and dorsal surface of posterior body. 4. Two types of sensory papillae, uni-ciliated (Type I) and roundly swollen sensory papillae (Type II), were observed. The type I papillae were chiefly distributed on ventral surface of tegument and type II were on the lips of suckers. Arrangement of collar spines, shape and distribution of tegumental spines or sensory papillae are regarded as characteristic features of E. japonicus.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.396-403
• /
• 2018

In this paper, a high-performance and low-noise centrifugal fan is developed for cooling automotive seats which provide a driver with pleasant driving environment. First, the flow characteristics of the existing fan unit was analyzed using a fan performance tester and CFD (Computational Fluid Dynamics) simulations. The analysis of the predicted flow field indicated vortex flow near the tip of fan hub and stagnation flow on the top of fan hub. Two design points are devised to reduce the vortex flow and the stagnation flow observed in the existing fan unit. First, the cut-off clearance which is the minimum distance between the fan blade and the fan housing is increased to reduce the vortex strength and, as a result, to reduce the overall sound pressure level. Second, the hub shape is more modified to eliminate the stagnation flow. The validity of proposed design is confirmed through the numerical analysis. Finally, a prototype is manufactured with a basis on the numerical analysis result and its improved flow and noise performances are confirmed through the P-Q curves measured by using the Fan Tester and the SPL (Sound Pressure Level) levels measured in the anechoic chamber.

• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.200-207
• /
• 2019

The aim of this study was to provide the basic information necessary to identify Korean fir (Abies holophylla), momi fir (A. firma), and Nikko fir (A. homolepis), and other fir trees planted in South Korea that are protected by law. Analysis of the morphological characteristics of the needles from each sample was investigated. The shape of the needle-leaf tip from A. holophylla was acute, whereas that from A. firma and A. homolepis was emarginate and that from the protected fir trees was obtuse. The number of stomata on the needles was not significantly different between A. holophylla and A. firma, and the number of stomata on the needles from A. homolepis and the protected fir trees were highly similar. In addition, the genetic differences among the Abies species were analyzed using the sequences of five chloroplast DNA regions-matK, atpF-atpH, rpoC2-rps2, rpoC1, and psbA-trnH.The atpF-atpH and psbA-trnH regions were useful for discriminating A. firma from the other species, but there were no differences among A. holophylla, A. homolepis, and the protected fir trees. The same chloroplast sequences were found in both A. holophylla and A. homolepis, which suggests that additional genetic studies might be necessary to identify the Abies species planted in both South Korea and Japan.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.2
• /
• pp.163-170
• /
• 2021

This study was conducted to create a technology to remove acne bacteria with human-friendly materials. First, the Cutibacterium acnes (C. acnes) were adsorbed to the mica disc to grow, and then the biofilm was checked through an atomic microscope to see if the biofilm had grown. Based on the topographic image, the shape changed round, the size was 17% longer on average, and the phase value of the resonance frequency separating materials was observed as a single value, the biofilm grown by covering the extracellular polymeric substrate (EPS). As a result of processing 50 mM of amino acids in the matured biofilm, the concentration of C. acnes decreased when valine, serine, arginine and leucine were treated. Scanning with nanoindentation and AFM contact modes confirmed that the hardness of biofilms treated with Valine (Val) increased. This indicates that an AFM tip measured cell which may have more solidity than that of EPS. The experiment of fluorescent tagged to EPS displays an existence of EPS at the condition of 10 mM Val, but an inhibition of growth of EPS at the 50 mM Val. Number of C. acnes was also reduced above 10 mM of Val. Weak adhesion of biofilm generated from an inhibition of EPS formation seems to induce decrease of C. acnes. Accordingly, we elucidated that Val has an efficiency which eliminates C. acnes by approach of an inhibition of EPS.

