• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.87-93
• /
• 2010

This paper presents a high resolution, wide input range 2-step time-to-digital converter used in digital PLL. TDC is used to compare the DPLL output frequency with reference frequency and should be implemented with high resolution to improve the phase noise of DPLL. The conventional TDC consists of delay line realized inverters, whose resolution is determined by delay time of inverter and transistor size, resulting in limited resolution. In this paper, 2-step TDC with phase-interpolation and Time Amplifier is proposed to meet the high resolution and wide input range by implement the delay time less than an inverter delay. The gain of Time Amplifier is improved by using the delay time difference between two inverters. It is implemented in $0.13{\mu}m$ CMOS process and the die area is $800{\mu}m{\times}850{\mu}m$ Current consumption is 12 mA at the supply voltage of 1.2 V. The resolution and input range of the proposed TDC are 0.357 ps and 200 ps, respectively.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.11
• /
• pp.527-536
• /
• 2017

With the recent development of smart grid industry, the necessity for efficient EMS(Energy Management System) has been increased. In particular, in order to reduce electric load and energy cost, sophisticated electric load forecasting and efficient smart grid operation strategy are required. In this paper, for more accurate electric load forecasting, we extend the data collected at demand time into high time resolution and construct an artificial neural network-based forecasting model appropriate for the high time resolution data. Furthermore, to improve the accuracy of electric load forecasting, time series data of sequence form are transformed into continuous data of two-dimensional space to solve that problem that machine learning methods cannot reflect the periodicity of time series data. In addition, to consider external factors such as temperature and humidity in accordance with the time resolution, we estimate their value at the time resolution using linear interpolation method. Finally, we apply the PCA(Principal Component Analysis) algorithm to the feature vector composed of external factors to remove data which have little correlation with the power data. Finally, we perform the evaluation of our model through 5-fold cross-validation. The results show that forecasting based on higher time resolution improve the accuracy and the best error rate of 3.71% was achieved at the 3-min resolution.

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.33-45
• /
• 2002

It was necessary to devise new techniques to overcome and enhance the resolution limits of traveltime tomography. Waveform inversion has been one of the methods for giving very high resolution result. High resolution image could be acquired because waveform inversion used not only phase but amplitude. But waveform inversion was much time consuming Job because forward and backward modeling was needed at each iteration step. Velocity-stress method was used for effective modeling. Resolution limits of imaging methods such as travel time inversion, acoustic and elastic waveform inversion were investigated with numerical models. it was investigated that Resolution limit of waveform inversion was similar tn resolution limit of migration derived by Schuster. Horizontal resolution limit could be improved with increased coverage by adding VSP data in cross hole that had insufficient coverage. Also, waveform inversion was applied to realistic models to evaluate applicability and using initial guess of travel time tomograms to reduce non-linearity of waveform inversion showed that the better reconstructed image could be acquired.

• Smart Structures and Systems
• /
• v.30 no.5
• /
• pp.513-520
• /
• 2022

During the long-time service of a bolt, its preload may suffer slight perturbations or significant reductions. It is a dilemma to monitor preload changes at high resolution and full scale. Approaches for bolt preload monitoring with multi-resolution should be developed. In this paper, a simple and effective multi-resolution bolt preload monitoring approach using ultrasonic guided waves (UGW) is proposed. A linear relationship between the time-of-flight (TOF) variation of multi-reflected waves and preload is derived to theoretically reveal the multi-resolution properties of UGW. The variations of TOF before and after the slight preload perturbations are extracted by using a global evaluation method. Experimental results show that the signal-to-noise ratio (SNR) of the 1^st, 2^nd, and 3^rd-reflected UGWs is larger than 20 dB. The resolution of the 2^nd-reflected UGW is higher than that of the 1^st-reflected UGW and lower than that of the 3^rd-reflected UGW. The ultimate detectable resolutions of bolt preload (DRBP) of the 1^st and 3^th-reflected UGWs are 0.9% and 0.5%, respectively. By using the 1^st and 3^th-reflected guided waves, the bolt looseness with different degrees can be monitored simultaneously.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.815-821
• /
• 2012

A CW Doppler radar can measure radial velocity of an object. It detects a Doppler frequency shift that is proportioned to radial velocity of a moving object. To detect a Doppler frequency shift, FFT(Fast Fourier Transform) is conducted. In this process, the time domain received signal is transformed to a frequency domain. A number of FFT affects not only the time resolution but also signal to noise ratio of received signal. So finally it is related with a radial velocity accuracy. Therefore in this paper, it is described the relation of time resolution and the radial velocity accuracy.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.55-58
• /
• 1989

The methods of recording transient phenomena with picosecond or better resolution fall into two basic categories: those in which the detector itself prossesses adequate time resolution for the task at hand, and those in which the response of the system is sampled by examining the characteristics of a second pulse ("the probe") delayed in time from the initiating pulse ("the pump") as a function of time delay between pump and probe cases. In this case the time resolution is only limited by the pump-and probe-pulse durations. As an application of this time-resolved spectroscopic technique, the ultrafast orientational relaxation phenomena of the dye molecules are currently under investigation in our laboratory. In this presentation the status of our experiment is summarized.iment is summarized.

