• Title/Summary/Keyword: time interval signal

Search Result 302, Processing Time 0.026 seconds

Comparison of two sampling intervals and three sampling intervals VSI charts for monitoring both means and variances

  • Chang, Duk-Joon
    • Journal of the Korean Data and Information Science Society
    • /
    • v.26 no.4
    • /
    • pp.997-1006
    • /
    • 2015
  • In industrial quality control, when engineers use VSI control procedure they should consider both required time to signal and switching behaviors together in the case of production process changed. Up to the present, many researchers have studied fixed sampling interval (FSI) chart and variable sampling interval (VSI) chart in the points of average number of samples to signal (ANSS) and average time to signal (ATS). However, ANSS and ATS do not provide any switching information between different sampling intervals of VSI schemes. In this study, performances of two sampling intervals VSI chart and three sampling intervals VSI chart are evaluated and compared. The numerical results show that ANSS and ATS values of two sampling intervals VSI chart and three sampling interval VSI chart are similar regardless the amount of shifts. However, the values of switching behaviors including ANSW are less efficient in three sampling intervals VSI charts than in two sampling intervals VSI chart.

Study on the Application of Pedestrian Twice Crossing (보행신호 1주기 2회 부여 운영 방안 연구)

  • Chae, HeeChul;Eom, Daelyoung;Yun, Ilsoo
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.19 no.3
    • /
    • pp.14-27
    • /
    • 2020
  • Pedestrian deaths account for a high percentage of deaths in traffic accidents in Korea, raising interest in pedestrian safety policy. However, since the walk signal time is applied based on the length of the crosswalk without considering the walker and the signal cycle, the walk waiting time is relatively longer than the crosswalk, causing pedestrian jaywalking. In this study, due to an unreasonable signal time plan during a road crossing where a signal is installed, the pedestrian's walk signal was given twice a cycle of crossings, and the operational and safety effects of the signal system were quantitatively and qualitatively analyzed, and the operational effects of the signal interval and jaywalking rate were assessed by different signal intervals. The results showed that jaywalking and waiting time decreased, and the shorter the interval between the application of the walk signal time, the less jaywalking is analyzed. However, there is a risk of vehicle conflict due to pedestrian exposure, and measures for expanding safety for operation were proposed.

Mixing matrix estimation method for dual-channel time-frequency overlapped signals based on interval probability

  • Liu, Zhipeng;Li, Lichun;Zheng, Ziru
    • ETRI Journal
    • /
    • v.41 no.5
    • /
    • pp.658-669
    • /
    • 2019
  • For dual-channel time-frequency (TF) overlapped signals with low sparsity in underdetermined blind source separation (UBSS), this paper proposes an effective method based on interval probability to estimate and expand the types of mixing matrices. First, the detection of TF single-source points (TF-SSP) is used to improve the TF sparsity of each source. For more distinguishability, as the ratios of the coefficients from different columns of the mixing matrix are close, a local peak-detection mechanism based on interval probability (LPIP) is proposed. LPIP utilizes uniform subintervals to optimize and classify the TF coefficient ratios of the detected TF-SSP effectively in the case of a high level of TF overlap among sources and reduces the TF interference points and redundant signal features greatly to enhance the estimation accuracy. The simulation results show that under both noiseless and noisy cases, the proposed method performs better than the selected mainstream traditional methods, has good robustness, and has low algorithm complexity.

A Study on Alarm call of Black-tailed Gulls(Larus crassirostris) for Bird Strike Program (항공기-조류 충돌 프로그램을 위한 괭이갈매기 경계음 연구)

  • Park, Shi-Ryong;Chung, Hoon
    • Journal of the Korean Society for Aviation and Aeronautics
    • /
    • v.14 no.4
    • /
    • pp.87-93
    • /
    • 2006
  • The black-tailed gull chicks, Larus crassirostris, recognize various adult voice signal base on the simple patterns. We investigated behavior change in black-tailed gull chicks through physical manipulation of mew call. They were playback in four situations differing in physical character: 1) frequency manipulation only, 2) duration manipulation only, 3) call intensity(dB) manipulation only, and 4) call interval manipulation only. We observed occurrence of different response of the chicks, which were categorized into two behaviors(hidden and return behavior). The manipulated frequency, duration, and intensity were directly correlated. The chicks exposed to only manipulated call interval(0.5, 1sec) made significantly more hidden and return behavior. Adult black-tailed gull only increased flight time on manipulated call interval. The results suggest that black-tailed gulls use short call interval for alarm signal. The analysis of alarm signal provides an important on basic study of bird strike.

  • PDF

A Study on Process Characterization based on Vibration Signals Transmitted to the Mold in the Press Molding Process (프레스성형공정에서 금형에 전달되는 진동 신호에 기반한 공정특성 분석에 대한 연구)

  • Junhan Lee;Jongsun Kim
    • Design & Manufacturing
    • /
    • v.17 no.1
    • /
    • pp.56-63
    • /
    • 2023
  • In this study, the vibration signal of the mold was measured and analyzed to monitor the process information and characteristics during the press molding process. A necklace-type picture frame mold was used for press molding, and the vibration signal was measured by GY-61 acceleration sensor module attached to the surface of the upper (movable) mold base. The change of the vibration signal of the mold according to press speed was analyzed. As a result, the vibration signal had a large change at five sections: "Holder contact", "Punch contact and start of pressing", "End of pressing", "Mold open", and "Demolding". The time difference between "Punch contact and start of pressing" and "End of pressing" means the pressing time which is the actual time the material is molded under pressing pressure. The time intervals for each section, represented by the time interval between "Holder contact" and "Punch contact and start of pressing", can be used to compare and evaluate the press speed applied to the process. By comparing the vibration signals at 60 rpm and 90 rpm, the amplitude at the section of "Punch contact and start of pressing" increased as the press speed increased. This result means that as the press speed increases, more force and pressure is applied to the material. Also, the peak values of the other sections were found to increase as the press speed increased. It was found that the pressing time, the time interval between "Punch contact and start of pressing" and "End of pressing", decreases as the pressing speed increases. Similarly, press speed factor, the time interval between "Holder contact", and "Punch contact and start of pressing", is found to be shorter. Therefore, based on the result of this study, the pressing time, press speed, pressing(punching) pressure of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process information and characterization can be evaluated as the change of the mold vibration during press molding.

