• 센서학회지
• /
• 제8권5호
• /
• pp.359-367
• /
• 1999

CsI에 lithium을 활성제로 0.02, 0.1, 0.2 및 0.3 mole% 첨가한 CsI(Li) 단결정을 Czochralski 방법으로 육성하였다. 육성한 CsI(Li) 단결정의 격자구조는 bcc구조였으며, 격자상수 $a_o$ 값은 $4.568\;{\AA}$이었다. CsI(Li) 단결정의 흡수단은 245 nm이였으며, 흡수단으로 여기 시킨 발광스펙트럼의 파장범위는 $300{\sim}600\;nm$이었고 중심파장은 425 nm이었다. Li 농도를 0.2 mole% 첨가한 경우 에너지 분해능은 $^{137}Cs$(662 keV)에 대해서는 14.5%, $^{54}Mn$(835 keV)에 대해서는 11.4%이었고 $^{22}Na$의 511 keV와 1275 keV에 대한 에너지 분해능은 각각 17.7%와 7.9% 이었다. 그리고, $\gamma$선 에너지와 에너지 분해능 사이의 관계식은 ln (FWHM%) = -0.893lnE + 8.456이였으며, 에너지 교정곡선은 ${\log}E_r=1.455\;{\log}(ch.)-1.277$이었다. Li를 0.2 mole% 첨가한 CsI(Li) 단결정의 인광감쇠시간은 실온에서 0.51 s이었고, 일정비율 시간분석법(CFT:constant-fraction timing method)으로 측정한 시간분해능은 9.0 ns 이었다.

• 식물병연구
• /
• 제30권3호
• /
• pp.256-267
• /
• 2024

과수 화상병 꽃감염 방제를 위한 농용 항생제 살포 적기를 알려주고, 병징 출현을 예측해 현장 모니터링 시기 판단을 돕는 K-Maryblyt 예측모델을 정보시스템에서 자동으로 구동하는 FBcastS을 클라우드 컴퓨팅 환경에서 개발하였다. 4개의 단위 시스템으로 구성된 FBcastS 정보시스템은 기상자료 획득 및 처리, K-Maryblyt 모델 구동, 웹 정보 서비스 그리고 방제 적기 알림 발송의 기능별로 구성하였다. 기상자료 획득 단위 시스템은 우리나라 1,583지점의 관측기상과 예보기상을 수집할 뿐만 아니라 이들 중 과수원에서 직접 관측한 761지점의 기상자료에 대한 품질관리와 입력 자료변환 등 후처리를 수행한다. 모델 구동 단위 시스템은 K-Maryblyt 예측모델을 구동하고 그 결과를 database에 저장한다. 웹 서비스 단위 시스템은 인터넷 웹 기반으로 기상 모니터링 서비스, 과수 화상병 예측정보 모바일 서비스 그리고 전국 화상병 예측정보 모니터링 서비스를 표출한다. 마지막으로 알림 발송 단위 시스템은 농촌진흥청 화상병 예찰 및 방제 지침에 따라 K-Maryblyt 모델의 예측정보와 현장의 상황을 참고해 방제 적기 알림을 재배자들에게 전달한다. FBcastS은 4.25 km 공간간격의 조밀한 우리나라 기상관측망에서 수집한 기상정보를 활용하여 화상병 예찰 정보의 신뢰를 높일 수 있고, 인터넷 웹 기반 서비스를 제공함으로써 정보의 접근성과 활용성이 높은 클라우드 기반 스마트 농업 정보시스템이다.

• 전자공학회논문지
• /
• 제51권8호
• /
• pp.156-164
• /
• 2014

Field programmable gate array 기반 시간-디지털 변환기(Time to Digital Converter)로 가장 널리 사용되는 딜레이 라인(tapped delay line) 방식은 딜레이 라인의 길이가 길어지면 정확도가 떨어지는 단점이 있다. 이에 본 논문에서는 동일한 시간 해상도를 가지면서 딜레이 라인의 길이를 줄일 수 있도록 4 위상 클럭을 사용하고 이중 상태 판별 제어부를 가지는 시간-디지털 변환기 구조를 제안한다. 4 위상 클럭 별로 딜레이 라인 구성 시 발생하는 라인 간 딜레이 오차를 줄이기 위해 입력신호와 가장 가까운 클럭과의 시간 차이만 하나의 딜레이 라인으로 측정하고 어떤 위상 클럭이 사용되었는지를 판별하는 구조를 가졌다. 또한 싱크로나이저 대신 이중 상태 측정 state machine을 이용하여 메타스태이블을 판별함으로써, 싱크로나이저로 인한 딜레이 라인의 증가를 억제하였다. 제안한 시간-디지털 변환기(TDC)의 성능 측정 결과 1 ms의 측정 시간 범위에 대해 평균 분해능 22 ps, 최대 표준편차 90 ps을 가지며 비선형성은 25 ps였다.

