• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.2
• /
• pp.99-109
• /
• 1994

The objective of this study was to examin some animal and sward factors which determine the daily herbage intake of high yielding dairy cows at different levels of daily herbage allowance. In this paper, the principal data relevent to the changes of sward characteristics after five days of daily strip grazing at three experimental peliods were summarized. The pregrazing herbage mass and extended height increased significantly from 5,047 kg OM/ha and 341 mm in period 1 to 6,877 kg OM/ha and 446 mm in period 3, while there was not a significant difference among herbage allowance treatments(average 6,068 kg OM/ha and 410 mm). The live leaf material in the residual herbage showed a greater reduction than the dead material and leaf sheath in terms of extended height, proportion and density. The decreased rates after grazing were higher when the level of herbage allowance decreased. Live leaves were vertically distributed to 50 cm of sward height before grazing. All live lamina distributed to 25 cm were grazed in the high and medium, and to 20 cm in the low levle of herbage allowance after grazing. The depth of grazing and grazed volume of forage material were heighly affected by the levels of hehage allowance. The biomass after grazing in the high, medium and low daily herbage allowance decreased 35, 36 and 52%, respectively, compared to before grazing level. The highly significant correlations between herbage allowance and extended tiller height(r=0.79), proportion of live lamina(r=0.94) and density of live lamina(r=O.91) after grazing, respectively, were observed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.110-116
• /
• 1988

The response of forage yield was studied with various growth indices to develop yield model and to determine optimum cutting time in three cultivars of orchardgrass 1. Number of tiller per plant was the highest at 3rd cutting stage. But, it was decreased rapidly at 4th cutting stage. Leaf Area Index (LAI) was the highest at 3rd cutting stage. LA1 was increased slowly during 15 days to 20 days after cutting and thereafter increased rapidly. 2. In dry matter yield over cutting stages, 1st cutting and 3rd cutting stages were higher yield than others. Change of dry matter yield was similar to that of LA1 in all cutting stages. 3. Leaf Elongation Rate (LER) and Specific Leaf Weight (SLW) were reached to maximum at 20 to 25 days and 25 to 30 days after cutting, respectively, 4. Dry matter yield was highly correlated with LA1 (r=0.905)and with CGR (r=0.962) over three cultivars. Also, LA1 was significantly with LER. The best-fit yield model was obtained in multiple regression equation which included both dependent variables of LA1 and CGR. 5. Optimum cutting times which were determined by the relationships between D.M. yield and LAI, and between D.M. yield and CGR, were ranged from 32 days t o 36 days depend on each cutting stages.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.81-85
• /
• 1989

One of the most important cultural techniques of pearl millet (Pennisetum americanum (L.) Leeke) is to encourage rapid and uniform emergence of seedlings to establish good stand and to let them grow well. Thus the objectives of the study were to investigate the effects of pre-sowing seed soaking and planting depth on dormancy breaking, germination and emergence of the seedlings, and to estimate the optimum planting season of pearl millet in Suwon, Korea. The seeds with dormancy germinated 99 to 100 percent when soaked in the H$_2$O$_2$ 1％ solution for 24 hours and rinsed with pure water, but germinated only 38％ and 83％ when soaked in pure water for 24 hours just after harvest and drying, and one month later from the harvest time, respectively. The seeds of Australia inbred line did not germinate at the constant 10$^{\circ}C$, but germinated at the constant 11$^{\circ}C$. It also was possible to estimate the optimum planting season by applying minimum temperature 11$^{\circ}C$ for germination. The minimum air temperature reached from late April in Suwon, Korea in regular years but fluctuated from late April to early May in 1986 and 1987. Thus, the safe planting season was mid-May for rapid and uniform germination of pearl millet seed. The optimum depth of planting was 2∼4cm under the optimum soil moisture condition, and 4 to 6 cm under the drier soil moisture condition. Subcoleoptile internode(mesocotyle) length increased according to increased depth of planting. Seedling crown placement also became deeper due to deeper planting of the seeds. The subcoleoptile internode length and seedling crown depth were positively correlated with actual planting depth, indicating that deeper planting would be not good for appropriate adventitious root and tiller development.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.548-555
• /
• 1995

