• 대한가정학회지
• /
• 제17권2호
• /
• pp.49-56
• /
• 1979

In Korean housing designs reflect uniqueness as a result of the influence of regional and atmospheric factors. In this regard, the early use of the hot floor (ondol) system is of special significance. This system is still in use today, not only for house-heating purposes in the homes of commoners, but also for cooking in the kitchen. The present study represents an investigation of the ondol structure since its earliest known usage. Methodology involves a documentary examination of the system. In point of time, this begins with the system's earliest usage and proceeds chronnologically down to the end of the Yi Dynasty. Research indicates that something very much like the ondol system appeared in the early tribal society of Mahan and its usage continued in the state of Koguryo (during the Three Kingdoms Period) in the homes of the poor. This unique system which had its origin in cold northern areas was utilized on a much broader basis during the Koryo Dynasty. Coming down to the Yi Dynasty it found acceptance and application in all parts of the peninsula. Variations in major component parts of the structure, such as the fuel hole, the flue, the draft , and the chimney, normally reflect regional dissimilarities. It is perhaps most significant that here-in contrast to other devices we have a system that serves concurrently for both heating and cooking purposes.

• Korean Journal of Radiology
• /
• 제23권3호
• /
• pp.308-321
• /
• 2022

Transabdominal ultrasound (TAUS) is useful in all aspects of lesion screening, monitoring activity, or treating/diagnosing any related complications of inflammatory bowel disease. Its ability to screen or diagnose complications is almost the same as that of other methods, such as CT or MRI. Moreover, its noninvasiveness makes it a first-line examination method. A TAUS image depicting ulcerative colitis will show large intestinal wall thickening that is continuous from the rectum, which is mainly due to mucosal layer thickening, while for Crohn's disease, a TAUS image is characterized by a diversity in the areas affected, distribution, and layer structure. Indicators of activity monitoring include wall thickness, wall structure, and vascular tests that use Doppler ultrasound or contrast agents. While all of these have been reported to be useful, at this time, no single parameter has been established as superior to others; therefore, a comprehensive evaluation of these parameters is justified. In addition, evaluating the elasticity of lesions using elastography is particularly useful for distinguishing between fibrous and inflammatory stenoses. However, the lack of objectivity is the biggest drawback of using ultrasound. Standardizing and popularizing the ultrasound process will be necessary, including scanning methods, equipment settings, and image analysis.

• 아태비즈니스연구
• /
• 제15권1호
• /
• pp.273-287
• /
• 2024

Purpose - This study conducts the co-occurrence analysis, one of the social network analysis using global OTA's online reviews and grades in order to understand the experience structure of foreign tourists visiting cutural tourism resources in Jeju, Korea. Design/methodology/approach - For this purpose, this study selects 6 cultural tourism resources in Jeju as the study sites, and collects qualitative review data (noun, adjectives, and verb) and quantitative grade data. Findings - The co-occurrence network analysis between words and grade of market and street shows that the grade of 5 appears the most simultaneous with pork, buy, lot, try, fresh, black, food, price, seafood, local, market, good, street, etc. and the grade of 1 connects with small, dish, better, taste, etc. And the co-occurrence network analysis between words and grade of tradition and folklore shows that the grade of 5 appears the most simultaneous with village, place, museum, visit, time, life, culture, women, diver, use, lot, etc. and the grade of 1 connects with minute, spend, room, recommend, honey, etc. Research implications or originality - The above research results are relevant in order to find out the core experience of foreign tourists using online review and grade generated by foreign tourists and use as the important information to develop the strategies related to the planning and management of cultural tourism resources.

