Journal of the Korea Organic Resources Recycling Association
/
v.14
no.4
/
pp.113-120
/
2006
Wastewater generated through the food waste recycling process have known high concentration, BOD 20,000~150,000 mg/L, which has to treat to the proper level because of a ban on reclamation. But it is impossible to treat less than 10 days by existing water treatment plant. Ecodays Ltd. is to treat this wastewater during 2~4 days by ER-1, which can simultaneously induce the modified PFR(Plug Flow Reactor) of the oxygen transfer rate, MLVSS concentration, and influent concentration to top from bottom of reactor. We tested the pilot test about low concentration food wastewater(BOD 16,500 mg/L) and high concentration food wastewater(64,431 mg/L) at the food waste recycling plant of H-Gun(20t/d). Hydraulic retention time(HRT) of ER-1 for low concentration food wastewater is 2.5day. In low concentration conditions, ER-1 treatment efficiency is to appear BOD 99%, COD 98%, TN 97%, and TP 96%. While ER-1 process for high concentration food wastewater treatment is composed 2 stages, which are to be HRT 2.5day for law wastewater and HRT 1.5 day for secondary treatment. In high concentration conditions, ER-1 treatment efficiency is to appear BOD 97%, COD 84%, TN 66%, and TP 95%. It is treated without temperature control about high temperature($50^{\circ}C$) to appear low treatment efficiency in high concentration conditions.
Buckwheat has been a popular favorite food crop in Korea for a long time. The objective of the study was to investigate the effects of climatic conditions and cultural methods on grain yields of summer buckwheat variety Sinnong 1 planted during the spring season in Suwon, Korea from 1989 to 1991. Frost minimum temperature of late April was -0.3$^{\circ}C$ in 1990 being very low as compared with 3.7$^{\circ}C$ of the normal year, and affected early growth of the seedlings emerging from the soil surface. In late May of 1990, the frost minimum temperature was 7.3$^{\circ}C$ being low as compared with 8.8$^{\circ}C$ of the normal year, and also induced cold injury to fertilization and grain filling. Total precipitation 374.5mm of mid and late June, 1990 provided serious damage to the grain filling and maturing buckwheat seeds and along with causing seed sprouting before harvest. However, the climates of 1989 and 1991 were very good for the growth and development of spring-sown buckwheats. When summer buckwheat cultivar Sinnong 1 was planted on April 20, 1989, its highest grain yields 268-292kg /10a were harvested from the plots of seeding rate 8kg /10a, drill seeding and polyethylene film mulching, and the mean grain yield of the plots was 238kg /10a in 1989, but 64.3kg in Suwon, and 40.2kg /10a in Muan in 1990. In 1991 maximum grain yield 277kg /10a was produced from the April 15 planted and vinyl-mulched plot, and 255kg /10a from the April 25 planted and non-mulched plot. Herbicide Alachlor-sprayed plots produced lower grain yields than no weed control and manual weeding plots. Mechanized drill-seeding saved 83~84% in planting hours as compared with manual broadcasting 21.6 hours /ha, and produced 9% more in grain yields from the two-season croppings of mechanized drill-seeding culture being 364kg /10a in total yields per year.
Verfondern, Karl;Nabielek, Heinz;Kendall, James M.
Nuclear Engineering and Technology
/
v.39
no.5
/
pp.603-616
/
2007
Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.
Stream inflows induced by flood runoffs have a higher density than the ambient reservoir water because of a lower water temperature and elevated suspended sediment(SS) concentration. As the propagation of density currents that formed by density difference between inflow and ambient water affects reservoir water quality and ecosystem, an understanding of reservoir density current is essential for an optimization of filed monitoring, analysis and forecast of SS and nutrient transport, and their proper management and control. This study was aimed to quantify the characteristics of inflow density current including plunge depth($d_p$) and distance($X_p$), separation depth($d_s$), interflow thickness($h_i$), arrival time to dam($t_a$), reduction ratio(${\beta}$) of SS contained stream inflow for different flood magnitude in Daecheong Reservoir with a validated two-dimensional(2D) numerical model. 10 different flood scenarios corresponding to inflow densimetric Froude number($Fr_i$) range from 0.920 to 9.205 were set up based on the hydrograph obtained from June 13 to July 3, 2004. A fully developed stratification condition was assumed as an initial water temperature profile. Higher $Fr_i$(inertia-to-buoyancy ratio) resulted in a greater $d_p,\;X_p,\;d_s,\;h_i$, and faster propagation of interflow, while the effect of reservoir geometry on these characteristics was significant. The Hebbert equation that estimates $d_p$ assuming steady-state flow condition with triangular cross section substantially over-estimated the $d_p$ because it does not consider the spatial variation of reservoir geometry and water surface changes during flood events. The ${\beta}$ values between inflow and dam sites were decreased as $Fr_i$ increased, but reversed after $Fr_i$>9.0 because of turbulent mixing effect. The results provides a practical and effective prediction measures for reservoir operators to first capture the behavior of turbidity inflow.