This study was aimed to provide understanding on the eco-physiological response of barley tillers as affected by sowing method. Yield and yield contribution rates of tillers were investigated with the data of field experiments in the Honam Crops Experiment Station of Iri, Korea from October 1986 to July 1987. Narrow-seeding (each row placement 40cm$\times$seeding width of each row 18cm), drill-seeding (20cm$\times$5cm) and broadcasting on wide ridge (each ridge placement 120cm$\times$ridge width 90cm) were applied to examine the effects of various sowing methods. Primary tillers such as mainstem, 1 and 2 produced ears in all treatments, but the ear from a secondary tiller of 11 was observed only in broadcasting on wide ridge. Drill-seeding was the highest in number of spikelet, grain and plump grain per ear, while narrow-seeding being the lowest. The plump grain yield per square meter was 679.8g in narrow-seeding, while drill-seeding and broadcasting produced more than narrow seeding by 28.7% and 16.8% respectively. The actual yields per l0a for sowing methods showed a similar pattern to plump grain yield per square meter in which the yield was 567.6kg by narrow-seeding and the increments of drill-seeding and broadcasting were 30.6% and 15.4%, respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.163-170
• /
• 2004

A new oil crop chufa(Cyperus esculentus var. sativus) was studied to evaluate the yield potential of tuber and productivity of leaf as a new forage crop resources. Response to nitrogen fertilizer was not clear, showing low yield over 10kg/l0a of nitrogen application. Tuber yield was higher at 50cm $\times$ 15cm and 50cm$\times$20cm of planting population of tuber. Planting at early May showed high tuber yield, and sprouting tuber planting could not increased the tuber yield. The plant height of Chufa is 126cm, and the number of tiller per $\m^2$ are 671. It is moderate to lodging, but susceptable according to the amount of field products. Fresh forage and dry matter yield of above ground of chufa were 2,135kg/10a, and 590kg/l0a, respectively. The contents of crude protein, ether extract, fiber, ash, and acid detergent fiber are 24.8%, 8.1%, 38%, 64.4%, 52.8%, and 55.9%, respectively. It was considered that the nutritive value of chufa leaf in maturing stage was so good as rice straw.

• Journal of Animal Environmental Science
• /
• v.13 no.1
• /
• pp.53-58
• /
• 2007

This study was carried out to determine the effect of continuous application of animal liquid slurry on the growth and yield of rice in 2005. Field experiment was conducted under variable continuous application years of animal liquid slurry; 1, 3, 5 application years of slurry and chemical fertilizer as control plot. The effects of different application years of slurry on the growth characteristics and yield of rice were determined. The plant height and tiller's number of 1 year application of liquid slurry were lower than those of the chemical fertilizer plot. But in the plot of 5 years continuous application of animal slurry, the height and tillers of rice were higher than those of 1 year application. And the color of leaf 5 years application years plot was darker than that of the chemical fertilizer. Yield of the 5 years continuous application of slurry was 4% higher than that chemical fertilizer, but that of 1 year application was decreased 6% compared with chemical fertilizer. The long time application of animal slurry was increased content of organic matter, $P_2O_5$ and exchangeable caution(K) in soil.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.253-259
• /
• 2018

In February 2014, the rudder upper stock and the nut of a passenger ship were released and an accident occurred. That accident occurred because the steering gear of passenger ships that was intended to move many passengers. The accidents due to steering gear was zero according to 2010-2016 statistics. There is no rules prevent loosening of the upper rudder nut in "Ship Safety Act" and "Structural standard of steel ship". Since the accident, the Korea register has been revised to the joining method in Part 5 Chapter 7 of the rules in the classification of steel ships. In the field survey of 12 passenger ships operating on Mokpo and surrounding islands, the welding method was applied in the cases as the fastening method. The fastening type was equipped with two C-type structures. It was structured to be difficult to access. The NAS 3350 test was conducted to investigate ways to prevent homologous accident considering the characteristic of passenger ships that need to lift or unload rides once a year.

