• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.12
• /
• pp.1183-1187
• /
• 2011

In this paper, an optimal FIR (Finite-Impulse-Response) filter is proposed for discrete time-varying state-space models. The proposed filter estimates the current state using measured output samples on the recent time horizon so that the variance of the estimation error is minimized. It is designed to be linear, unbiased, with an FIR structure, and is independent of any state information. Due to its FIR structure, the proposed filter is believed to be robust for modeling uncertainty or numerical errors than other IIR filters, such as the Kalman filter. For a general system with system and measurement noise, the proposed filter is derived without any artificial assumptions such as the nonsingular assumption of the system matrix A and any infinite covariance of the initial state. A numerical example show that the proposed FIR filter has better performance than the Kalman filter based on the IIR (Infinite- Impulse-Response) structure when modeling uncertainties exist.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.308-313
• /
• 2003

Thermal mass flow meters (TMFMs) are most widely used for measuring mass flow rates in the semiconductor industry. A TMFM should have a short response time in order to measure the time-varying flow rate rapidly and accurately. Therefore it is important to study transient heat transfer phenomena in the sensor tube of a TMFM that is the most critical part in the TMFM. In the present work, a simple numerical model for transient heat transfer phenomena of the sensor tube of a TMFM is presented. Numerical solutions for the tube and fluid temperatures in a transient state are obtained using the proposed model and compared with experimental results to validate the proposed model. Based on numerical solutions, heat transfer mechanism in a transient state in the sensor tube is explained. Finally, a correlation for predicting the response time of a sensor tube is presented. The correlation is verified by experimental results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.536-540
• /
• 2004

A novel nematic liquid crystal (LC) cell with splay structure exhibiting wide viewing angle, fast response time and high transmittance at the same time has been developed. With rubbed homeotropic alignment in parallel directions, the device shows bend alignment in the absence of vertical electric field. However, with applied high voltage in a pulse form, the LC shows a optically compensated splay (OCS) orientation such that the mid-director is parallel to a substrate and at both surfaces the LCs are aligned vertically in parallel direction. In the device, the birefringence of the cell becomes tunable with applying voltage, i.e., the amount of light passed through the cell can be controlled by controlling the orientation of the LC. Since the OCS cell has a self-compensation structure such that the LC has a mirror symmetry along the mid-director, the device shows a wide viewing angle with only a single domain and a fast response time.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.827-830
• /
• 2011

The equation of motion for the piping system conveying harmonically pulsating fluid is presented. When pulsating fluid flows, the properties of this system like mass, stiffness and damp is changing according to fluid fluctuation. To solve the steady-state time response of this system, numerical integration method of differential equation was usually used. But this method has some problem such time consuming method and difficulty of converging. Therefore this research suggests reliable and efficient numerical method to solve steady-state time response of piping system by using displacement assumption method.

• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.21-28
• /
• 1990

In this paper, the capacity of system which provides the real time response call service to the customer is studied. The quality of call service depends on the response time of the service in the system. Therefore, the focus of this paper is to investigate the capacity of system under the restriction of response time. In this paper, the system is modeled by queueing network. The analytical method is applied to solve this queueing network. The solution of the model has product form solution. To get the reasonable capacities, nonlinear programming problem is formulated and is solved by GINO.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.499-501
• /
• 2005

One of representative techniques for compensation of LC's slow response characteristic is the Response Time Acceleration (RTA) technique. The conventional data definition for the RTA is based on the manual measurement and thus it takes long time. Therefore it is almost impossible to use panel specific compensation data in MP line. We have developed a new automated measurement system and flicker minimization for this purpose, which could achieve dramatic measurement time reduction, consistency over different operator, and optimized values as well. This system laid the groundwork for the application of image quality enhancement technologies to panels individually, and using this system, we can expect very uniform image quality for all LCD panels.

• Journal of Information Display
• /
• v.11 no.2
• /
• pp.57-62
• /
• 2010

A method of characterizing time-sequential stereoscopic 3D displays based on the measurement of the temporal behavior of the systems vs. the grey levels is proposed. An Nvidia 3D vision kit with a 3D-ready SAMSUNG 2233RZ LCD display is characterized in the paper. OPTISCOPE SA especially designed for the precise measurements of the luminance and temporal behavior of LCD displays was used. The transmittance and response time of the shutter glasses was first evaluated. Then the grey-to-grey response times of the display were measured. The 2D and 3D behaviors of the display were then compared. Finally, the temporal behavior of the complete system was modeled, and the grey-level variations on one view were deduced as a function of the synchronization and level of the other eye. The main sources of imperfection were identified and quantified, and a full computation of the system performances was done.

• Journal of Digital Convergence
• /
• v.3 no.1
• /
• pp.149-163
• /
• 2005

Researches for NN(nearest neighbor) query which is often used in LBS system, have been worked. However. Conventional NN query processing techniques are usually meaningless in moving object management system for LBS since their results may be invalidated as soon as the query and data objects move. To solve these problems, in this paper we propose a new nearest neighbor query processing technique, called CTNN, which is possible to meet continuous trajectory nearest neighbor query processing. The proposed technique consists of Approximate CTNN technique which has quick response time, and Exact CTNN technique which makes it possible to search accurately nearest neighbor objects. Experimental results using GSTD datasets shows that the Exact CTNN technique has high accuracy, but has a little low performance for response time. They also shows that the Approximate CTNN technique has low accuracy comparing with the Exact CTNN, but has high response time.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.835-838
• /
• 2000

A new photo-alignment material, copoly (PM4Ch-ChMA), copoly (poly (4-methacryloyloxy) chalcone-cholesterol methacrylate) was synthesized and the electro-optical (EO) characteristics for the photo-aligned vertical-aligned (VA)-LC display (LCD) were studied. Good voltage-transmittance (V-T) and response time characteristics for the photo-aligned VA-LCD with polarized UV exposure on the copolymer-1 (2%) surfaces for 1 min. were observed. EO performance for the photo-aligned VA-LCD decreased with increasing UV exposure time on a copolymer surface. Also, excellent V-T and response time characteristics for the photo-aligned VA-LCD with UV exposure on copolymer-2 and copolymer-3 surfaces for 3min. can be achieved.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.1
• /
• pp.1-13
• /
• 2006

This paper presents the problems of designing low-order controller for a linear time-invariant(LTI) system in parameter space, wherein both transient response requirements and stability shall be considered in the same space. For a LTI system, we, (1) develop a method determining the existence of low-order stabilizers of the first-order and PID structures, (2) develop an algorithm of finding such a stabilizing region. (3) Both procedures are carried out by means of a parametric approach in the same frame work. This leads to easily obtain a subset of controller gains from the stabilizing set, that meet good time response requirements. It is illustrated by examples.