• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.4
• /
• pp.316-333
• /
• 2021

In order to understand basic data for improving the fishing system and fishing vessel structure in coastal improved stow net fishery, a questionnaire survey and on-site hearing were conducted from May 10 to June 11, 2019 to analyze opinions on the improvement of operation status and fishing vessel structure. The questionnaire survey consisted of ten questions on the operation status of coastal improved stow net fishery and six questions on the improvement of fishing vessel structure, and the results of each question were analyzed by the region, the captain's age, the captain's career and the age of fishing vessel. As a result of analyzing opinions on the operation status of the coastal improved stow net fishery, it was found that the average time required for casting net was 32.8 to 33.0 minutes and that the average time required for hauling net was 41.0 to 42.2 minutes which took 10 to 12 minutes more than for casting net. The most important work requiring improvement during fishing operation (the first priority) were 'hauling net operation,' 'readjustment and storage of fishing gear,' and 'fish handling' and the hardest factor in fishing management were in the order of 'reduction of catch,' 'labor shortage' and 'rising labor costs.' The most institutional improvement that is most needed in coastal improved stow net fishery was an 'using fine mesh nets.' Most of the respondent to the questions on the experience in hiring foreign crews was 'either hiring or willing to hire foreign crews,' and the average number of foreign crews employed was found to be 2.3 to 2.4 persons. The most important reason for hiring (or considering employment) foreign crews was 'high labor costs.' The degree of communication with foreign crews during fishing operation were 'moderate' or 'difficult to direct work.' The most important problem in hiring foreign crews (the first priority) was an 'illegal departure.' As the survey results on the opinion of structural improvement of coastal improved stow net fishing vessel, the degree of satisfaction with fishing vessel structure related to fishing operation was found to be somewhat unsatisfactory, with an average of 3.3 points on a five-point scale. The inconvenient structure of fishing vessel in possession (the first priority), the space needed most for the construction of new fishing vessel (the first priority) and the space considered important for the construction of new fishing vessel (the first prioprity) was a 'fish warehouse.' The most preferred equipment for the construction of new fishing vessel were 'engine operation monitoring' and 'navigation safety devices.' The average size (tonnage class), the average horse power and the average total length of fishing vessel for proper profit and safety fishing operation was between 13.8 and 14.0 tonnes, 808.3 to 819.5 H.P. and 23.4 to 23.5 meters, respectively. The results of the operation status of coastal improved stow net fishery and the requirement for improving the fishing vessel structure are expected to be provided as basic data for reference when we build or improve the fishing vessel.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.6
• /
• pp.484-490
• /
• 2021

Purpose: A rheumatoid forefoot deformity includes severe hallux valgus and claw toe of the four lateral toes. The authors intended to analyze the mid-term results of the modified Hoffman procedure for a rheumatoid forefoot deformity. Materials and Methods: Twenty-two feet of eighteen patients were followed up for more than two years after the modified Hoffman procedure. The mean age was 54.7 years, and the mean follow-up period was three years and four months. Clinically visual analogue scale (VAS) and American Orthopaedic Foot and Ankle Society (AOFAS) MP-IP score were analyzed preoperatively and postoperatively. The postoperative complications, the satisfaction of patients, and the presence of plantar callosity were also analyzed. Radiographically, the hallux valgus angle, the 1st intermetatarsal angle, the 1st interphalangeal angle, the 1st interphalangeal joint arthritic change after the operation, and the dorsiflexion angle and the time to union of the 1st metatarsophalangeal joint were analyzed. Results: Clinically, the VAS and AOFAS score were respectively improved from 7.1 points and 30.3 points preoperatively to 1.5 points and 83.1 points postoperatively (p<0.001). All patients were satisfied with the results. Plantar callosity disappeared in all cases. Radiographically, the mean hallux valgus angle, the 1st intermetatarsal angle, and the 1st interphalangeal angle changed from 52.8°, 13.3°, and 7.5° preoperatively to 16.2°, 8.7°, and 14.6° postoperatively (p<0.001). The mean dorsiflexion angle of the 1st metatarsophalangeal joint was 17.2° postoperatively. The mean time to radiographic union of the 1st metatarsophalangeal joint was 11.1 weeks. There were two cock-up deformities of the lesser toe, one wound problem, and two hallux interphalangeal joint arthritis as a complication. There were no cases of nonunion of the 1st metatarsophalangeal joint. Conclusion: The modified Hoffman procedure appears to be a safe and satisfactory procedure for a rheumatoid forefoot deformity.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.511-519
• /
• 2022

