• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.890-898
• /
• 2014

Critical conduction mode boost power factor correction converters operating at the boundary of continuous conduction mode and discontinuous conduction mode have been widely used for power applications lower than 300W. This paper proposes an enhanced variable on-time control method for the critical conduction mode boost PFC converter to improve the total harmonic distortion characteristic. The inductor current, which varies according to the input voltage, is analyzed in detail and the optimal on-time is obtained to minimize the total harmonic distortion with a digital controller using a TMS320F28335. The switch on-time varies according to the input voltage based on the computed optimal on-time. The performance of the proposed control method is verified by a 100W PFC converter. It is shown that the optimized on-time reduces the total harmonic distortion about 52% (from 10.48% to 5.5%) at 220V when compared to the variable on-time control method.

• 전자공학회논문지S
• /
• 제35S권5호
• /
• pp.48-58
• /
• 1998

In this paper, we proposed a new algorithm using characteristics of th ereconstructed phase trajectory by topological mapping developed for a real-tiem detection of the QRS complexes of ECG signals. Using fill-factor algorithm and mutual information algorithm which are in genral used to find out the chaotic characteristics of sampled signals, we inferred the proper mapping parameter, time delay, in ECG signals and investigated QRS detection rates with varying time delay in QRS complex detection. And we compared experimental time dealy with the theoretical one. As a result, it shows that the experimental time dealy which is proper in topological mapping from ECG signals is 20ms and theoretical time delays of fill-factor algorithm and mutual information algorithm are 20.+-.0.76ms and 28.+-.3.51ms, respectively. From these results, we could easily infer that the fill-factor algorithm in topological mapping from one-dimensional sampled ECG signals to two-dimensional vectors, is a useful algorithm for the detemination of the proper ECG signals to two-dimensional vectors, is a useful algorithm for the detemination of the proper time delay. Also with the proposed algorithm which is very simple and robust to low-frequency noise as like baseline wandering, we could detect QRS complex in real-time by simplifying preprocessing stages. For the evaluation, we implemented the proposed algorithm in C-language and applied the MIT/BIH arrhythmia database of 48 patients. The proposed algorithm provides a good performance, a 99.58% detection rate.

• Smart Structures and Systems
• /
• 제15권1호
• /
• pp.119-133
• /
• 2015

This paper proposed a structural time-varying damage detection method by using synchrosqueezing wavelet transform. The instantaneous frequencies of a structure with time-varying damage are first extracted using the synchrosqueezing wavelet transform. Since the proposed synchrosqueezing wavelet transform is invertible, thus each individual component can be reconstructed and the modal participation factor ratio can be extracted based on the amplitude of the analytical signals of the reconstructed individual components. Then, the new time-varying damage index is defined based on the extracted instantaneous frequencies and modal participation factor ratio. Both free and forced vibrations of a classical Duffing nonlinear system and a simply supported beam structure with abrupt and linear time-varying damage are simulated. The proposed synchrosqueezing wavelet transform method can successfully extract the instantaneous frequencies of the damaged structures under free vibration or vibration due to earthquake excitation. The results also show that the defined time-varying damage index can effectively track structural time-varying damage.

• 조명전기설비학회논문지
• /
• 제20권10호
• /
• pp.58-67
• /
• 2006

본 논문에서는 전기철도 차량기지 변전소의 전력품질을 개선하기 위한 실시간 무효전력/역률 보상설비를 제안하였으며 실제 차량기지에 적용하기 위한 최적의 용량을 제시하였다. 이를 위하여 현재 상용화된 여러 종류의 실시간 무효전력/역률 보상설비를 소개하였고 이 중에 전기철도 차량기지 변전소의 부하 특성에 가장 적합한 보상설비인 SVG(Static Var Generator)를 제시하였다. 제시된 SVG는 PSIM을 사용하여 간이 모의 시스템으로 구현되었으며 이를 통한 기본적인 보상원리와 모의 결과를 기술하였다. 실제 차량기지에 적용하기 위한 최적의 용량 설계는 실제 측정된 차량기지 변전소의 전력품질 데이터를 기초로 설계되어 졌으며 보상효과 및 경제적인 측면이 고려된 용량으로 제시되었다. 최종적으로 전압형 인버터와 직류 커패시터로 구성된 실시간 무효전력/역률 보상설비를 통한 실제 전기철도 차량기지 변전소의 전력품질 개선에 대하여도 기술되었다.

