• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.241-249
• /
• 2023

The objective of this research was to engineer a tile module that could efficiently curtail the incidence of tile defects during the construction phase. To assess the potential diminution in defect manifestation, we executed experiments centered on surface condition, the variation in mass before and after the freeze-thaw test, and adhesive strength. Our findings demonstrated that thermal contraction and expansion induced a relatively escalated frequency of defects in the underwater setting for the aluminum mesh, while the steel mesh saw a higher defect incidence in the air environment. Additionally, it was noted that the adhesive strength exhibited a trend towards augmentation as the mesh size dwindled. Collectively, these results suggest that the employment of smaller mesh sizes can foster improved adhesive strength, consequently diminishing tile defects. Further exploration and development of the tile module, informed by these insights, can substantially enhance the efficacy of the construction process.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.3
• /
• pp.160-173
• /
• 2012

Roofing tile research conducted in Korea so far is mostly related to studies on roofing tile patterns excavation report on the roof tile klin site in the aspects of archeology architecture and history of art. There have been continuous studies on kiln ground and manufacture techniques of roofing tiles. However it is difficult to find roofing tiles research based on scientific experiments. The research on this paper performs physical and chemical experimental study to understand order, manufacturing techniques and other characteristics of Chosun Dynasty roofing tiles excavated in Dongdaemun stadium. As for physical experimental study water absorption, specific gravity, whole-rock Magnetic susceptibility rate and Differential Thermal Analysis are conducted. As for chemical experimental study, neutron activation analysis(NAA), microstructure observation, X-ray diffractometry(XRD) analysis are conducted. Result of neutron activation analysis and statistical analysis on piece of roof tile 22 samples clearly show that the roofing tile samples are from different time line and places. It also shows different composition when compare average value of rare earth resources per findspots. It means roofing tiles were manufactured from clay mineral from several places. Close inspection using XRD and polarization microscope reveals that main components of roofing tiles are quartz and felspar. Mica and Illite are found partially. XRD analysis shows mullite mineral composition which occurs when roofing tile is calcined around $1000^{\circ}C$. Differential thermal analysis shows gradual exothermic peak near $900^{\circ}C$. Based on these results, it is assumed that roofing tile is made at $900{\sim}1000^{\circ}C$. result of XRD analysis shows mullite were made near $1000^{\circ}C$. in Differential Thermal Analysis shows gradual exothermic peak near $900^{\circ}C$. this results shows that roof tiles were made near 900~1000 near $1000^{\circ}C$ mean value of whole-rock Magnetic susceptibility rate. When performed comparative analysis using whole-rock Magnetic susceptibility rate average value, findspots provided no certain classification to arrange. Nonetheless low whole-rock Magnetic susceptibility rate 0.2~0.78(${\times}103$ SI unit) is found when roofing tile patterns are Pasangmun, Taesangmun, Eosangmun, Kyukjamun, Heongsunmun. Overall absorptivity is 14~21%. It is similar to 14~18% of roofing tile from Chosun Dynasty. There is only 1.4~2.5g/cm3 of roof tile sample specific gravity. The analysis finds no difference in specific gravity by findspots.

• Journal of Broadcast Engineering
• /
• v.20 no.3
• /
• pp.388-397
• /
• 2015

High Efficiency Video Coding (HEVC)/H.265 is a new video coding standard which is known as high compression ratio compared to the previous standard, Advanced Video Coding (AVC)/H.264. Due to achievement of high efficiency, HEVC sacrifices the time complexity. To apply HEVC to the market applications, one of the key requirements is the fast encoding. To achieve the fast encoding, exploiting thread-level parallelism is widely chosen mechanism since multi-threading is commonly supported based on the multi-core computer architecture. In this paper, we implement both the Tile-level parallelism and the Frame-level parallelism for HEVC encoding on multi-core platform. Based on the implementation, we present two approaches in combining the Tile-level parallelism with Frame-level parallelism. The first approach creates the fixed number of tile per frame while the second approach creates the number of tile per frame adaptively according to the number of frame in parallel and the number of available worker threads. Experimental results show that both improves the parallel scalability compared to the one that use only tile-level parallelism and the second approach achieves good trade-off between parallel scalability and coding efficiency for both Full-HD (1080 x 1920) and 4K UHD (3840 x 2160) sequences.