• 정보통신설비학회논문지
• /
• 제4권1호
• /
• pp.7-13
• /
• 2005

In this paper, we propose the time synchronization module on fiber optic repeater to use optic line delay for obtaining time synchronization between up-link and down-link, in the 2.3 GHz WiBro network using TDD/OFDM (Time Division Duplex/Orthogonal Frequency Division Multiplexing) Generally, when we use fiber optic repeater to remove the shade area, it occurs transmission delay which is caused by optic transmission between RAS (Radio Access Station) and fiber optic repeater and inner delay of fiber optic repeater. Because the WiBro system is adopting a TOO method and there exists the difference of switching time which is caused by these delay between up-link and down-link, it occurs ISI (Inter Symbol Interference), ICI (Inter Carrier Interference). These interference results in the reduction of the coverage. And the inconsistency between Up-Link and Down-Link switching time maybe gives rise to the interruption of communication. In order to prevent these cases, we propose synchronization module using analog optic line delay as the one of synchronizing up-link and down-link. And we propose the consideration factor for the designing time synchronization module and the feature of optic line of analog method. The measurement result of optic line time synchronization module of structure proposed is as follows, the delay error of $0.5{\mu}g$ and the insertion loss value below maximum 4.5dB in range of $0{\sim}40{\mu}s$. These results fully meet the specification of WiBro System.

• 대한토목학회논문집
• /
• 제28권3D호
• /
• pp.307-315
• /
• 2008

본 연구의 목적은 수도권 남부 국도 ITS 시범구간인 국도 3호선의 장지IC~곤지암IC구간에서 수집되는 교통자료를 기반으로 자기조직형 신경망 이론을 도입하여 국도구간의 통행시간 추정모형을 개발하는 방안을 제시하는 것이다. 지점 검지기 적정 설치위치와 구간의 연장 및 연도의 토지이용특성이 단속류의 구간통행시간에 영향을 미침을 확인하였으며, 구간 통행시간 추정을 위해 기존의 인공신경망 모형이 가지는 추가학습이 불가능하다는 단점과 신경망 구조의 최적구성이 어려운 점 등을 고려하여 자기조직형 인공신경망 구조방법을 도입하였다. 통행시간 추정결과 기존 검지기에서 수집된 자료와 최적위치에서 수집된 자료를 이용하여 모형을 검증한 결과 통행특성을 가장 잘 반영하는 지점자료를 활용한 모형의 추정력이 우수한 것으로 나타났다. 이러한 시도는 향후 국도 ITS 사업의 설계에서 검지기의 설치 위치 선정에 응용할 수 있을 것으로 기대된다.

• 대한토목학회논문집
• /
• 제29권2D호
• /
• pp.311-318
• /
• 2009

최근 지형 정보의 시각화 기술은 GIS 응용분야는 물론 게임, 가상현실, 항공 시뮬레이션 및 군사적인 목적 등을 실현하기 위한 중요한 기술로 부각되고 있다(유병현 2002). 그러나 대용량 지형 데이터를 실시간으로 처리하여 시각화를 구현하기 위한 메모리 한계성의 극복은 아직도 과제로 남아있다. 본 연구에서는 대규모 지형 표현을 위해 파일 기반의 효율적인 실시간 LOD (level-of-detail) 알고리즘 개발을 수행하였다. 실시간 LOD 알고리즘은 대규모 지형 데이터를 가시화하는데 필요한 기하학적 연산 처리를 가능하게 한다. 본 연구에서는 수치지도의 등고선이나 LiDAR, DTM, DSM 등으로부터 취득된 대용량 DEM의 가시화를 위해 계층적인 $4{\times}4$ 또는 $2{\times}2$ 타일 구조를 선택하였다. 또한 정규화된 Giga Byte급 고도데이터는 사용자 중심적 지형 정보의 원활하고 사실감 있는 표현이 될 수 있도록 고도데이터를 활용한 음영기복도를 생성하여 비메모리 방식의 계층적 타일 구조로 생성된 지형 블록에 Texture Mapping 하여 지형 가시화를 수행하였다. 대용량 데이터는 실시간 가시화를 위해 지형 데이터를 다양한 상세도를 가지는 데이터로 변형하여 이를 계층적으로 상호 연결함으로서 데이터의 손실이 최소화되며, 프레임 속도를 극대화하였고, 또한 사용자 시점에 따라 상세도 변화가 끊김없이(seamless) 고품질로 표현되도록 하였다.