Journal of the Korean Society of Food Science and Nutrition
/
v.32
no.2
/
pp.230-237
/
2003
For hygenic evaluation, microbiological tests of seasoned raw vegetal)les from five high school foodservice operations were conducted. The antimicrobiological effect of pre-preparation with vinegar against microorganisms on vegetables in foodservice operations was also investigated. Total plate counts of leek gukgalli, broad bellflower saengchae and vegetable salad ranged from 10$^4$ CFU/g to 10$^{6}$ CFU/g. Coliform levels of those ranged from 10$^2$CFU/g to 10$^4$ CFU/g. Leek washed three times was pre-prepared at different concentration (0.05%,0.1%,0.5%,1% and 2%) and temperature ( 1$0^{\circ}C$ 2$0^{\circ}C$ and 4$0^{\circ}C$) for 5, 10 and 30 minutes. The higher the concentration and temperature of vinegar were, the more the antimicrobiological activity increased. The sanitizing activity of vinegar increased with treatment time. Considering the quality of vegetable and the expense, when the levels of total plate counts and coliform of vegetable were 10$^{6}$ and 10$^3$ CFU/g, pre-preparation with 0.5% of vinegar at 2$0^{\circ}C$ for 10 minutes was best. The population of total plate count and coliform on row and leek washed three times increased during storage for 72 hours. However, The levels of microorganism on leek samples pre-prepared with 0.5% and 1% vinegar decreased during storage. After the treatment of vinegar at 1$0^{\circ}C$ for 10 minutes, Staphylocucus aureus, Escherichia coli O157, Shigella sonnei, Salmonella entritidis, Listeria monolytogenes were not detected.
The experiment was carried out to obtain basic informations on sod culture using water foxtail in apple orchard at Kyeongbuk Provincial RDA in 1996 to 1997. Period of seedling emergence varied with sowing time and accumulative temperature. Sowing at Nov. 25 required longer than 100 days, while it needed only 8 days when water foxtail was sowed at Sep. 20. In a view of accumulative temperature, sowing at March 15 needed $139^{\circ}C$ but it required about $1,000^{\circ}C$ at August 10. This result showed that the seed of water foxtail has strong summer-dormancy in natural condition. Water foxtail had s-shape growth curve during growing season, and growth rate was the highest from March to May in this period. Plant height increased 2 times and 4 times for dry weight from March 20 to April 20. However, growth was decreased by summer depression after May. Major weeds in apple orchard were horseweed, akino-nogeshi and shepherd's-purse. These species were suppressed by the dominance of water foxtail. Water foxtail as a cover plant could be used for a method of weed control instead of herbicide in apple orchard.
Magazine of the Korean Society of Agricultural Engineers
/
v.12
no.2
/
pp.1937-1947
/
1970
This experiment was conducted, making use of the 'NONG-RIM No, 6' a recommended variety of rice plant for the year of 1969. Main purpose of the experiment are to explore possibilities of; a) ways and means of saving irrigation water and, b) overcoming drought at the same time so that an increaded yield in rice production could be resulted in Specifically, it was tried to determine the effects of the Rotation Irrigation method combined with differentiated thickess of Lining upon the growth and Yield of rice production. Some of the major finding are summarized in the follows. 1) The Different thicknesses show a significant relationship with the weight of 1000 grains. In the case of 3cm Lined plot, the grain weight is 39.0 Grams, the heaviest. Next in order is 6 cm lined plnt, 5 day control plot, 6 day control plot. 2) In rice yield, it is found that there is a considerably moderate signicant relationship with both the different thickness of lining and the number of irrgation, as shown in the table No,7. 3) There is little or no difference among different plot in terms of; a) physical and chemical properties of soil, b) quality of irrgation water, c) climatic condition, and rainfalls. 4) It is found that there is no significant relationship between differences in the method of rotation irrgation and the number of ears per hill because of too much rainydays and low temperature during irrigation season. 5) In uyny1-treated plots, it is shown that there is on difference among different plots, but the irrigation water requirement saved as much as 1/2 to actual irrigation water compare to uncontroled plot. 6) The irrigation water requirement for 48 days is saved as much 67% compared to uncontroled plot, the order are; the 9cm lined plot, the plot of vinyl with no hole, the plot with a hole of $1cm/m^2$ as shows in fig 15. 7) The rate of percolation of 40-30mm/day is decreased to 30-20/day. It is found that the decreasad rate of percolation due to vinyl-cutoff in footpath. 8) The growing condition was fine, and there was no found that decease and lageing as always submerged plot. 9) It is found that it must be constructed irrigation and drainage system, inlet and outlet perpect, respectly, of which could be irrigation water saved and would be inereased the irrigation water temperature.
