• 제목/요약/키워드: tile module

검색결과 26건 처리시간 0.028초

GIS기반을 이응한 도심지 터널굴착에 따른 인접 구조물 손상평가 시스템 개발 (Development of GIS Based Risk Assessment System for Adjacent Structures Due to Tunnelling-Induced Ground Movements in Urban)

  • 윤효석;박용원;오영석;김제규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.493-500
    • /
    • 2001
  • The construction of bored tunnels in soft ground inevitably causes ground movements. In the urban environment these may be of particular significance, because of their influence on buildings, other tunnels and services. The prediction of ground movements and the assessment of the potential effects on the structures is therefore an essential aspect of planning, design and construction of a tunnelling project in the urban environment. In this study, to minimize the effect of tunnelling-Induced ground movements on the adjacent structures, a system for tile settlement risk management was developed. The GIS based risk assessment system for adjacent structures developed in this study consists of several modules such as building information module, settlement evaluation module, potential risk assessment module for adjacent structures, and analysis module for monitoring data. This system focuses on controlling and managing construction processes that may lead to settlement In the surrounding buildings and can contribute to producing the optimum technical and economic design.

  • PDF

핵융합로 디버터 다중충돌제트 냉각시스템의 형상변화가 열수력학적 특성에 미치는 영향 (GEOMETRICAL EFFECTS ON THERMAL-HYDRAULIC PERFORMANCE OF A MULTIPLE JET IMPINGEMENT COOLING SYSTEM IN A DIVERTOR OF NUCLEAR FUSION REACTOR)

  • 정효연;김광용
    • 한국전산유체공학회지
    • /
    • 제22권1호
    • /
    • pp.26-36
    • /
    • 2017
  • A numerical study has been performed to evaluate thermal-hydraulic performance of a finger type cooling module with multiple-jet impingement in a divertor of nuclear fusion reactor. To analyze conjugate heat transfer in both solid and fluid domains, numerical analysis of the flow using three-dimensional Reynolds-averaged Navier-Stokes equations has been performed with shear stress transport turbulence model. The computational domain for the cooling module consisted of a single fluid domain and three solid domains; tile, thimble, and cartridge. The numerical results for the temperature variation on the tile were validated in comparison with experimental data under the same conditions. A parametric study was performed with four geometric parameters, i.e., angles between x-axis and centerlines of hole 1, 2, 3 and 4. The results indicate that the heat transfer rate was increased by 2.7% and 0.7% by the angle ${\theta}_1$ and angle ${\theta}_2$, respectively, and that the pressure drop was decreased by up to 1.8% by the angle ${\theta}_3$.

Factors Affecting Biofouling in Membrane Coupled Sequencing Batch Reactor

  • Lee, Chung-Hak
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 2003년도 The 4th Korea-Italy Workshop
    • /
    • pp.7-10
    • /
    • 2003
  • Factors affecting filtration performance were investigated in a Sequencing Batch Reactor (SBR) coupled with a submerged microfiltration module. Special bioreactors for aerobic and anoxic phases, respectively, were specifically designed in order to differentiate tile effect of Dissolved oxygen (DO) from that of mixing intensity on membrane filterability. DO concentration as well as mixing intensity proved to have a major influence on the membrane performance regardless of the SBR phase. A higher DO concentration resulted in a slower rise in TMP, corresponding to less membrane fouling.

  • PDF

The Economic Feasibility of Building-Integrated Photovoltaics System Installed on the Roof of Residential Building - Focused on Comparison with Construction Cost of BAPV System Depend on Roof Finishing Materials

  • Oh, Byung-Chil
    • KIEAE Journal
    • /
    • 제17권1호
    • /
    • pp.15-21
    • /
    • 2017
  • Purpose: This study was on the economic feasibility of BIPV system, focused on comparison with construction cost of BAPV system depend on roof finishing materials, and to suggest basic data on the construction cost. Method: Construction cost of BAPV system was calculated, by selecting asphalt single, flat type roof tile, color steel plate, titanium zinc plate as roof finishing material of residential building and by sum up each cost for roof finishing construction and cost for 3kWp-volumed PV module installation. Also, the economic feasibility was analysed quantitatively by comparing the cost for BIPV system construction, installing same volumed PV module instead of roof finishing materials. Result: 1. By installing BIPV system instead of the roof finishing material, the cost of construction falls ; about 19% in case of the titanium zinc plate, which is the most expensive, and about 11% in case of the color steel plate. 2. Reducing amount of the construction cost gets larger because of installing BIPV module instead of the roof finishing material, as the construction cost for roof finishing material gets higher ; therefore, it is more economical than BAPV system in terms of whole cost of construction.