• Korean Journal of Agricultural Science
• /
• v.17 no.1
• /
• pp.45-51
• /
• 1990

This study was conducted to obtain basic data for the design of cooling system by the test of engine performance of the power tiller being used widely in the rural area. Among the various factors affecting engine performance, the flow rate of cooling water was considered as the major factor in this study. Motoring loss, output, fuel consumption ratio, torque, heat absorption of cooling water, and thermal efficiency were measured and analyzed based on three flow rates of cooling water such as 15, 20, and $25{\ell}/min$. The results obtained were as follows : 1. Motoring loss of the engine was 1.371 kW at 2,200 rpm., and mechanical efficiency was 79.1% at rated output level. 2. Output power of the engine increased with the flow rate of cooling water increased. 3. BSFC was 282.9g/kW-h at the flow rate of $20{\ell}/min$, and the temperature of cooling water at outlet was $80.9^{\circ}C$. 4. There was a little variation of torque of the engine depending on the flow rate of cooling water. 5. Absorption of heat by cooling water was increased with the increase of flow rate. 6. The highest thermal efficiency of 32.3% at the flow rate of $20{\ell}/min$ was observed.

• Korean Journal of Plant Resources
• /
• v.25 no.2
• /
• pp.193-199
• /
• 2012

This study was carried out to evaluate the agronomic characteristics and biological activities of $Sorghum$ $bicolor$ germplasms introduced from USA. Plant height, stem diameter, tiller number, leaf length, leaf width, leaf vein color, ear type, ear length and ear width have different from the cultivated accessions. Sweet-N-Sterile (#4) showed the tallest height, widest ear-width and stem diameter. Most of $Sorghum$ $bicolor$ plants may be available to use for bio-energy from these results showing big biomass. Antioxidant activities of 11 cultivars collected from USA were examined by DPPH assay and reducing power. Among the cultivars, Premium stock (#1), Early Sumac (#7), SS Silage (#9) and WGF Grain Sorghum (#11) showed a significantly higher antioxidant activity in comparison to others. Early Sumac (#7) and SS silage (#9) showed more strong reducing power activities than ${\alpha}$-tocopherol, a positive control. Premium stock (#1), Sweet-N-Sterile (#4), Early Sumac (#7) and SS Silage (#9) were also showed high antioxidant activities by DPPH assay and reducing power experiment. BMR Gold I (#3) displayed strong antimicrobial activity against $Escherichia$ $coli$ at minimum inhibitory concentrations (125 ${\mu}g$/ml).

• Korean Journal of Plant Resources
• /
• v.29 no.1
• /
• pp.128-135
• /
• 2016

This study examined radiation damage and the optimal gamma-ray dose for mutation breeding in oat (Avena sativa L. cv. Samhan). The seed germination rate decreased as the dose increased over 500 Gy. The median lethal dose (LD₅₀) was approximately 392 Gy. The median reduction dose (RD₅₀) for plant height, tiller number, root length, and flash weight was 411, 403, 394, and 411 Gy, respectively. The optimal dose of gamma irradiation for inducing oat mutation appears to be in the range 300-400 Gy. We performed the comet assay to observe nuclear DNA damage induced by gamma-ray irradiation. This assay showed a clear difference with gamma-ray treatments. DNA damage increased temporarily 7 days after treatment depending on the dose, while no significant difference was identified in response to 300 Gy 30 days after the gamma-ray treatments. The growth characteristics of the M₂ generation decreased as the dose increased over 400 Gy.