• Korean Journal of Ichthyology
• /
• v.33 no.2
• /
• pp.57-63
• /
• 2021

This study was carried out to clarify the egg, larvae and juveniles development of Carassius cuvieri in Nakdong River, Gyeongbuk. The amount of spawning of female C. cuvieri was about 30,400~44,900 (average 37,650±7,250). The egg shape was circular and the size was 1.24~1.37 mm (average 1.31±0.04 mm, n=30). At 100 hours after fertilization, more than of the total embryos were hatched. The newly hatched larvae had an 4.69~5.65 mm in total length (average 5.15±0.31 mm, n=10) and had egg yolk in the abdomen. At 3 days after hatching, the preflexion larvae absorbed all egg yolk was 6.27~6.70 mm in total length (average 6.59±0.08 mm, n=10). On the 10 days after hatching, the postflexion larvae were 8.71~8.92 mm in total length (average 8.81±0.07 mm, n=10), and the tip of the caudal fin was bent at 45°. On the 42 days after hatching, the total length of 15.1~16.8 mm (average 15.8±0.57 mm, n=10) was transferred to juvenile as the number of fins was (iii17 dorsal fins, iii4 anal fins) reached a constant number of each part.

• Korean Journal of Ichthyology
• /
• v.34 no.2
• /
• pp.86-95
• /
• 2022

Egg development and morphological change of larvae and juvenile of the Roughscale sole, Clidoderma asperrimum, were investigated in the present study. Adult fishes were collected on the East Sea, Korea, from 2017 to 2018 and reared in a circular water tank (Ø 6×1 m) at water temperature of 12.8±1.9℃. Fertilized eggs ranged from 1.42 to 1.59 mm (mean 1.51±0.04 mm, n=50) in diameter. The eggs were spherical in shape, transparent, floating and colorless. The egg yolk was separated from the egg membrane 60 mins post-fertilization (PF), and an embryo was formed in 62 hrs PF. More than 50% of the eggs hatched within 144 hrs PF in the range of 10.2~11℃(mean 10.8℃). The size of the newly hatched larvae were 4.22~4.64 mm (mean 4.53±0.16 mm) in total length (TL), their mouth and anus were not open yet. At 10 days after hatching, the preflexion larvae reached 5.88~6.62 mm (mean 6.31±0.33 mm) in TL, and the yolk absorption was completed and the mouth began to open. At 55 days after hatching the larvae reached to flexion larvae stage and they were 10.4~13.3 mm (mean 12.7±1.3 mm) in TL, and the tip of notochord was bent upward. At 120 days after hatching the larvae reached to juvenile stage and they were 35.3~40.5 mm (mean 39.5±2.4 mm) in TL. Their all fins had completed set of the fin-rays (D. 79~94: A. 63~75) and the juveniles adopted a benthic life.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.12
• /
• pp.33-42
• /
• 2007

The assessment of shear wave velocity($V_s$) in soft soils is extremely difficult due to the soil disturbances during sampling and field access. After a ring type field $V_s$ probe(FVP) has been developed, it has been applied at the southern coastal area of the Korean peninsular. This study presents the upgraded FVP "blade type FVP", which minimizes soil disturbance during penetration. Design concerns of the blade type FVP include the tip shape, soil disturbance, transducers, protection of the cables, and the electromagnetic coupling between transducers and cables. The cross-talking between cables is removed by grouping and extra grounding of the cables. The shear wave velocity of the FVP is simply calculated by using the travel distance and the first arrival time. The large calibration chamber tests are carried out to investigate the disturbance effect due to the penetration of FVP blade and the validity of the shear waves measured by the FVP. The blade type FVP is tested in soils up to 30m in depth. The shear wave velocity is measured every 10cm. This study suggests that the upgraded blade type FVP may be an effective device for measuring the shear wave velocity with minimized soil disturbance in the field.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5A
• /
• pp.861-872
• /
• 2006

The element free Galerkin method is extended by the local partition of unity method to model the cohesive cracks in two dimensional continuum. The shape function of a particle whose domain of influence is completely cut by a crack is enriched by the step enrichment function. If the domain of influence contains a crack tip inside, it is enriched by a branch enrichment function which does not have the LEFM stress singularity. The discrete equations are obtained directly from the standard Galerkin method since the enrichment is only for the displacement field, which satisfies the local partition of unity. Because only particles whose domains of influence are influenced by a crack are enriched, the system matrix is still sparse so that the increase of the computational cost is minimized. The condition for crack growth in dynamic problems is obtained from the material instability; when the acoustic tensor loses the positive definiteness, a cohesive crack is inserted to the point so as to change the continuum to a discontiuum. The crack speed is naturally obtained from the criterion. It is found that this method is more accurate and converges faster than the classical meshless methods which are based on the visibility concept. In this paper, several well-known static and dynamic problems were solved to verify the method.