목조주택 모형개발을 위한 평면모듈 설정에 대한 연구 - 기둥-보 방식 구조를 중심으로 - (A study on the Plan Modular Establishment for the Development of Wooden Dwelling Model - Focused on the Post & Beam Structure -)

  • 강만호;주석중;김재덕
    • 한국주거학회논문집
    • /
    • 제18권1호
    • /
    • pp.141-148
    • /
    • 2007
  • In this research, to develope wooden house model with post & beam structure which is commensurate with domestic environment, we analyzed the size and module of a unit space and space organization of existing habitation, then, based on the result, we tried to suggest general wood house modules. For this, we investigated 98 floor plans for 30 pyeong apartment in Seoul, Gyounggi-do, Gwangju, and Jeolla-do. The results are showed as follows. 1) It has shown that 7 posts distances are available in 2 bay floor plan type - 3.0 m, 3.3 m, 3.6 m, 3.9 m, 4.2 m, 4.5 m, and 4.8 m. 2) It has shown that 8 posts distances are available in 3 bay floor plan type - 3.0 m, 3.3 m, 3.6 m, 3.9 m, 4.2 m, 4.5 m, 4.8 m, and 5.1 m. It was concluded as follows, applying the standard of regulations of horizontal modular coordination design, from $\ulcorner$the standard of modular coordination design in architecture(KSF 1525)$\lrcorner$. 1) The available widths are 3.0 m, 3.3 m, 3.6 m, 4.2 m, and 4.8 m, and the available depths are 3.0 m, 3.3 m, 3.6 m, and 4.2 m. 2) To guarantee a space through post module of a room combination, we can use a module of 3.6 m, 4.2 m, 4.8 m except 3.0 m, 3.3 m among available modules. The module investigated in post & beam structure wooden house is applied in basic 6 floor plans as follows. 1) When organize the room on the basis of tile module of 3.6 m, 4.2 m, it was possible to organize the floor plan. 2) After arranging main room, making practical application of variableness which is advantage of post & beam structure, putting to practical use of extra space that becomes the combination of atypical room such as kitchen, dining room, and bathroom, it was possible to organize the floor plan of the residence. 3) It is possible to organize whole rooms through the plan module from 3.6 m to 4.2 m, that decides the floor plan of a wooden house.

PC기반의 가상현실을 이용한 굴삭기 조작 시뮬레이터 개발 (Development of a PC based Simulator for Excavator Manipulation using Virtual Reality)

  • 이세복;김인식;조창희;김성수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집A
    • /
    • pp.536-541
    • /
    • 2000
  • A low cost PC based simulator for excavator manipulation has been developed using virtual reality technology. The simulator consists of two joystick input devices, server and client PCs, an excavator kinematics module, and a graphic rendering program Open Inventor. In order to use two joysticks in the PC window environment multi-thread programing with network protocol TCP/IP has been used. To provide realistic view to the operator, CAD program Pro/Engineer and 3D modeller have been employed to create 3D part geometry of tile manipulator and virtual environmental geometries. Those geometries also have been transformed and imported to the Open Inventor. The Simulator developed is to be improved for more realistic excavator operational training.

  • PDF

주문형 IPM을 통한 Inverter 최적화 설계 및 Conducted EMI 노이즈 저감에 관한 연구 (A Study of Inverter Optimization Design and Minimization Conducted EMI Noise by Customizing IPM)

  • 조수억;최철;박한웅;김철우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2002년도 전력전자학술대회 논문집
    • /
    • pp.542-545
    • /
    • 2002
  • This paper deals with the optimization inverter design and minimization Conduced EMI noise by customizing IPM(Intelligent Power Module). Generally, In case of IPM, we realized that the trade-off relation between switching loss and spike voltage. Higher gate resistor causes tile lower spike voltage and the higher turn-off switching loss. But we know that the life cycle of inverter and the susceptibility of noise, so we optimized the gate resistor. Proposed method is that optimized the gate resistor suitable for the inverter and motor. The simulation and experimental results show that the spike voltage and Conduced EMI noise can be reduced without the additional circuit.