In order to develop an air-stripping based remediation process to remove the TOC (Total Organic Carbon) in groundwater around the underground LPG storage cavern, the laboratory scale experiments at various conditions (change of air injection volume and temperature, the application of ultrasonic treatment, etc.) for two types of groundwater (initial TOC concentration of 608 mg/L and 153 mg/L, respectively). From results of experiment, as the air injection rate for stripping into groundwater increased from 2 L/min to 11 L/min and as the air-stripping time increased from 1 hour to 24 hour, the TOC removal efficiency of air-stripping increased. However, the TOC concentration of treated groundwater was higher than the discharge tolerance limit (100 mg/L) even after 24 hour stripping at the maximum air injection rate of 11 L/min. The main compounds of the TOC in groundwater were identified as methanol and propane and the long stripping time (more than 24 hour) was needed to separate the methanol from groundwater because of the affinity between water and methanol. At 20℃ and 4 L/min of air injection, the TOC removal efficiency increased to 59.1% after 24 hour air-stripping. When the temperature of groundwater increased to 30℃ and 40℃, the TOC removal efficiency increased up to 80.0% and 82.8%, suggesting that more than 24 hour air-stripping at 40℃ is needed to lower the TOC concentration to below 100 mg/L and the additional TOC removal process as well as the air-stripping is necessary. When the temperature increased to 60℃ and the ultrasonic treatment was conjugated with the air-stripping, the TOC removal efficiency increased to 87.8% within 5 hour stripping and the final TOC concentration (72.4 mg/L) was satisfied with the TOC discharge tolerance limit. The TOC removal efficiency for groundwater having low TOC concentration (153 mg/L) also showed similar removal efficiency of 89.7% (the final TOC concentration: 18.9 mg/L). Results in this study supported that the air-stripping conjugated with the ultrasonic treatment could remove successfully the TOC in groundwater around the underground LPG strorage cavern.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.104-115
• /
• 1992

The rice culture techniques included 'Jodosukyungbeob'(旱稻水耕法 : culture techniques of early-ripening paddy rice), 'Mandosukyungbeob' (晩稻水耕法) : culture techniques of late-Ripening paddy rice 'Handobeob'(旱稻＆lt;山稻＆gt;法 : culture techniques of upland rice), 'Myojongbeob'(苗種法 : culture techniques of paddy rice by transplanting), 'Kunangbeob'(乾秧法 : culture techniques of rice by transplanting which rears seeding in dry paddy) and 'Sudogunpanongbeob'(水稻乾播農法 : culture techniques of paddy rice seeding in dry field). Especially, 'Kunangbeob' and 'Sudogunpanongbeob' were originally developed in Korea as seen in 1600s(Kyoungje : 經濟) and early 1800s (Yoji : 要旨). In 'Jodosukyungbeob' it took 9 days for seed dipping, water-sprouting and prevent damage by birds, each for 3 days in China, but in Korea seed dipping in water took 3 days and the rest of the procedures were flexibly established. In matured soils, practices were fall plowing right after harvest, recognition of effective tillering and additional fertilization use of human manure, and stimulation of sprouting by lime application. The unique culture techniques adequate for Korean situations were practiced, which included weed control after draining accurately for 3 to 4 times, draining at mid season for improving wind and drought tolerance, rice harvesting at appropriate time for preventing grain shattering, and seeding in rows. 'Mandosukyungbeob' was improved techniques contrast to those of China, and the major contents were selection of proper varieties, good stand establishment by seeding high rates, induction of vigorous tillers, and adoption of 'Jokjongbeob'(足種法 : seeding method by foot). Also, one of the most prominent rice cultures by our ancestors was 'Kunpanongbeob' that was systemized form habitual practice of Pyongan Province. The unique technique actualized was 'Hando [旱稻(山稻)]' culture technique which was the combinations of 'Jokjongbeob', root stimulation method, and disaster-tolerant mixture cropping with adoptation of variety theory, although it was originated from China. The transplanting techniques has come before 'Jikseol'($\ulcorner$直說$\lrcorner$) and its merits were sufficiently realized. However, this method was basically prohibited from the early Chosun dynasty because extremely bad harvest was expected under drought conditions and insufficient conditions of water storage. But, it was permitted in the areas that contained water all the times and in case of large-scale farming especially. Most of rice culture was transplanted in the end of the Chosun dynasty because transplanting was continuously spreaded in the three southern provinces of Korea. Under these circumstances, transplanting technique was improved from the early to the end of the Chosun dynasty by weed control, fertilizing, water management, and quadratic transplanting. Based on these techniques, agricultural productivity was improved 5 times by that time. 'Kunpanongbeob' was created and developed properly for Korean conditions that is dry in early season and flooding in late season. This was successively developed and established into transplanting technique of nursery seedling.