• Journal of Conservation Science
• /
• v.32 no.1
• /
• pp.1-10
• /
• 2016

At the archaeological site, there are a variety of fired soil remains with which archaeomagnetic dating is measured, and there are also different kinds of kilns equipped with favorable plasticity conditions, so quality data can be gained. Among them, roof tile kilns indicate fairly great results of archaeomagnetic measuring. This should be associated with the properties of soil consisting of the kilns. With a lot of experimental results, it has been found that the fired soil samples of roof tile kilns have formed very stable residual magnetization. This author conducted archaeomagnetic research to present archaeomagnetic results of measuring about roof tile kilns from Goryeo in Gyeonggi. With the archaeomagnetic data of measuring 21 samples, this researcher tried to estimate the archaeomagnetic dating of roof tile kilns from Goryeo in Gyeonggi and divided them into three groups, group A (A.D.900~1150), group B (A.D.1150~1250), and group C (A.D.1300~1400) to figure out their relative order and arrange them in order. Through this kind of archaeomagnetic research, it will be possible to identify the dating of 21 roof tile kilns from Goryeo in Gyeonggi and also contribute considerably to chronological research on roof tile kilns from Goryeo. In the body, the remains and kilns belonging to each group are presented in detail.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.6
• /
• pp.256-262
• /
• 2018

A great amount of fly ash, which is a waste from a thermal power plant, has not been appropriately recycled until now. Landfill of flay ash causes environmental pollution and enormous economic costs. In this study, manufacturing of architectural ceramic tile was investigated replacing fly ash with clay raw material. The properties of porcelain tile was analyzed after manufacturing porcelain tile with mineral based glaze and fast firing process. In particular, the effect of the fly ash addition on the properties of ceramic tile was investigated by increasing the amount of limestone addition. Porcelain tile with fly ash showed excellent bending strength, water absorption, warping and abrasion resistance. However, a significant decrease in durability was observed through the autoclave test. Addition of limestone increased the water absorption, twisting and hydration expansion of the ceramic tile, but it was confirmed that the durability of the ceramic tile with fly ash was greatly improved. In conclusion, recycled architectural ceramic tiles, which can meet domestic construction standards, could be manufactured with the addition of fly ash and limestone.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.3
• /
• pp.154-162
• /
• 2003

This study was conducted to investigate the effects of tile drain on Physicochemical properties and crop productivity of soils under plastic film house for three years (1999 - 2001). Tiles (${\Phi}100mm$ PVC pipe) were established at 50-60 cm depth with 1 m, 2 m, and 3 m intervals in Gangseo silt loam soil under 2W-type plastic film house. Cropping system was a pumpkin-pumpkin in the first year, a cucumber-spinach-crown daisy-spinach-young radish in the second year, and a green red pepper-tomato-spinach in last year, with conventional fertilization and drip or furrow irrigation by groundwater pumping. Bulk density and soil hardness of plot with tile drain were lower than those of control (plot without tile drain). Soil water content was also lower in tile drain plot than in control regardless of soil depth, and decreased at narrower interval and longer distance from tile in the same plot, thus suggesting that water flow and density of tile drain plot was higher than those of control. Rhizosphere of spinach, a final crop of third year, was expanded more than 2 cm due probably to improvement of soil physical properties caused by tiles establishment. Electrical conductivity (EC) of topsoil decreased from $1.22dS\;m^{-1}$ to $0.82dS\;m^{-1}$ by tile drain system, and the extent of EC decrease was different with season: higher in spring and lower in summer and autumn. The $NO_{3^-}-N$ concentration in topsoil decreased, from $200mg\;kg^{-1}$ to $39mg\;kg^{-1}$. The effect of tile drain on crop yield varied with crops. Average crop productivity obtained in tile drain plot than that of control crop: 18.2% in 2 m interval, 14.2% in 3 m interval, but lower 0.2% in 1 m interval.

• Journal for History of Mathematics
• /
• v.16 no.3
• /
• pp.109-114
• /
• 2003

In this paper, we deal with partially conformal geodesic transformations in Kahler geometry by using Fermi coordinates when tile submanifold is a geodesic sphere. We derive the necessary and sufficient condition for tile existence of such transformation in terms of the Jacobi operator and its derivative.