  • PDF

EVALUATION OF PEDESTRIAN SIGNAL TIMING AT SIGNALIZED INTERSECTION (신호횡단보도 보행등 녹색신호시간에 관한 연구)

  • 장덕명;박종주
    • Journal of Korean Society of Transportation
    • /
    • v.12 no.1
    • /
    • pp.55-73
    • /
    • 1994
  • The objective of this research is to evaluate the pedestrian signal time involving green and flashing green times. The minimum pedestrian green indication should give time for pedestrian to start crossing safely, and the flashing green indication should give time to complete the crossing. An average pedestrian crossing speed of 1.1(m/s) was estimated by analyzing the field data which was slower than the 1.2(m/s) currently used. Furthermore, the study proposed that design speed for the flashing green time should be slow speed for considerations pedestrian safety, not the average speed. The 0.78-1.01(m/s) of pedestrian speed was estimated at the elementary school areas that indicated 0.2(m/s) slower than the other areas. The pedestrian starting time (perception/reaction time) and time headway from front to back of herd was estimated to determine minimum pedestrian green time. the pedestrian starting time was estimated to determine minimum pedestrian green time. The pedestrian starting time was ranged 2.52-4.29 seconds. The time interval between the pedestrian rows was found to be 1.25-1.86 seconds, which declines as the pedestrian rows increases, The equation to calculate the pedestrian signal, which declines as the pedestrian rows increases. The equation to calculate the pedestrian signal time is proposed using the pedestrian starting time, the time interval between the pedestrian rows, and pedestrian crossing speed given area types (commercial, business, mixed, and elementary school areas), number of both-directional pedestrians for a cycle, crosswalk length and width.

  • PDF

Evaluating Properties of Variable Sampling Interval EWMA Control Charts for Mean Vector

  • Kwon, Yong-Man;Chang, Duk-Joon
    • Journal of the Korean Data and Information Science Society
    • /
    • v.16 no.3
    • /
    • pp.639-650
    • /
    • 2005
  • Theoretical and numerical comparison have shown that variable sampling interval (VSI) charts are substantially more efficient than fixed sampling interval(FSI) charts in term of ATS(average time to signal). But the frequency of switching between different sampling intervals is a complicating factor in VSI procedures. VSI EWMA charts for monitoring mean vector of related qualify characteristics are investigated. To compare the efficiencies of the proposed charts, the performances are evaluated for matched FSI and VSI charts in terms of average time to signal(ATS) and average number of samples to signal(ANSS). For the switching behavior of the proposed VSI charts, average number of switches(ANSW) are also investigated.

  • PDF

Variable sampling interval control charts for variance-covariance matrix

  • Chang, Duk-Joon;Shin, Jae-Kyoung
    • Journal of the Korean Data and Information Science Society
    • /
    • v.20 no.4
    • /
    • pp.741-747
    • /
    • 2009
  • Properties of multivariate Shewhart and EWMA (Exponentially Weighted Moving Average) control charts for monitoring variance-covariance matrix of quality variables are investigated. Performances of the proposed charts are evaluated for matched fixed sampling interval (FSI) and variable sampling interval (VSI) charts in terms of average time to signal (ATS) and average number of samples to signal (ANSS). Average number of swiches (ANSW) of the proposed VSI charts are also investigated.

  • PDF

Digital Conversion Error Analysis in a Time-to-Digital Converter (시간-디지털 변환기에서 디지털 변환 에러 분석)

  • Choi, Jin-Ho;Lim, In-Tack
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2017.10a
    • /
    • pp.520-521
    • /
    • 2017
  • The converted error is occurred by the time difference between the time interval signal and the clock in a Time-to-Digital Converter of counter-type. If the clock period is $T_{CLOCK}$ the converted error is a maximum $T_{CLOCK}$ by the time difference between the start signal and the clock. And the converted error is a maximum $-T_{CLOCK}$ by the time difference between the stop signal and the clock. However, when the clock is synchronized with the start signal and the colck is generated during the time interval signal the range of converted digital error is from 0 to $(1/2)T_{CLOCK}$.

  • PDF

A Novel Clustering Method with Time Interval for Context Inference based on the Multi-sensor Data Fusion (다중센서 데이터융합 기반 상황추론에서 시간경과를 고려한 클러스터링 기법)

  • Ryu, Chang-Keun;Park, Chan-Bong
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.8 no.3
    • /
    • pp.397-402
    • /
    • 2013
  • Time variation is the essential component of the context awareness. It is a beneficial way not only including time lapse but also clustering time interval for the context inference using the information from sensor mote. In this study, we proposed a novel way of clustering based multi-sensor data fusion for the context inference. In the time interval, we fused the sensed signal of each time slot, and fused again with the results of th first fusion. We could reach the enhanced context inference with assessing the segmented signal according to the time interval at the Dempster-Shafer evidence theory based multi-sensor data fusion.