• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.7-13
• /
• 2001

Wire electrical discharge machining experiments in conducted to investigate characteristics of acoustic emission (AE) and electrical discharge energy due to current peak (I$_{p}$), pulse on time($\tau$/on/). The AE signals are obtained with a sensor attached to workpiece side. Machining states are identified with scanning electron microscopy and residual stress analyzer. It is demonstrated that the residual stress provide reliable informations about the machining states. Moreover, machining states can be detected successfully using both the residual stress and AE count rate.e.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.2
• /
• pp.101-115
• /
• 2004

Stress at work as well as at home is one of the most important issues in the health sector. However, very little research has been to find the relationship between the levels of stress and exercise. In this study, we used a structured questionaires received from 15th June to 29th October 2002 in order to prove the relation between the degree of exercise and stress. A total number of 1,092( 569 male, 523 female) who have worked more than one year were investigated. The results of the study were as follows： (1) The mean levels of stress were lower in the regualr exercise group than in the non-exercise group； (2) The more time spent in exercise, the lower level of stress was shown； (3) It was shown that the association between the frequency of stress was inversely realted to the frequency of exercise in males whereas the levels of stress was lowest in those who exercised less than 2 times per week in females； (4) The levels of stress was lowest in those who exercised more than 1 hour at a time. In summarizing the result of this study, the degree of exercise is realted with stress regardless of gender. Consequently, it is expected that regular and consistent exercise would be an important tools in lowering and protecting the worker's stress.

• Journal of Korean Academy of Nursing
• /
• v.24 no.1
• /
• pp.18-32
• /
• 1994

It is important to understand that patients with hemiplegia are under stress during the rehabilitation process. This study was designed to determine what changes occur in the stress perceived by these patients during the rehabilitation process. and what changes occur in the ways they coped with stress. A decriptive study with a longitudinal design was conducted. A total of 57 patients with hemiplegia who were admitted to one general hospital made up the sample for this study. A questionnaire, observations and interviews were used for the data collection which was done in three phases(within one week after admission : within one week before discharge ; within one month after discharge ). Data were analyzed using t-test, ANOVA repeated measures of ANOVA, and post hoc paired t -test, Bonferroni correction. The results of this study are : 1. Changes in the perception of stress during the rehabilitation process : There was a statistically significant differencs in the perception of stress among these patients during the rehabilitation process. On the post-hoc test. the perception of stress showed a statistically significant decrease from admission to discharge. The perception of psychological stress was high during the rehabilitation process as compared with the perception of physical and social stress. 2. Changes in the way the patients coped during the rehabilitation process : On admission passive coping was used by most of the subjects(91.2％). Passive coping showed an decrease from admission to discharge, but an increase from discharge to follow-up at one month post discharge. There was, however, no statistically significant changes in the way the patients coped during the rehabilitation process. 3. Changes in perception of stress during the rehabilitation process according to variables. Perception of stress among patients classified as So-Um was higher during the rehabilitation process, when compared with patients classified as So- Yang and Tae-Um. There was, however, no statistically significant difference in perception of stress over time. The patients with right sided paralysis perceived higher stress than those with left sided paralysis. There was, however, no statistically significant difference in perception of stress over time. Hence, stress was not influenced by which side was paralyzed th frequency of the relapse of the disease, or the time in the rehabilitation process. 4. Changes in coping during the rehabilitation process according to variables. There was a statistically significant difference in the way the patients coped at follow- up according to the three different kinds of the constitution groups. In other words, coping was not used by patients classified as Tae-Um but was used by those classified as So-Um. On the repeated measures of ANOVA, there was a statstically significant difference in stress over time, and an interaction between constitution and time. But the way of coping during the rehabilitation process was not influenced by which side was paralyzed nor by the frequency of the relapse of the disease. In conclusion, perception of psychological stress was high during the rehabilitation process, as compared to perception of physical and social stress. There was a statistcally significant difference in the perception of stress over time, Perception of stress showed a gradual decrease from over admission to follow-up period. There was. however, no statistically significant difference in the way of coping over time. Passive coping was used by most of patients. In the study, these findings suggest a need for nursing care related to the psychological support for patients with hemiplegia both in the hospital as well as at home, and the need for education and counseling on independent self-care to help the hemiplegic patients adapt to stress using active coping.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.263-266
• /
• 2008

This paper is concerned with the analysis of elasto-plastic stress waves in a mode I semi-infinite cracked solid subjected to Heaviside pulse load. This study adopts a time-discontinuous variational integrator based on Hamiltonian in order to reduce the numerical dispersive and dissipative errors. This also utilizes an integration scheme of the constitutive model with 2nd-order accuracy which is formulated on the strain space for a rate and temperature dependent material model. Finite element analyses of elasto-plastic stress waves are carried out in order to compare the accuracy between a conventional Galerkin method and the time- discontinuous variational integrator.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.436-444
• /
• 1991

A computational method has been developed to analyze the bone-remodeling induced by external fixator. The method was based on the Finite Element Method (FEM) in combination with numerical formulation of adaptive bone-remodeling theories. As a feed-back control variable, compressive strain and effective stress were used to determine the surface remodeling and internal (density) remodeling respectively. Surface remodeling and internal remodeling were combined at each time step to predict the rel situation. A noticeable shape and density change were detected at the region between two pins and density change was decreased with time increment. At final time step, the shape and density distribution were converged closely to its original intact bone model. Similar change was detected in stress distribution. The altered stress distribution due to the pin and external fixator converged to the intact stress distribution with time.

• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.8-12
• /
• 2000

The fatigue crack propagation tests were performed in triangular and holding-time stress waveforms at $650^{\circ}C$. The behavior of fatigue crack propagation was investigated according to waveform. The analysis of high temperature fatigue crack propagation by the stress intensity factor range ${\Delta}K$, elastic fracture mechanics parameter, was not available. The behaviors of high temperature fatigue crack propagation by the J-integral(${\Delta}J_f$, J' and ${\Delta}J_c$), elasto-plastic fracture mechanics parameter, were investigated in a number of stress waveforms. The fast-fast waveform exhibited cycle-dependent(fatigue type), the slow-fast and the hold time with 500sec waveforms appear to be time-dependent(creep type) and the fast-slow and the hold time with 5, 25sec waveforms exhibited conbined behavior of both types(fatigue-creep conbined type).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.11
• /
• pp.1033-1036
• /
• 2006

We have investigated electro-optical characteristics in three kinds of twisted nematic (TN) cells on the polyimide surface. The threshold voltage and the response time of thermal stressed TN cells were same that of no thermal stressed TN cells. There were little change of value in these TN cells. On the other hand, transmittance of no thermal stressed TN cells were better than that of thermal stressed TN cells. Transmittances of TN cells on the polyimide surface decreased by increasing thermal stress time. Moreover, the residual DC of the thermal stressed TN cells increased as increasing thermal stress temperature and time. Therefore, thermal stability of TN cells were decreased gradually by giving high thermal stress for a long time.

• YAKHAK HOEJI
• /
• v.51 no.3
• /
• pp.219-227
• /
• 2007

Ginsenoside Rgl (Rgl), the pharmacologically active constituent of ginseng (Panax ginseng C.A. Meyer), has a variety of biological activities. The present study was undertaken to evaluate a possibility of Rgl whether it can be used in treatment or prevention of stress disorders. Animals were stressed by immobilization for 2 hours or electroshocks for 20 minutes. The normal group was not exposed to any stress. Rgl was subcutaneously injected as dosages of 5 and 10 mg/kg and red ginseng (RG) was orally administered 200 mg/kg as the positive control. Animals were given supplements for 5 days without stress, and then were given supplements for 5 days with stress. We recorded stress-related behavioral changes of experimental animals using the Etho-vision system. Weight of adrenal gland and levels of corticosterone in plasma were measured and stress related behaviors (smelling, grooming, face washing, rearing) were observed. Rgl didn't make significant behavioral changes in total open field and elevated plus maze test. Rgl did not influence on behavioral changes induced by electroshock stress. Whereas, 10 mg/kg of Rgl alleviated the increment of the freezing and face washing time and the decrement of the smelling and rearing time induced by restraint stress. The administration of Rgl 10 mg/kg has significantly increased the endurance time on rotating rod and swimming pool tests compared to the control group. These results indicate that Rgl can alleviate the damage induced by physical stress. This result suggests that Rgl may bea new candidate for treating stress related disorder.

• The korean journal of orthodontics
• /
• v.24 no.1 s.44
• /
• pp.105-114
• /
• 1994

The movement of teeth during orthodontic treatment requires bone remodeling process of bone formation and bone resolution. To find out the changes occuring in the cell itself, mechanical stress was applied to the cell populations involved in the bone metabolism. Bone tissue cell populations were isolated from fetal rat calvaria and divided into OC and OB groups. Following results were obtained from measuring the changes in acid & alkaline phosphatease activity, cyclic AMP and $PGE_2$ production in time lapse after the application of mechanical stress. 1. In case of the marker enzyme of specific bone tissue cell, acid phosphatase activity was high in OC group and alkaline phosphatase activity was high in OB group. 2. After the mechanical stress was applied, acid phosphatase activity was decreased in both OC and OB groups and alkaline phosphatase activity was increase in OB group. 3. When the mechanical stress was applied for 15, 30 and 60 minutes, the production of $PGE_2$ increased in both OC and OB groups, as the time span increased. 4. When the mechanical stress was applied for 20 and 40 minutes, the production of $PGE_2$ increased in both OC and OB groups, as the time span increased.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.5
• /
• pp.750-757
• /
• 2003

In order to determine creep stress intensity limit of high-temperature components, the usefulness of the creep work and time equation, defined as W$\_$c/t$\^$p/ = B(where W$\_$c/ = $\sigma$$\varepsilon$ is the total creep work done during creep, and p and B are constants), was investigated using the experimental data. For this Purpose, the creep tests for generating 1.0% strain for commercial type i16 stainless steel were conducted with different stresses; 160 MPa, 150 MPa, 145 MPa, 140 MPa and 135 MPa at 593$^{\circ}C$. The plots of log W$\_$c/ - log t showed a good linear relation up to 10$\^$5/ hr, and the results of the creep work-time relation for p, B and stress intensity values showed good agreement to those of isochronous stress-strain curves (ISSC) presented in ASME BPV NH. The relation can be simply obtained with only several short-term 1% strain data without ISSC which can be obtained by long-term creep data. Particularly, this relation is useful in estimating stress intensity limit for new and emerging class of high-temperature creeping materials.