• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.789-797
• /
• 2006

A new method for the GPS repeater based indoor positioning is proposed and its feasibility is verified by experiments in previous paper. But the problems how can identify switching GPS repeater's ID and when switching will be occurred are remained. To solve the problem faced with, we propose the time synchronized switching GPS repeater and the methods of the detection of switching time and the estimation of TDOA. First, switching GPS repeater retransmits the signals synchronized on GPS time, sequentially. Always, first switching time is synchronized with 1 PPS. Second, we formulate the detection of switching time and the estimation of TDOA and propose the various methods. No method is existed absolutely superior to others in any conditions but the method is existed superior to others in specific condition. Finally, feasibility of indoor positioning using time-synchronized switching GPS repeater is evaluated through experiments in anechoic chamber and general environment with multipath.

• Journal of Information Technology Services
• /
• v.21 no.4
• /
• pp.1-26
• /
• 2022

Recently, the number of cases of purchasing food online has been increased, especially in the open market. Therefore, we examined the characteristics of status quo bias and switching costs in the open market. Also, in this study, the causal relationship between the characteristics of status quo bias and switching costs, switching costs and switching intention in the open market was investigated. The analysis result consists of four parts as follows. First, in the open market, rational decision making, which belongs to the characteristics of status quo bias, was found to have a positive (+) effect on time switching cost among switching costs, but did not have a positive (+) effect on economic and psychological switching cost. Second, cognitive misperceptions was consistent with the assumption that it have a positive (+) effect on all of the economic, time, and psychological switching cost, which are switching costs in the open market. Third, psychological commitment was found to have a positive (+) effect on economic and time switching cost among switching costs, but did not have a positive (+) effect on psychological switching cost. Fourth, psychological switching cost, which belongs to switching costs in the open market, was found to have a negative (-) effect like the hypothesis set in switching intention. However, it was found that economic and time switching cost did not have a negative (-) effect on switching intention. This study subdivided the switching costs into three dimensions and compared the degree of influence on the switching intention, and the degree of influence was different for each dimension. Therefore, it was found that when switching from the existing open market to the new open market, it is not possible to simply judge that the switching costs directly has a negative (-) effect on the switching intention or does not.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.2
• /
• pp.30-39
• /
• 1989

Variable structure control (VSC) systems control the state vectors using sliding regime (SR) constructed switching logic, switching plane and control law. Saturation function switching logic is used to improve the drawback which occurs in traditional sign function switching logic. Switching plane with time-varying parameter is proposed to improve the drawback which occurs in switching plane with constant parameter and it is suggested the control law which has time-varying parameter. The stability of VSC system controlled by proposed time-varying SR is discussed, and the good control behavior was shown through computer simulation using proposed SR.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.1
• /
• pp.13-17
• /
• 2006

In this paper, the RCF(Resistive Companion Form) analysis method which is used to analyze small signal stability problems of non-continuous systems including switching devices. The RCF analysis method is mathematically rigorous and computes eigenvalue of the system periodic transition matrix based on discrete system analysis method. As an effect of switching operations, the eigenvalues of the systems are changed and newly unstable oscillation modes may be occurred. As an illustrating example, the oscillation modes of the system with different switching time intervals are computed exactly by the RCF analysis method and the results show that ON/OFF time intervals of switching equipments are important factors to make the system stable or unstable. This result shows that the RCF analysis method is very powerful to analyze small signal stability problems of power systems including switching devices such as FACTS equipments.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.5
• /
• pp.13-18
• /
• 1978

A delay switching PLL (DSPLL) is proposed for improvement of the frequency acquisition Performance (pull-in range) while keeping a narrow bandwidth LPF. It has, between the phase detector and the LPF, just a simple RC delay circuit, a switch and another phase detector controlling the switching time. For the common second order PLL, the pull-in capability of the DSPLL is analyzed approximately, without considering additive white noise effect, and verified experimentally. It is shown that the delay switching extends the pull-in range significantly, as much as a half of lock-range. At the phase tracking mode, the delay switching does not function, to make the DSPLL be a normal PLL.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.11
• /
• pp.63-70
• /
• 1999

