• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1063-1075
• /
• 2012

To locate an object accurately in the wireless sensor networks, the distance measure based on time-delay plays an important role. In this paper, we propose a maximum likelihood (ML) time-delay estimation algorithm in multi-path wireless propagation channel. We get the joint probability density function after sampling the frequency domain response of the multi-path channel, which could be obtained by the vector network analyzer. Based on the ML criterion, the time-delay values of different paths are estimated. Considering the ML function is non-linear with respect to the multi-path time-delays, we first obtain the coarse values of different paths using the subspace fitting algorithm, then take them as an initial point, and finally get the ML time-delay estimation values with the pattern searching optimization method. The simulation results show that although the ML estimation variance could not reach the Cramer-Rao lower bounds (CRLB), its performance is superior to that of subspace fitting algorithm, and could be seen as a fine algorithm.

• Environmental and Resource Economics Review
• /
• v.15 no.4
• /
• pp.673-692
• /
• 2006

In order to test for the dynamic optimality condition for the use of nonrenewable resource, it is necessary to estimate the shadow value of the resource in situ. In the previous literatures, a time series for in situ price has been derived either as the difference between marginal revenue and marginal cost or by differentiating with respect to the quantity of ore extracted the restricted cost function in which the quantity of ore is quasi-fixed. However, not only inconsistent estimates are likely to be generated due to the nonmalleability of capital, but the estimate of marginal revenue will be affected by market power. Since firms will likely fail to minimize the cost of the reproducible inputs subject to market prices under realistic circumstances where imperfect factor markets, strikes, or government regulations are present, the shadow in situ values obtained by estimating the restricted cost function can be biased. This paper provides a valid methodology for checking the dynamic optimality condition for a nonrenewable resource by using the input distance function. Our methodology has some advantages over previous ones: only data on quantities of inputs and outputs are required; nor is the maintained hypothesis of cost minimization required; adoption of linear programming enables us to circumvent autocorrelated errors problem caused by use of time series or panel data. The dynamic optimality condition for domestic coal mining does not hold for constant discount rates ranging from 2 to 20 percent over the period 1970~1993. The dynamic optimality condition also does not hold for variable rates ranging from fourth to four times the real interest rate.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.411-421
• /
• 2001

The generalized symmetry transform evaluates symmetry without segmentation and extracts regions of interest in an image by combining locality and reflectional symmetry The demand that the symmetry transform be local is reflected by the distance weight function. When calculating large regions-of-interest, we should select a large standard deviation of distance weight function. But such a large standard deviation makes the execution time increase in the second power of r, which is a radius of search area. In this paper we propose modified scan line based GST with selectively directional attention to improve time complexity The symmetry map of our proposed GST is found to be very similar to that of the existing GST. However the computation time of the proposed GST increases linearly with respect to r because our proposed GST evaluates symmetry between a pair of edge pixels along the scan lines. The GST computation decreases considerably when the proposed GST is peformed with selectively directional attention in case of large r. Several experiments in this paper demonstrate the time efficiency and the usefulness of our proposed GST.

• Journal of Korea Multimedia Society
• /
• v.11 no.4
• /
• pp.434-442
• /
• 2008

The parallel beam SPECT acquires projection data by using parallel hole collimators in conjunction with photon detectors. Those projection data of the parallel beam SPECT are, however, contaminated by the distance dependent blurring because of the inaccuracy of the point response function of the collimator that is used to define the range of directions where photons can be detected. Thus an efficient aperture correction is required. In this paper we propose a distance dependent backprojection method to overcome the time limitation of iterative aperture correction methods and the performance limitation of Fourier-Distance Relation based method. The proposed method achieves aperture correction and fast image reconstruction by replacing the distance independent backprojection of the direct image reconstruction with the distance dependent one. We conducted several simulations to compare the performance of the proposed method with that of the conventional Fourier-Distance Relation based method. The simulation result shows that the proposed method outperforms the Fourier-Distance Relation based method in spatial resolution and robustness against noise.