• Journal of Korea Water Resources Association
• /
• v.56 no.2
• /
• pp.115-124
• /
• 2023

Currently, as the frequency of extreme weather events increases, the scale of damage increases when extreme weather events occur. This has been providing forecast information by investing a lot of time and resources to predict rainfall from the past. However, this information is difficult for non-experts to understand, and it does not include information on how much damage occurs when extreme weather events occur. Therefore, in this study, a risk matrix based on heavy rain damage rating was presented by using the impact forecasting standard through the creation of a risk matrix presented for the first time in the UK. First, through correlation analysis between rainfall data and damage data, variables necessary for risk matrix creation are selected, and PERCENTILE (25%, 75%, 90%, 95%) and JNBC (Jenks Natural Breaks Classification) techniques suggested in previous studies are used. Therefore, a rating standard according to rainfall and damage was calculated, and two rating standards were synthesized to present one standard. As a result of the analysis, in the case of the number of households affected by the disaster, PERCENTILE showed the highest distribution than JNBC in the Yeongsan River and Seomjin River basins where the most damage occurred, and similar results were shown in the Chungcheong-do area. Looking at the results of rainfall grading, JNBC's grade was higher than PERCENTILE's, and the highest grade was shown especially in Jeolla-do and Chungcheong-do. In addition, when comparing with the current status of heavy rain warnings in the affected area, it can be confirmed that JNBC is similar. In the risk matrix results, it was confirmed that JNBC replicated better than PERCENTILE in Sejong, Daejeon, Chungnam, Chungbuk, Gwangju, Jeonnam, and Jeonbuk regions, which suffered the most damage.

• 한국노년학
• /
• v.39 no.2
• /
• pp.199-211
• /
• 2019

The purpose of this study is to analyze leisure satisfaction and leisure performance according to whether elderly people are performing their preferred leisure activities. For the analysis, we used sample from the 6th (2015) panal data as Korean Retirement and Income Study(KReIS). The results of this study were as follows. First, the total data of 4,197 elderly (2,212 young-old and 1,985 old-old) were analyzed. As a result, weekday and weekend leisure time of the old-old (7.64 hours / 7.81 hours) than the young-old (6.83 hour / 7.39 hour) was increased and resting activites (over 70% of watching TV and listening to the radio) accounted for more than 80% of the both elderly leisure activities. Leisure performance were higher in old-old who did not perform preferred leisure activities during weekdays. Leisure performance on weekends was higher in old-old regardless of whether they had preferred leisure time. Average of leisure performance was high in both groups and they responded leisure satisfaction was moderate. In the case of need for leisure change, young-old was higher than oid-old regardless of preference leisure performance and day of the week. However, the responses of the both groups are closed to those that do not want to change. Based on the results of this study, it should be practiced such as develomenting program and introduction of health management system considering leisure constraints to improve leisure satisfaction and continuance of leisure activities for young-old and old-old. We also emphasize the need for a systematic survey scale that takes into account the qualitative aspects of leisure activities as well as the subjective factors influencing leisure participation.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_2
• /
• pp.1651-1669
• /
• 2023

Sea ice currently covers approximately 7% of the world's ocean area, primarily concentrated in polar and high-altitude regions, subject to seasonal and annual variations. It is very important to analyze the area and type classification of sea ice through time series monitoring because sea ice is formed in various types on a large spatial scale, and oil and gas exploration and other marine activities are rapidly increasing. Currently, research on the type and area of sea ice is being conducted based on high-resolution satellite images and field measurement data, but there is a limit to sea ice monitoring by acquiring field measurement data. High-resolution optical satellite images can visually detect and identify types of sea ice in a wide range and can compensate for gaps in sea ice monitoring using Geostationary Ocean Color Imager-II (GOCI-II), an ocean satellite with short time resolution. This study tried to find out the possibility of utilizing sea ice monitoring by training a rule-based machine learning model based on learning data produced using high-resolution optical satellite images and performing detection on GOCI-II images. Learning materials were extracted from Liaodong Bay in the Bohai Sea from 2021 to 2022, and a Random Forest (RF) model using GOCI-II was constructed to compare qualitative and quantitative with sea ice areas obtained from existing normalized difference snow index (NDSI) based and high-resolution satellite images. Unlike NDSI index-based results, which underestimated the sea ice area, this study detected relatively detailed sea ice areas and confirmed that sea ice can be classified by type, enabling sea ice monitoring. If the accuracy of the detection model is improved through the construction of continuous learning materials and influencing factors on sea ice formation in the future, it is expected that it can be used in the field of sea ice monitoring in high-altitude ocean areas.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.3
• /
• pp.97-113
• /
• 2023