  • PDF

목판화 기법을 활용한 carbon board용 pattern design과 interior 장식재로서의 적용 가능성 분석 (The analysis on the possibility of applying carbon board pattern design using the woodcut technique to Interior decorating materials)

  • 김은주
    • 한국결정성장학회지
    • /
    • 제21권1호
    • /
    • pp.27-33
    • /
    • 2011
  • Carbon Board는 전자파 차폐 신소재로서 Design을 접목하여 Art Wall로 개발될 수 있으며, 친환경 건축 소재를 벽체 시공재로 이용할 경우, 마감재로도 사용될 수 있음이 파악되었다. Carbon Board의 필요성이 증가하고 있는 경향에 따라서, Module 구조를 가진 Tile, Panel 형태의 목판에 요구되는 그림, (성형)조각, 및 Graphic Design, Motif의 재구성 또는 결합으로 전체를 접착하거나, Point 부분만 장식하여 다양한 Style과 새로운 표현을 만들어 낼 수 있다. 본 논문은 인테리어산업에서 기대되는 목판화 기법의 Pattern Design을 MDF(Medium Density Fiber) Board와 Carbon Board에 적용하여, 내구력의 유용성에 관련하는 구조적, 물리적 특성을 비교하였다. (1) 정형(조립) (2) 표면(개량) (3) 세공(&조형)의 Detail Pattern과 Trimming Technique은 주로, 재질의 경도와 관련 밀도에 따라 Design의 변화를 나타내는 분석에서, Carbon Board도 MDF Board와 접합, 연결하여 Living system의 가치를 창조하고, 휴머니즘을 나타낼 수 있는 고급 내장재로서의 적용 가능성을 확인하였다.

Node.js를 활용한 웹GIS 서버의 설계와 구현 (Design and Implementation of Web GIS Server Using Node.js)

  • 전상환;도경태
    • Spatial Information Research
    • /
    • 제21권3호
    • /
    • pp.45-53
    • /
    • 2013
  • 웹GIS는 수년 동안 사용자들에게 효율적이고 정확한 공간정보를 제공하기 위해 최신 웹기술을 기반으로 발전해왔다. 또한 웹GIS 서버는 클라이언트의 요청을 빠르게 연산 처리하고 공간정보 서비스를 제공하기 위해 성능개선을 지속해왔다. 본 연구에서는 서버 개발에 자바스크립트(JavaScript)를 사용하는 이벤트 기반의 비동기식 I/O 처리가 가능한 프레임웍 기술인 Node.js를 활용하여 NodeMap이라고 이름붙인 웹GIS 서버를 설계하고 구현하였다. NodeMap은 기본적으로 OGC 표준 인터페이스를 지원하는 웹GIS 서버이다. 이를 위해 공간 인덱스 및 표준 공간쿼리 함수를 지원하는 DBMS를 활용하여 GIS 데이터를 처리하도록 하였다. 그리고 공간 정보를 타일 맵 위에 렌더링 하기 위해 HTML5 Canvas를 지원하는 Node-Canvas 모듈을 활용하였다. 마지막으로 Node.js의 가장 많이 쓰이는 커넥트 모듈 기반의 프레임웍인 Express 모듈을 활용하였다. 구현된 NodeMap은 성능테스트를 통해 향 후 웹GIS 서버개발기술로서 Node.js의 활용 가능성을 확인하였다. 본 연구를 통해 기존 서버 개발 기술과 차별화된 기술인 Node.js를 웹GIS 서버 구현에 우선적용 함으로서 향 후 인터넷 GIS 서비스에서의 활용 가능성을 제시하였다.

Coloration behaviors of phthalocyanine reactive dye on nylon substrates: experiments, empirical modeling and statistical analysis

  • Kim, Byung-Soon;Ravikumar, K.;Yoon, Seok-Han;Son, Young-A
    • 한국염색가공학회지
    • /
    • 제19권2호
    • /
    • pp.14-23
    • /
    • 2007
  • This research article explores the use of phthalocyanine reactive dye on nylon substrate. The effect of factors such as pH, temperature, liquor ratio and alkali addition on level of dye exhaustion, fixation and total fixation efficiency. Low pH, high temperature and low liquor ratio were found to be suitable conditions for maximum % exhaustion values. The effect of sulphatoethylsulphone(SES) and vinylsulphone(VS) form of the dyes on level of dye fixation was also discussed. The optimized exhaustion (%E), fixation(%F) and total fixation efficiency were determined. Modification of the dyeing process with alkali addition displayed that dye fixation(%) increased by alkali addition. Vinylsulphone(VS) moiety of the dye was found to be superior to. maximum fixation (%F). Appropriate predictable empirical models, relatively a new approach in dyeing processes, were developed incorporating interactions effects of temperature, pH and liquor ratio for predicting % exhaustion, fixation and total fixation efficiency. The significance of the mathematical model developed was ascertained using microsoft excel regression(solver) analysis module. High correlation coefficient was obtained (R2=0.9895 for % exhaustion, R2=0.9932 for fixation, R2=0.9965 for total fixation efficiency) for the model which shows prominent prediction capacity of the model for my conditions. The predictable polynomial equations developed from tile experimental results were thoroughly analyzed by ANOVA (Analysis of Variance) statistical concepts.