• Environmental and Resource Economics Review
• /
• v.30 no.4
• /
• pp.581-605
• /
• 2021

The purpose of this study is to provide basic data for improving energy efficiency by estimating the regional energy efficiency in Korea using the stochastic frontier approach beyond the energy intensity that has been traditionally used as an indicator of energy efficiency. In this paper, energy efficiency and energy intensity efficiency were estimated as a stochastic distance function from 1998 to 2018 for 16 cities and provinces in Korea. In addition, the robustness of energy efficiency according to the capital stock estimation methods which had been mixed in previous studies was reviewed. As a result of the analysis, there is a significant change in regional rankings according to the three energy efficiency indicators, so they should be used complementary to each other. Second, while the energy efficiency improved little by little over time, the energy intensity efficiency decreased slightly though. Lastly, energy efficiency by region according to the capital stock estimation method was not robust. Care must be taken in estimating capital stock, which is important in economic analysis.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.7
• /
• pp.33-41
• /
• 1994

A single channel adaptive noise canceling (ANC) technique with a recursive time delay estimator (RTDE) is presented for removing effects of additive noise on the speech signal. While the conventional method makes a reference signal for the adaptive filter using the pitch estimated on a frame basis from the input speech, the proposed method makes the reference signal using the delay estimated recursively on a sample-by-sample basis. As the RTDEs, the recursion formulae of autocorrelation function (ACF) and average magnitude difference function (AMDF) are derived. The normalized least mean square (NLMS) and recursive least square (RLS) algorithms are applied for adaptation of filter coefficients. Experimental results with noisy speech demonstrate that the proposed method improves the perceived speech quality as well as the signal-to-noise ratio and cepstral distance when compared with the conventional method.

• Journal of The Korean Astronomical Society
• /
• v.47 no.4
• /
• pp.137-145
• /
• 2014

The astrophysical parameters of four unstudied open star cluster candidates; Ivanov 2, 7, 9, and Harvard 9; are estimated for the first time using the PPMXL database. The stellar density distributions and color-magnitude diagrams for each cluster are used to determine the geometrical structure (cluster center, limited radius, core and tidal radii, the distances from the Sun, from the Galactic center and from the Galactic plane). Also, the main photometric parameters (age, distance modulus, color excesses, membership, total mass, relaxation time, luminosity and mass functions) are estimated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.1025-1031
• /
• 2001

In this paper, we derive the outage probability of cellular mobile system with STTB(Space Time Transmitter Diversity) scheme where the received radio signals and interferers experience Rayleigh fading and AWGN. The new probability density function of L independent identically distributed interferers is derived using Laplace transforms. We express the probability of outage as a function of the average-signal to average-interference power ratio and the signal to noise ratio. In addition, the frequency reuse distance which is one of the key parameters in the design of cellular systems is analyzed.

• Steel and Composite Structures
• /
• v.38 no.4
• /
• pp.447-462
• /
• 2021

In this work, we consider a problem in the context of thermoelectric materials with memory-dependent derivative for a half space which is assumed to have variable thermal conductivity depending on the temperature. The Lamé's modulii of the half space material is taken as a function of the vertical distance from the surface of the medium. The surface is traction free and subjected to a time dependent thermal shock. The problem was solved by using the Laplace transform method together with the perturbation technique. The obtained results are discussed and compared with the solution when Lamé's modulii are constants. Numerical results are computed and represented graphically for the temperature, displacement and stress distributions. Affectability investigation is performed to explore the thermal impacts of a kernel function and a time-delay parameter that are characteristic of memory dependent derivative heat transfer in the behavior of tissue temperature. The correlations are made with the results obtained in the case of the absence of memory-dependent derivative parameters.

• Journal of the Korea Computer Graphics Society
• /
• v.20 no.2
• /
• pp.13-24
• /
• 2014

In this study, a graphics-processing-unit (GPU)-based acceleration technique is proposed for the feature-based image morphing. This technique uses the depth-buffer of the graphics hardware to calculate efficiently the shortest distance between a pixel and the control lines. The pairs of control lines between the source image and the destination image are determined by user's input, and the distance function of each control line is rendered using two rectangles and two cones. The distance between each pixel and its nearest control line is stored in the depth buffer through the graphics pipeline, and this is used to conduct the morphing operation efficiently. The pixel-unit morphing operation is parallelized using the compute unified device architecture (CUDA) to reduce the morphing time. We demonstrate the efficiency of the proposed technique using several experimental results.