• 정보처리학회논문지D
• /
• 제13D권7호
• /
• pp.923-930
• /
• 2006

본 논문에서는 무기체계 임베디드 소프트웨어의 시간 요소를 고려한 TFM(Time Factor Method) 기반의 시스템 테스트 모델을 설계하고, 적용사례를 통하여 결과를 제시한다. 이를 위해 무기체계 임베디드 소프트웨어의 특징과 시스템 테스트 그리고 객체지향 모델의 표현방법인 UML 표기법에 대하여 알아보고, 시스템 테스트 모델 설계를 위한 TFM 접근 방법으로 시간 요소를 고려한 테스트 방법과 시간 요소 측정 방법 그리고 테스트 케이스 선정 알고리즘을 제시한다. 무기체계 임베디드 소프트웨어의 TFM 기반 시스템 테스트 모델은 세 가지 요소 (X,Y,Z) 로 구성되며, 'X' 에서는 최대시간경로를 선정하는 알고리즘을 통해 테스트 케이스가 도출되고, 'Y' 에서는 Sequence Diagram과 관련된 객체를 식별하고, 'Z'에서는 Timing Diagram을 통하여 식별된 각 객체들의 실행시간을 측정한다. 또한 제안한 W:M 기반 시스템 테스트 모델을 '다기능 미사일 방어시스템'에 적용하여 테스트 케이스를 추출하는 방법을 제시한다.

• 한국한의학연구원논문집
• /
• 제13권3호
• /
• pp.21-27
• /
• 2007

Most of studies on tobacco have researched it as economic or cultural factor. These studies, certainly, have the value of their own. But from time to time these studies have brought about romantic view regarding tobacco, and have been an obstacle to approach it as a medical factor. Thus this thesis will introduce documents of tobacco as medical factor. Through it we will be able to furnish researchers with information to treat poison caused by tobacco.

• 대기
• /
• 제14권3호
• /
• pp.19-28
• /
• 2004

In this study, two years Automatic Weather Station (AWS) data observed near the coast and islands are used to evaluate gust factors only when time averaged wind speed is higher than 5 ms. The gust factors are quite different in spatial and temporal domain according to analysis method. As the averaged time is increased, the gust factors are also increased. But the gust factors are decreased when wind speed is increased. It is because each wind speed is averaged one and a maximum wind is the greatest one for each time interval. The result from t-test is shown that all data are included within the 99% significance level. A sample standard deviation of ten minutes and one minute are 0.137~0.197, 0.067~0.142, respectively. Recently, the gust factor provided at the Korea Meteorological Administration (KMA) Homepage is calculated with one-hour averaged method. All though this method is hard to use directly for forecasting the strong wind over sea and coast, the result will be a great help to express Ocean Storm Flash in the Regional Meteorological Offices and the Meteorological Stations.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권8호
• /
• pp.390-398
• /
• 2000

Leakage impulse current of the contaminated insulators by using experiment data were studied. The impulse current in phase-time relationship was analyzed on line post insulators. Also, frequency components and crest factor of the leakage current were investigated to provide a scheme for an early detection of insulator incipient failure. The study shows that the phase-time characteristic is non-stationary and random and, non-harmonic component and crest factor can be promising parameters for detecting insulator leakage currents.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.860-863
• /
• 2002

Realizations of multirate converters are proposed using periodically time-varying (PTV) structures. By exploiting the computational redundancy of the filtering operation in a multirate filter, it is possible to implement the filter with much less hardware. In the proposed implementations, several coefficients time-share in a periodic fashion the hardware of one multiply-and-add. Therefore, each multiply-and-add circuit performs different coefficient scalings at different time instants within a period. Compared to the direct form realization, the proposed realizations reduce the hardware of an interpolator and a decimator by a factor of approximately U and M, respectively, while retaining the same processing speed, where U and M are the upsampling and downsampling factors, respectively. The approach can be used to obtain realizations for sampling rate conversion by a rational factor of U/M, where U and M are relatively prime, in which case hardware reduction by a factor of approximately UM can be achieved.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.942-945
• /
• 2005

The purpose of this study is to suggest a fundamental data for change of dynamic properties according to the loading time of resilient materials. 18 kinds of resilient materials included 4 representative types were measured at the load time of 24hours and 2hours by the method of Korea standard (KS F 2868) measuring the dynamic stiffness and the loss factor of materials under floating floors. As a result, the dynamic stiffness was increased rapidly in case of expandable polystyrene and rubber materials according to the load time, especially before 2 hours. The loss factor was represented that rubber materials with high elasticity are high, and expandable polystyrene, polyester, poly ethylene materials with low elasticity are low.