Sohn, Sea Hwan;Jang, In Surk;An, Young Sook;Moon, Yang Soo
Korean Journal of Poultry Science
/
v.42
no.1
/
pp.51-59
/
2015
Chickens are exposed to the external and internal stressors such as low and high temperature, high stocking density, feed restriction and disease. There have been a few studies on gene expressions through the investigation of chickens under direct exposure to the stress of high stocking density. The objective of the present study was to determine the expressions of genes associated with stress, endoplasmic reticulum (ER)-stress, lipid and glucose metabolism in two strains of chickens, Korean Native Chicken (KNC) and White Leghorn (WL), raised in high stocking density. A total of 164 chickens aged 40 weeks were randomly allotted to a $540cm^2/bird$ stocking density (control), whereas the chickens in a high density group were assigned in a $311cm^2/bird$ stocking density with feeding ad libitum for 10 weeks. Total RNA was extracted from the live for qRT-PCR. The expression levels of hsp70 and $hsp90{\alpha}$ were higher in WL subjected to stress with high stocking density compared with those genes in control (P<0.05), while the expressions of genes were not affected in KNC. ER stress marker gene XBP1 was also highly expressed in WL with stress (P<0.05), but the stress of high stocking density did not influence to ER stress marker genes in KNC. Lipid metabolism associated genes including FABP4, FATP1 and ACSL1 were highly expressed in WL compared with KNC when subjected to high stocking density stress (P<0.05). The expression of glucose transport gene GLUT2 and GLUT8 were increased in chickens exposured to the stress of high stocking density (P<0.05). The data indicate that WL is more sensitive to the stress of high stocking density compared with KNC and the stress may influence the modulation of lipid and glucose metabolism in the liver of chickens.
Journal of the Korea Institute of Building Construction
/
v.9
no.5
/
pp.79-86
/
2009
In a steel structure, spray-applied fire resistive materials are crucial in preventing structural strength from being weakened in the event of a fire. The quality control of such materials, however, is difficult for manual workers, who can frequently be in short supply. These skilled workers are also very likely to be exposed to environmental hazards. Problems with construction work such as this, which are specifically the difficulty of achieving quality control and the dangerous nature of the work itself, can be solved to some degree by the introduction of automated equipment. It is, however, very difficult to automate the work process, from operation to the selection of a location for the equipment, as the environment of a construction site has not yet been structured to accommodate automation. This is a fundamental study on the possibility of the automation of spray-applied fire resistive coating work. In this study, the linkability of the cutting-edge RTLS to an automation system is reviewed, and a scenario for the automation of spray-applied fire resistive coating work and system composition is presented. The system suggested in this study is still in a conceptual stage, and as such, there are many restrictions still to be resolved. Despite this fact, automation is expected to have good effectiveness in terms of preventing fire from spreading by maintaining a certain level of strength at a high temperature when a fire occurs, as it maintains the thickness of the fire-resistive coating at a specified level, and secures the integrity of the coating with the steel structure, thereby enhancing the fire-resistive performance. It also expected that if future research is conducted in this area in relation to a cutting-edge monitoring TRS, such as the ubiquitous sensor network (USN) and/or building information model (BIM), it will contribute to raising the level of construction automation in Korea, reducing costs through the systematic and efficient management of construction resources, shortening construction periods, and implementing more precise construction
Kim, Jin A;Kim, Jung Sun;Hong, Joon Ki;Lee, Yeon-Hee;Lee, Soo In;Jeong, Mi-Jeong
Journal of Plant Biotechnology
/
v.44
no.4
/
pp.438-447
/
2017
Flowering is one of the most important development traits related to the production of Brassica rapa crops. After planting, a sudden low temperature triggers premature flowering, which leads to a reduction in the yield and quality of harvested production. Therefore, understanding the mechanism of flowering control is important in the agricultural productivity for preventing Brassica rapa crops. Vernalization is generally known as the main factor of flowering in the Brassica plant. However, in the subspecies of Brassica rapa, some accession such as Yellow sarson and Komatsuna display the flowering phenotype without vernalization. Circadian genes, which diurnally regulate plant physiology, have a role for photoperiodic flowering but are related to the regulation of the vernalizarion mechanism. In this report, the 22 B. rapa accession were divided into two groups, vernalization and non-vernalization, and the sequenced circadian gene, BrPRR1s. Among them, the BrPRR1b gene was found to have deletion regions, which could classify the two groups. The PCR primer was designed to amplify a short band of 422bp in the vernalization type and a long band of 451bp in the non-vernalization type. This primer set was applied to distinguish the flowering types in the 43 B. rapa accession and 4 Brassica genus crop, Broccoli, cabbage, mustard, and rape. The PCR analysis results and flowering time information of each crop demonstrated that the primer set can be used as marker to discern the flowering type in Brassica crops. This marker system can be applied to the B. rapa breeding when selecting the flowering character of new progenies or introducing varieties at an early stage. In addition, these results displayed that the circadian clock genes can be a good strategy for the flowering control of B. rapa crops.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.