• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.1
• /
• pp.30-38
• /
• 1984

In this paper, we designed the programmable 2nd order switched capacitor filter that the center frequency can be varied linearly with the clock frequency, and that the peak gaion and the selectivity can be controlled with digital signal by the capacitor array. In addition, speech synthesizer system was constructed with this filter, korean consonants being synthesized. Therefore, this filter shows the possibility that most Korean language sounds can be synthesized in the real time mode.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.3
• /
• pp.68-68
• /
• 2001

본 논문에서는 3GPP와 ETSI에서 IMT-2000의 음성부호화 방식 표준안으로 채택한 AMR 음성부호화 알고리즘을 분석하고 C 컴파일러와 어셈블리 언어를 이용한 최적화 과정을 거친 후, 고정 소수점 DSP 칩인 TMS320C6201을 이용하여 실시간 구현하였다. 구현된 codec의 프로그램 메모리는 약 31.06 kWords, 데이터 RAM 메모리는 약 9.75 kWords, 그리고 데이터 ROM 메모리는 약 19.89 kWords 정도를 가지며, 한 프레임(20 ms)을 처리하는데 약 4.38 ms가 소요되어 TMS320C6201 DSP 칩의 전체 가용한 clock의 21.94%만 사용하여도 충분히 실시간으로 동작 가능함을 확인하였다. 또한, DSP 보드상에서 구현한 결과가 ETSI에서 공개한 ANSI C 소스 프로그램의 수행 결과와 일치함을 검증하였고, 구현된 AMR 음성부호화기를 sound I/O 모듈과 결합하여 실험한 결과, 어떠한 음질의 왜곡이나 지연 없이 실시간으로 충분히 동작함을 확인하였다. 마지막으로, Host I/O와 LAN 케이블을 이용하여 AMR 음성부호화 알고리즘을 통한 쌍방간 실시간 통신을 full-duplex 모드로 확인하였다.

• Korean Journal of Geomatics
• /
• v.4 no.2
• /
• pp.47-52
• /
• 2004

We can process and compute the position, velocity and time by satellite signals of GPS. The signals are used to compute positioning of three dimensions and timing offset of the receiver clock when we can track the tour satellite signals at least. One of the specified aims is to use less expensive single frequency code/carrier phase GPS receivers, which are typically around half the price of dual frequency receivers. In the study, the author analyzed the accuracy and applicability of frequence linear combination using triangulation points evaluated distance limitation.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.149-155
• /
• 2020

In this study, we employed Manchester code for illumination control and flicker prevention of the light-emitting diode (LED) used in a visible light communication (VLC) system. In the VLC transmitter, the duty factor of the Manchester code was utilized for illumination control; in the VLC receiver, the spike signal from an RC-high pass filter was utilized to recover the transmitted signal whilst suppressing the 120-Hz noise arising from adjacent lighting lamps. Instead of the clock being transmitted in a separate channel, a syncmark signal was transmitted in front of each data byte and used as the reference time for transforming the Manchester code to non-return-to-zero (NRZ) data in the receiver. In experiments, the LED illumination was controlled in the range of approximately 12-84% of the constant wave (CW) light via changing of the duty factor from 10% to 90%. This scheme is useful for constructing indoor wireless sensor networks using LED light that is flicker-free and presents capability for illumination control.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.204-205
• /
• 2007

We have developed a new measurement system by using GPS to complement those errors. In general, GPS receivers are composed of an antenna, tuned to the frequencies transmitted by the satellites, receiver-processors, and a highly-stable clock. The GPS mounted on the roof of TT4 in KHST receives a signal from the RS232 communication port, and it is connected to the network system in TT3 after converting with TCPIP communication. It is able to track the position of vehicle and synchronize the signal from different measurement system simultaneously. Therefore it is able to chase the fault occurrence, track inspection and electrical interruptionat real-time situation more accurately. There is not an error coursed by vehicle conditions such as slip and the slide.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1503-1510
• /
• 2007

To implement a high-precision lightning tracking system utilizing TDOA measurements, high-speed data acquisition and precise timing synchronization between ground sensors should be achieved. At the same time, considering the size of digitizer's memory, the data memory needs to be managed so that only the sampled data around the occurrence of stepped leader pulse is stored. This paper presents a detection-and-acquisition system for lightning signals that is the main equipment of ground sensor in lightning tracking system. GPS clock module is used to get precise timing synchronization and the 500MHz high speed digitizer is employed. In order to detect the leading edge of the lightning pulse and save the sampled data and its timing, lightning detection module is implemented and multi-record method is employed in the proposed system. Field experiment results show that the proposed system can detect and save the lightning signal efficiently.

• Korean Journal of Optics and Photonics
• /
• v.11 no.3
• /
• pp.166-170
• /
• 2000

A wavelength tunable all-optical clock recovery using a semiconductor optical amplifier in a fiber ring cavity is proposed and demonstrated at the wavelength of 1530 nm to 1570 nm. A synchronized optical pulse train is recovered from 10 Gbps and 30 Gbps randomly generated optical pulse streams with injection locking technique. Also, the system responses to the perturbation and the input average power variation are analyzed by a large-signal model based on time-domain travelling wave equation. ation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.1035-1037
• /
• 2012

무선 센서네트워크에서의 시각동기는 MAC 계층에서부터 APP 계층에 이르기까지 거의 모든 계층에서 다양한 목적을 위해 매우 중요한 기술이다. 본 논문에서는 무선 센서네트워크에서의 에너지 효율적인 시각동기를 위한 실시간 클럭 스큐 추정 방법을 제시한다. 재귀적 최소제곱법을 통해 오프셋 보정 정보들을 얻을 때마다 클럭 스큐가 실시간적으로 추정 및 갱신되며, 아울러 스큐 추정을 위해 각 센서노드에 저장해야할 정보를 최소화한다. 제안한 클럭 스큐 추정 방법은 기존의 클럭 오프셋 보정 방법과 쉽게 통합될 수 있으며, 이 경우 보다 정확하고 효율적인 시각동기화가 가능해진다. 시뮬레이션 및 실험 결과를 통해 제안한 클럭 스큐 추정 방법을 통한 시각동기 정확도의 향상을 보인다.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.3
• /
• pp.159-168
• /
• 2021

Precise Point Positioning-Real Time Kinematic (PPP-RTK) is an improved PPP method that provides the user receiver with satellite code and phase bias correction information in addition to the satellite orbit and clock, thus enabling single-receiver ambiguity resolution. Single station PPP-RTK concept is special case of PPP-RTK in that corrections are computed, instead of a network, by only one single GNSS receiver. This study is performed to experimentally verify the positioning accuracy performance of single baseline RTK level by a user who utilizes correction for a single station PPP-RTK using dual frequencies. As an experimental result, the horizontal and vertical 95% accuracy was 2.2 cm, 4.4 cm, respectively, which verify the same performance as the single baseline RTK.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.10-14
• /
• 1987

Considering transition gating of the input unipolar NRZ signal, the equivalent linear time-invariant model has been derived for the PLL in the timing clock recovery circuits. The magnitude of the alignment and accumulated jitter has been found along a chain of repeaters. For the timing recovery circuit of 90 Mbps optical communication system, the computer simulation shows that, for the first stage of the chain, the alignment jiter and the accumulated jitter are of -5.1766 dB and for the 7-th stage, the alignment jitter and accumulated jitter have the value of -1.0193dB, 4.9053 dB respectively.