• Wind and Structures
• /
• 제31권2호
• /
• pp.143-152
• /
• 2020

The wind design of buildings is typically based on strength provisions under ultimate loads. This is unlike the ductility-based approach used in seismic design, which allows inelastic actions to take place in the structure under extreme seismic events. This research investigates the application of a similar concept in wind engineering. In seismic design, the elastic forces resulting from an extreme event of high return period are reduced by a load reduction factor chosen by the designer and accordingly a certain ductility capacity needs to be achieved by the structure. Two reasons have triggered the investigation of this ductility-based concept under wind loads. Firstly, there is a trend in the design codes to increase the return period used in wind design approaching the large return period used in seismic design. Secondly, the structure always possesses a certain level of ductility that the wind design does not benefit from. Many technical issues arise when applying a ductility-based approach under wind loads. The use of reduced design loads will lead to the design of a more flexible structure with larger natural periods. While this might be beneficial for seismic response, it is not necessarily the case for the wind response, where increasing the flexibility is expected to increase the fluctuating response. This particular issue is examined by considering a case study of a sixty-five-story high-rise building previously tested at the Boundary Layer Wind Tunnel Laboratory at the University of Western Ontario using a pressure model. A three-dimensional finite element model is developed for the building. The wind pressures from the tested rigid model are applied to the finite element model and a time history dynamic analysis is conducted. The time history variation of the straining actions on various structure elements of the building are evaluated and decomposed into mean, background and fluctuating components. A reduction factor is applied to the fluctuating components and a modified time history response of the straining actions is calculated. The building components are redesigned under this set of reduced straining actions and its fundamental period is then evaluated. A new set of loads is calculated based on the modified period and is compared to the set of loads associated with the original structure. This is followed by non-linear static pushover analysis conducted individually on each shear wall module after redesigning these walls. The ductility demand of shear walls with reduced cross sections is assessed to justify the application of the load reduction factor "R".

• 한국CDE학회논문집
• /
• 제8권1호
• /
• pp.10-18
• /
• 2003

FEM (Finite Element Method) is a fundamental numerical analysis technique in wide spread use in engineering application. As the solving time occupies small portion of entire FEM analysis time because of development of hardware, the relative lime to the whole analysis time to make mesh mod-els is growing. In particular, in the case of stiffeners such as features attached to plate in ship structure, the line constraints are imposed on mesh model together with other constraints such as holes. To auto-matically generate two dimensional quadrilateral mesh with the line constraints, an algorithm is pro-posed based on the constrained Delaunay triangulation and Q-Morph algorithm in which the line constraints are not considered. The performance of the proposed algorithm is evaluated. And some numerical results of our proposed algorithm ate presented.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권10호
• /
• pp.671-677
• /
• 2004

This paper presents the design of a now controller for the read/write head of a hard disk drive. The general controller for seeking is the time-optimal control. However if we use only the time optimal control law, this could be vulnerable to chattering effect. To solve this problem, we propose a modified controller design algorithm in this paper. The proposed controller consists of bang-bang control for seeking and sliding-mode control for tracking. Moreover, to test the robustness and stability of control system, a bounded disturbance is selected to maximize a severity index. Simulation results show the superiority of the proposed controller through comparison with time optimal VSC(variable structure control).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.163.1-163
• /
• 2001

In this paper, we use time-frequency localization analysis method to analize the target function and the area of the target space. When we analize the function with the time and frequency axis simultaneously, the characteristic of the function is shown more precisely and the area is covered by a certain block. After we analize the target function in the time-frequency space, we can decide the activation functions and compose the hidden layer of the RBFN by choosing the radial basis function which can represent the characteristic of the target function, RBFN made by this method, designs the good structure proper to the target problem because we can decide the number of hidden node first.