In order to generalize the social entrepreneurship model with cooperation orientation and increase the possibility of using the model, this study developed a measurement tool and tested it with 389 executives of social enterprises. For the development of the measurement tool, preliminary measurement items were formed through review of previous studies, and a questionnaire was tentatively composed of 40 measurement items in five areas through an expert panel review of the measurement items. A total of 389 questionnaires were collected by conducting a questionnaire survey targeting Korean social enterprise managers, and exploratory and confirmatory factor analysis were conducted using 375 questionnaires that could be analyzed. Five factors for 24 items were derived through exploratory factor analysis and reliability analysis. Through a series of analysis processes including primary and secondary confirmatory factor analysis, the model fit of the newly constructed social entrepreneurship research model was confirmed, and the validity and reliability of the measurement tools were verified. As a result of this study, the model fit of the social entrepreneurship model(social value orientation; innovativeness; pro-activeness; risk-taking; cooperation orientation) is verified, thereby improving the theoretical explanatory power of social entrepreneurship research and at the same time providing the basis and basis for theoretical expansion of follow-up research. The study proved the possibility of generalizing the social entrepreneurship model with added cooperation orientation, and at the same time, the measurement tool used in this study was widely used as a tool to measure social entrepreneurship theoretically and practically. In addition, it was confirmed that the cooperation orientation is manifested in corporate decision-making and activity behaviors for resource mobilization and capacity building, opportunity and performance creation, social capital and network reinforcement, and governance establishment of social enterprises.

• Pediatric Infection and Vaccine
• /
• v.31 no.1
• /
• pp.37-45
• /
• 2024

Purpose: This study aimed to examine the clinical features and determinants of macrolide-unresponsive Mycoplasma pneumoniae pneumonia (MUMP) and to assess the differences in the time to fever resolution between doxycycline (DXC), tosufloxacin (TFX) and corticosteroid (CST) as second-line treatment. Methods: We retrospectively analyzed the medical records of patients under the age of 18 who were admitted to Nowon Eulji University Hospital between July 2018 and February 2020, diagnosed with mycoplasma pneumonia. Macrolide resistance was confirmed by detecting point mutations in the 23S rRNA gene. MUMP was clinically defined by persistent fever (≥38.0℃) lasting for 72 hours or more after the initiation of macrolide treatment. In cases of MUMP, patients were treated with an addition of CST, or the initial macrolide was replaced either DXC or TFX. Results: Out of 157 cases of mycoplasma pneumonia, 83 cases (52.9%) did not respond to macrolides. Patients with MUMP exhibited significantly higher C-reactive protein (CRP) levels (3.2±3.0 vs. 2.4±2.2 mg/dL, P=0.047), more frequent lobar/segmental infiltrations or pleural effusions (56.6% vs. 27.0%, P<0.001; 6.0% vs. 0.0%, P=0.032), and a higher prevalence of 23S rRNA gene mutations (96.4% vs. 64.6%, P<0.001) when compared to those with macrolide-susceptible M. pneumoniae pneumonia. In terms of second-line treatment, 15 patients (18.1%) responded to CST, 30 (36.1%) to DXC, and 38 (45.8%) to TFX. The time to defervescence (TTD) after initiation second-line treatment was significantly shorter in the CST group compared to the DXC (10.3±12.7 vs. 19.4±17.2 hours, P=0.003) and TFX groups (10.3±12.7 vs. 25.0±20.1 hours, P=0.043), with no significant difference observed between the DXC and TFX groups (19.4±17.2 vs. 25.0±20.1 hours, P=0.262). Conclusions: High CRP levels, the presence of positive 23S rRNA gene mutation, lobar or segmental lung infiltration, and pleural effusion observed in chest X-ray findings were significant factors associated with macrolide unresponsiveness. In this study, CST demonstrated a shorter TTD compared to DXC or TFX. Further, larger-scale prospective studies are needed to determine the optimal second-line treatment for MUMP.