• The Journal of Korea Robotics Society
• /
• v.13 no.4
• /
• pp.230-236
• /
• 2018

3D depth perception has played an important role in robotics, and many sensory methods have also proposed for it. As a photodetector for 3D sensing, single photon avalanche diode (SPAD) is suggested due to sensitivity and accuracy. We have researched for applying a SPAD chip in our fusion system of time-of-fight (ToF) sensor and stereo camera. Our goal is to upsample of SPAD resolution using RGB stereo camera. Currently, we have 64 x 32 resolution SPAD ToF Sensor, even though there are higher resolution depth sensors such as Kinect V2 and Cube-Eye. This may be a weak point of our system, however we exploit this gap using a transition of idea. A convolution neural network (CNN) is designed to upsample our low resolution depth map using the data of the higher resolution depth as label data. Then, the upsampled depth data using CNN and stereo camera depth data are fused using semi-global matching (SGM) algorithm. We proposed simplified fusion method created for the embedded system.

• ETRI Journal
• /
• v.44 no.1
• /
• pp.85-93
• /
• 2022

We propose an efficient method for synthesizing mesh-based realistic computer-generated hologram (CGH). In a previous nonanalytic mesh-based CGH synthesis, the angular spectrum of the two-dimensional (2D) plane is calculated using the fast Fourier transform (FFT) with the same size as the resolution of the final hologram. Because FFT increases the computation time as the size of the input matrix increases, the previous method has a problem: The higher the resolution of the hologram, the greater the computational load, thereby delaying synthesis time. In this study, when calculating the angular spectrum of the 2D plane in mesh-based CGH synthesis, we propose a method to calculate the angular spectrum by defining the 2D plane with an arbitrary size smaller than the resolution of the final hologram. The resolution adjustment method reduces the computation time and can be applied to occlusion culling and texturing for the realistic effect of mesh-based CGH. We describe the principle, error analysis, application of realistic effect, and experimental results of the proposed method.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2019

Thisstudy presentsthe development of a fast-time airport surface simulator. The simulator usesthe output from a first-come first-served (FCFS) scheduler and has adopted one-dimensional dynamic model to simulate the movement of the aircraft on the surface. Higher collision risks situations in the airport surface traffic are analyzed to classify those situations into six cases. A conflict detection and resolution algorithm is implemented to maintain separation distance and to prevent deadlock. The simulator was tested with a scenario at the Incheon International Airport that contains 72 aircraft. Without the conflict detection and resolution, various conflict situations are identified. When the conflict detection and resolution algorithm is managing the traffic, it is confirmed that the conflicts are removed at the price of additional delays. In the conflict resolution algorithm, three prioritization strategies are implemented, and delayed aircraft count and average additional delays are compared. Prioritization based on remaining time or distance showed smaller total additional delay compared to choosing minimum delay priority for each situation.

• Spatial Information Research
• /
• v.19 no.1
• /
• pp.29-40
• /
• 2011

GOCI the world first Ocean Color Imager in Geostationary Orbit, which could obtain total 8 images of the same region a day, however, its spatial resolution(500m) is not enough to use for the accurate land application, Super Resolution(SR), reconstructing the high resolution(HR) image from multiple low resolution(LR) images introduced by computer vision field. could be applied to the time-series remotely sensed images such as GOCI data, and the higher resolution image could be reconstructed from multiple images by the SR, and also the cloud masked area of images could be recovered. As the precedent study for developing the efficient SR method for GOCI images, on this research, it reproduced the simulated data under the acquisition process of the remote sensed data, and then the simulated images arc applied to the proposed algorithm. From the proposed algorithm result of the simulated data, it turned out that low resolution(LR) images could be registered in sub-pixel accuracy, and the reconstructed HR image including RMSE, PSNR, SSIM Index value compared with original HR image were 0.5763, 52.9183 db, 0.9486, could be obtained.