A PLT(10) thin film has been deposited on $Pt/TiO_2/SiO_2/Si$ substrate by sol-gel method, and its switching characteristics have been investigated with various top electrode areas, input pulse voltages and loan resistances. As the external input pulse voltage increases from 2V to 5V, the switching time decreases from $0.49{\mu}s$ to $0.12{\mu}s$. The activation energy ($E_a$) obtained from the relations between the switching time and the applied pulse voltage is evaluated as 209kV/cm. The switched charge densities at 5V obtained from the hysteresis loop and the polarization switching are $11.69{\mu}C/cm^2$ and $13.02{\mu}C/cm^2$, respectively, which agree relatively well with each other and show the difference of 10%. When the top electrode area increases from TEX>$3.14{\times}10^{-4}cm^2$ to $5.03{\times}10^{-3}cm^2$ and the load resistance increases from 50${\Omega}$ to 3.3$k{\Omega}$, the switching time increases from $0.12{\mu}s$ to $1.88{\mu}s$ and from $0.12{\mu}s$ to $9.7{\mu}s$, respectively. These switching characteristics indicate that PLT(10) thin film can be well applied in nonvolatile memory devices.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.744-749
• /
• 2013

The protection switching technology is widely adopted in the fiber-optical transmission equipments based on TDM(Time Division Multiplexing), such as PDH, SDH/SONET. A variety of protection switching algorithms for Ethernet networks and the progress of standardization are summarized in the document. There are several kinds of protection switching algorithms for Ethernet networks, such as STP, RSTP, MSTP and etc. However, since Ethernet signal move through detour route, it causes much time to recover. Accordingly, it is difficult to secure a usability of Ethernet networks and QOS(Quality of Service). Also, if the protection switching protocol standardized by IEEE and ITU-T is used, it remains a inherent network switching time for protection. Therefore, a specific protection switching algorithm for Ethernet are needed for seamless and stable operation of Ethernet networks service for Distribution Automation System(DAS). A reliable protection algorithm with no switching delay time is very important to implement Self-healing service for DAS. This study of FPGA based protection switching algorithm for Ethernet networks shows that in case of faults occurrence on distribution power network, immediate fault isolation and restoration are conducted through interaction with distribution equipments using P2P(Peer to Peer) communication for protection coordination. It is concluded that FPGA based protection switching algorithm for Ethernet networks available 0ms switching time is crucial technology to secure reliability of DAS.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.12
• /
• pp.1053-1060
• /
• 2000

In this paper, a discrete-time variable structure control method using recursively defined switching function and a decoupled variable structure disturbance compensator is used to achieve high performance circular motion control of a CNC machining center. The discrete-time variable structure control with the decoupled disturbance compensator method developed in this paper uses a recursive switching function defined as the sum of the current tracking error vector and the previous value of the switching function multiplied by a positive constant less than one. This recursive switching function provides much improved performance compared to the method that uses a switching function defined only as a linear combination of the current tracking error. Enhancements in tracking performance are demonstrated in the circular motion control using a CNC milling machine.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.85-89
• /
• 1998

A switching power stage is a very nonlinear system because it has two or more operation modes in one switching cycle. To model a switching power stage, the state space averaging method has been developed. Though it allows a unified treatment of a large variety of switching power stages, the model it yields is always very nonlinear. So, it is required to linearize the averaged model. But it is well known that a controller for a nonlinear plant designed by the linearization frequently fails in showing satisfactory control performance. Hence it is very natural to try to design a nonlinear controller for a switching power stage. In design of a switching power system, nonlinear control approaches such as adaptive control and fuzzy control have been widely studied so far. In this research, a recently developed control method, time delay control is briefly studied and a design example for a ZVS PWM half bridge converter is given. The performance of the time delay controller is compared to its conventional counterpart, PI controller by computer simulations.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.723-726
• /
• 2000

In this paper, we present an abstract object-oriented plat-form model .suitable for the real-time distributed telecommunication system. The proposed platform is constructed upon the extended version of the real-time, distributed operating system, SROS(Scalable Real-time Operating System), that is developed at ETRI and successfully operated in the ATM switching system for several years. The object-oriented software development and maintenance methodology will resolve the current software crisis in the area of telecommunication and switching systems due to the everlasting maintenance about the huge amount of the existing software and the ever increasing needs for the better and new communication services. In general, an object-oriented software platform realizes the object-oriented methodology and possesses many good aspects like high productivity, better reusability, easy maintenance, et at. The platform is also designed to present the distributed multimedia service in addition to real-time event delivery. Recently, we have been implementing a couple of prototype bated on the proposed platform. Reflecting the evaluation results from these prototypes, the final platform specification will be determined.