• 수산해양기술연구
• /
• 제56권3호
• /
• pp.230-237
• /
• 2020

In order to design a diesel engine system and predict its performance, it is necessary to analyze the gas flow of the intake and exhaust system. A gas flow analysis in three-dimensional (3D) format needs a high-resolution workstation and enormous time for analysis. Therefore, the method of characteristics (MOC) was used for a gas flow analysis with a fast calculation time and a low-resolution workstation. An experiment was conducted on a single cylinder diesel engine to measure pressure in cylinder, intake pipe and exhaust pipe. The one-dimensional (1D) gas flow was analyzed under the same conditions as the experiment. The engine speed, valve timing and compression ratio were the same conditions and the intake pressure was inputted as the experimental results. Bent pipe such as an exhaust port that cannot be realized in 1D was omitted. As results of validation, the cylinder pressure showed accuracy, but the exhaust pipe pressure exhibited inaccuracy. This is considered as an error caused by the failure to implement a bent pipe such as an exhaust port. When analyzed in 3D, calculation time required 61 hours more based on a model of this study. In the future, we intend to implement a bent pipe that cannot be realized in 1D using 3D and prepare a method to supplement reliability by using 1D-3D coupling.

• 대한전자공학회논문지SD
• /
• 제46권11호
• /
• pp.40-47
• /
• 2009

본 논문에서는 mixed driving 방식을 이용하고 이미지 개선을 위해 $\gamma$-correction을 수행하는 QVGA급 TFT-LCD driver IC의 Source Driver를 설계한다. 240 RGB ${\times}$ 320 dots resolution을 가진 source driver는 720개의 채널을 통해 TFT-LCD 패널을 구동하고 18-bit의 RGB 데이터를 사용하여 26만 color를 수행한다. Mixed driving 방식은 종전의 좋은 구동력을 가진 channel amp. driving 방식에 저면적이 가능한 gray amp. driving 방식을 혼합한 방식으로서, 영상이 동일 색상을 가지는 worst case를 감지하여 구동력을 높여주는 방식을 사용함으로써 적절한 구동력과 저면적을 구현하는 설계방식이다. 본 Source Driver는 $0.35{\mu}m$ Magnachip embedded DRAM 공정을 사용하여 설계하였으며 Hspice를 사용하여 시뮬레이션을 하였다. 실험결과, 기존의 gayscale driving 방식에서는 hsync time을 만족시키지 못하는데 비해 $17{\mu}s$의 channel 구동시간으로 충분한 timing margin을 가지고 액정 channel 을 구동할 수 있으면서, 구동 앰프 78개와 제어회로를 갖는 저면적으로 설계되었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.130-133
• /
• 2007

In order to get high quality and high resolution image data from the space-borne camera system, the image chain from the sensor to the user in the ground-station need to be designed and controlled with extreme care. The behavior of the camera system needs to be controlled by ground commands to support on-orbit calibration and to adjust imaging parameters and to perform early stage on-orbit image correction, like gain and offset control, non-uniformity correction, etc. The operation status including the temperature of the sensor needs to be transferred to the ground-station. The preparation time of the camera system for imaging with specific parameters should be minimized. The camera controller needs to synchronize the operation of cameras for every channel and for every spectral band. Detail timing information of the image data needs to be provided for image data correction at ground-station. In this paper, the design of the camera controller for the AEISS on KOMPSAT-3 will be introduced. It will be described how the image chain is controlled and which imaging parameters are to be adjusted The camera controller will have software for the flexible operation of the camera by the ground-station operators and it can be reconfigured by ground commands. A simple concept of the camera operations and the design of the camera controller, not only with hardware but also with controller software are to be introduced in this paper.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2364-2370
• /
• 2021