• Composites Research
• /
• v.33 no.5
• /
• pp.235-240
• /
• 2020

In this study, in order to improve the impact resistance of the B₄C tile-inserted B₄C_p/Al7075 hybrid composite, a control method of the B₄C/Al7075 interface was developed and the characteristics of the controlled interface were analyzed. B₂O₃, Ni, and Si were coated on the B₄C tile surface using additional thermal oxidation, electroless plating, and plasma spraying. The coated B₄C tile is inserted into the B₄C_p/Al7075 composite material using the liquid pressurization method. Interfacial energy, bonding strength, and impact resistance were measured to analyze the effect of the coating. All coatings enhanced interfacial energy, bonding strength, and impact resistance, and in particular, it was confirmed that the impact resistance increased by 86.8% when B₂O₃ coating was used. This study is significant in developing and analyzing a core surface treatment method that improves the performance of B₄C/Al series composites, which are attracting attention as next-generation lightweight amour and bulletproof materials.

• Journal of Korean Elementary Science Education
• /
• v.18 no.1
• /
• pp.1-18
• /
• 1999

The work of teachers is tile critical element ill effective shooting. But most reform efforts have focused on tile teaching profession as a whole and effective schools. Only minimal attention has been given to the subset of teachers whose performance is marginal or incompetent, those who undermine the very concept of “educational excellence.” Teachers are the school's primary point of contact with students and, in large part, determine the educational goals and learning activities for students. How teaching is conducted has a large impact on students' abilities to educate themselves, and there is evidence that teacher quality directly affects student learning. Unfortunately, the evaluation of teachers' teaching abilities is not clear, and there are few cases that teachers has correctly feedback fly tile results of the evaluation of their abilities. In this study, we analysized and compared the teacher evaluation systems of Republic of Korea, Russian Federation, and tile United States of America. These results will be based on the improvement of tile systems. In Russian Federation, the highest year of teacher's teaching which affects on teacher's salary is 5. In the United States, it is 12-13 years. But in Korea, it is more than 30 years. That means the teachers who taught for many years are considered as competent teachers in Republic of Korea based on the economic factors of educational effects. In Russia and tile United States of America, teachers' academic backgrounds seriously affect ell teachers' salary. But ill Republic of Korea, teachers' academic background is a bit of a contribution to salary. In Russian federation, teachers' activities related to education, leaking abilities as well as academic background are also affect ell the salary. In Korea, older teachers have more advantages of salary and promotion than younger teachers. Principals and vice principals of Korea have influencing power over teachers because their judgements on teachers play an important part in teachers' promotion. But there is no such power of principals and vice principals in Russia and the United States of America. In Russian federation, the evaluation of teachers abilities is enforced periodically. The results of tile evaluation reflect on teachers' salary directly, After teachers are evaluated, some teachers can earn lower salaries than before. Teachers' academic backgrounds which affect ell teacher' salary are classified by courses. The teachers who have master degrees or dolor degrees of education earn much more money than the teachers who have master degrees and doctor degrees of pure science in Russian federation.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.11-19
• /
• 2021

The aim of the research is providing a fundamental data on quality and constructability of direct tile setting method depending on various cement to sand ratio for tiling dry cement mortar. A large number of tile setting failures reported is related with the cement mortar and its construction for tiling. Because of different materials of tiles, the properties of tiling dry cement mortar, an adhesive for tiling, can influence on quality and constructability of tiling differently. Practically, the easiest way of controlling the properties of the tiling dry cement mortar is to control the proportion of cement and sand. Hence, in this research, sand to cement ratio (S/C) was controlled. Since there is no standarized method on evaluating performance of dry cement mortar for tiling, a several sensory evaluation methods were suggested and executed. According to the experiments conducted in this research, the adhesive performance of cement mortar for tiles can be different depending on the sides such as tile and substrate. Additionally, depending on S/C, finishability, initial adhesive performance, and tile shifting resistance can be changed for ceramic tile. Therefore, under the conditions of this research, about 5 of S/C can be recommended for appropriate performace of tiling dry cement mortar.