The ⁿMCP (Neutron sensitive microchannel plate) combined with advanced readout electronics is widely used in energy selective neutron imaging because of its good spatial and timing resolution. Neutron detection efficiency is a crucial parameter for the ⁿMCP. In this paper, a mathematical model based on the oblique cylindrical channel and elliptical pore was established to calculate the neutron absorption probability, the escape probability of charged particles and overall detection efficiency of ⁿMCP and analyze the effects of neutron incident position, pore diameter, wall thickness and bias angle. It was shown that when the doping concentration of the ⁿMCP was 10 mol%, the thickness of ⁿMCP was 0.6 mm, the detection efficiency could reach maximum value, about 24% for thermal neutrons if the pore diameter was 6 ㎛, the wall thickness was 2 ㎛ and the bias angle was 3 or 6°. The calculated results are of great significance for evaluating the detection efficiency of the ⁿMCP. In a subsequent companion paper, the mathematical model would be extended to the case of the spatial resolution and detection efficiency optimization of the coating ⁿMCP.

• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• 제61권12호
• /
• pp.658-662
• /
• 2018

Background and Objectives The early assessment of treatment is not done for benign paroxysmal positional vertigo (BPPV) since the well-known phenomenon of fatigability after a repeated positional test can mimic successful treatment. The aim of this study is to evaluate the clinical implication of 'fatigability' after Epley maneuver and to identify the therapeutic efficacy of Epley maneuver in posterior canal BPPV (PC-BPPV). Subjects and Method This study was prospectively conducted by two dizziness clinics on 51 consecutive patients diagnosed with PC-BPPV. All patients included in the study received Epley maneuver treatment. The therapeutic results were reassessed immediately after a single trial of Epley maneuver. After 30 minutes, results were reassessed repeatedly to confirm the fatigability of diagnostic procedure immediately after treatment. If the treatment was not successful after 30 minutes, Epley maneuver was repeatedly performed until complete resolution. Results Immediately after the first maneuver, 45 of 51 (88.2%) patients had neither vertigo nor nystagmus during the positional test. All patients demonstrated complete resolution after receiving one to three Epley maneuvers on the day of diagnosis. 'Fatigability (false negative result)' was confirmed for only one case (1 of 6 patients, 16.7%), in which nystagmus was observed after 30 minutes but not identified immediately after the first Epley maneuver. Conclusion The therapeutic efficacy of Epley maneuver is very high in PC-BPPV. Considering the possibility of fatigability when reassessment is performed immediately after therapeutic maneuver, clinicians should avoid assessing the outcome immediately after treatment in patients with PC-BPPV.

• ETRI Journal
• /
• 제30권1호
• /
• pp.59-67
• /
• 2008

The necessity for the precise time synchronization of measurement data from multiple sensors is widely recognized in the field of global positioning system/inertial navigation system (GPS/INS) integration. Having precise time synchronization is critical for achieving high data fusion performance. The limitations and advantages of various time synchronization scenarios and existing solutions are investigated in this paper. A criterion for evaluating synchronization accuracy requirements is derived on the basis of a comparison of the Kalman filter innovation series and the platform dynamics. An innovative time synchronization solution using a counter and two latching registers is proposed. The proposed solution has been implemented with off-the-shelf components and tested. The resolution and accuracy analysis shows that the proposed solution can achieve a time synchronization accuracy of 0.1 ms if INS can provide a hard-wired timing signal. A synchronization accuracy of 2 ms was achieved when the test system was used to synchronize a low-grade micro-electromechanical inertial measurement unit (IMU), which has only an RS-232 data output interface.

• 제어로봇시스템학회논문지
• /
• 제17권1호
• /
• pp.38-46
• /
• 2011

The OPRoS (Open Platform for Robotic Service) framework provides uniform operating environment for service robots. As an OPRoS-based service robot has to support real-time as well as non-real-time applications, application of Windows NT kernel based operating system can be restrictive. On the other hand, various benefits such as rich library and device support and abundant developer pool can be enjoyed when service robots are built on Windows NT. The paper presents a user-mode component scheduler of OPRoS, which can provide near real-time scheduling service on Windows NT based on the restricted real-time features of Windows NT kernel. The component scheduler thread with the highest real-time priority in Windows NT system acquires CPU control. And then the component scheduler suspends and resumes each periodic component executors based on its priority and precedence dependency so that the component executors are scheduled in the preemptive manner. We show experiment analysis on the performance limitations of the proposed scheduling technique. The analysis and experimental results show that the proposed scheduler guarantees highly reliable timing down to the resolution of 10ms.