• The Research Journal of the Costume Culture
• /
• v.20 no.3
• /
• pp.319-329
• /
• 2012

The market share of conglomerates is increasing in the Korean school uniform market these days. Functional fit problems occurred. Girls choose slim silhouette often experienced fit problems. The purpose of this study is to probe for functional design elements of high school girls' uniforms. A questionnaire survey was carried out. 202 high school girls took part in the survey. The questionnaire measured school uniform brand preference and size of school uniform jackets. The results of the survey show that over half of participants(56.6%) wore their jackets over nine hours per day. They considered the aesthetics of the design as the most important factor when purchasing school uniforms. That element affected their brand preference. In analyses of the fit suitability, there were no significant differences between brands. The jacket lengths were significantly different among brands, but all were evaluated as being short. About 60% of students had difficulty raising their arms while wearing their school uniform jackets. The results of this study revealed that high school girls' uniform jackets are too short and tight. Ergonomic design elements should be applied to high school girls' uniform jackets.

• Korean Journal of Human Ecology
• /
• v.24 no.2
• /
• pp.255-266
• /
• 2015

In this study, we have developed the ergonomic pattern from the 3D human body reflecting cycling posture and extensibility of the stretch fabrics. Adjusting pressure level in the construction of athlete's tight-fitting stretch garments by reducing the original pattern is a challenging subject, which influence on the performance of the wearer directly. Therefore, in this study, relationships between the reduction rates of the 2D pattern obtained from the 3D human scan and resultant clothing pressure were explored to improve the fit and pressure exerted by reduced clothing pattern. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on two consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Comparing 2/3T-pattern with T-pattern, the latter was superior to 2/3T-pattern in terms of adhere well to the waist and hip area in the 0.032 significance level. T-pattern was superior to 2/3T-pattern in terms of fitting and wear comfort. As results, the pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the skin while cycling posture, so that the extra ease for movement and good fit was not need to be considered. The optimized reduction rates were determined with the proposed reduction rate, the resultant pressure range was within the range of $0.5{\sim}3.0gf/cm^2$ at eight locations on the body except front waist band and thigh band.

• Safety and Health at Work
• /
• v.10 no.3
• /
• pp.275-304
• /
• 2019

Background: Air-purifying, tight-fitting facepieces are examples of respiratory protective equipment and are worn to protect workers from potentially harmful particulate and vapors. Research shows that the presence of facial hair on users' face significantly reduces the efficacy of these devices. This article sets out to establish if an acceptable seal could be achieved between facial hair and the facepiece. The team also created and investigated a low-cost "pressure testing" method for assessing the efficacy of a seal to be used during the early design process for a facepiece designed to overcome the facial hair issue. Methods: Nine new designs for face mask seals were prototyped as flat samples. A researcher developed a test rig, and a test protocol was used to evaluate the efficacy of the new seal designs against facial hair. Six of the seal designs were also tested using a version of the conventional fit test. The results were compared with those of the researcher-developed test to look for a correlation between the two test methods. Results: None of the seals performed any better against facial hair than a typical, commercially available facepiece. The pressure testing method devised by the researchers performed well but was not as robust as the fit factor testing. Conclusion: The results show that sealing against facial hair is extremely problematic unless an excessive force is applied to the facepiece's seal area pushing it against the face. The means of pressure testing devised by the researchers could be seen as a low-cost technique to be used at the early stages of a the design process, before fit testing is viable.

• The Research Journal of the Costume Culture
• /
• v.4 no.3
• /
• pp.373-381
• /
• 1996

Draping design system organized by European about 13C has been developed greatly for a long while, but for the purpose of the practical use the Dress form similar to human body has been needed. In order to make three-dimensional effect as fitting Muslin ot the Dress form. the Basic lien has to be established in Muslin and Dress form each. At this time, Shoulder-blade level is indicated from various angles : measure down 10cm from the back neck point, a quarter of the back neck point to the waist lie, the half-way point between neckline and bust line, measure down 41 inches from the back neck line, measure down 3 inches from the top edge of the muslin at center back and cross mark for neck line, and so forth. This study established the Basic line through the two ways of them (B.N.P∼B.L/2, B.N.P∼W.L/4), did tight fitting to the 5 kinds of Dress forms which ar normal type in the drop value(the difference between hip circumference and bust circumference), and acquired Basic Pattern. After the experiment, fitness are throughly investigate by statistical analysis of measurements. As a result, this study finds out that fit is proper when shoulder blade level is situated on a fourth of the back neck point to the waist line and a quarter point between back neck point and waist line, and waist dart is situated on the back center line and princess line.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.8
• /
• pp.1222-1233
• /
• 2006

The purpose of this study was to classify the modern image by clothing design elements. This research was done by survey method with 25 kinds of modern image photos selected in fashion magazines. The data was analyzed by Reliability Analysis, Factor Analysis, MANOVA, One-Way ANOVA, Duncan's test and MDS. The results of this study are as follows: 1. modern image was classified by 5 factors. Those were sexy-modern, elegant-modern, natural-modern, mannish-modern and minimal-modern images. 2. Sexy-modern image was well-expressed by chromatic and chromatic color coordinations. Elegant-modern image was well-expressed by fitted silhouette, fit and achromatic and chromatic color coordinations. Natural-modern image was well-expressed by A silhouette, loose apparel-fit, chromatic and chromatic coordinations and soft texture. Mannish-modern image was well-expressed by H silhouette, loose apparel-fit, chromatic and chromatic color coordinations and hard texture. Minimal-modern image was well-expressed by H silhouette, tight or loose apparel-fit and soft texture. 3. modern image was positioned into mostly hard or masculine on image scale.

• Journal of the Ergonomics Society of Korea
• /
• v.11 no.1
• /
• pp.49-65
• /
• 1992

The study has been carried out in four ways to find out the fit of the present size speces of the garments for middle aged woman. For this purpose, surveys, classifying the trunk form of middle aged woman by factor analysis and clustering, calculating coverage rate of one garment item(suit) has been used. The results are as follows: (1) In case of the survey for middle aged women, the problems concerning the length of sleeves or trousers and hip girth are found. The former too long and the latter too tight. (2) The size classification and the standard deviation for each sizes are very diffenent between 9 ready-made-garment makers. (3) In classifying the trunk forms of the middle aged women, the diversity of the trunk forms are examined. (4) In calculating coverage rates of the 5 maker's size spece, those similar to KS sizing system are the highest. The coverage rate of the smallest size is the higest, while that of the biggest is 0%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.3
• /
• pp.312-324
• /
• 2011

This investigates the type of pants preferred by Korean men in their 20s through a subjective wear test. Six types of men's pants were developed as experimental garments. The male subjects were university students between the ages of 20 and 24. Subjective wear sensations of the experimental pants were rated using seven Likert scales. A 7-point Likert-type scale was used for the evaluation, with 7 indicating the best fit. As a result, a basic men's sloper for lower body clothing was developed based on SizeKorea 2004 anthropometric measurements surveyed between 2003 and 2004. A basic pattern (A) was manipulated to tight-fit pants (E) and loose-fit pants (D, L, M, and N) by considering the ease at hip level and the style. Among the six pants, pants D and L (4cm ease at hip level) were found to be superior to others in terms of comfort, fitting, and crotch depth. With regard to ease and comfort of the crotch part, pants E and A (0cm ease at hip level) were found to be the least preferred.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.2 s.38
• /
• pp.189-198
• /
• 1991

The object of this study is to perceive the discomforts of the brassiere consumers according to their age groups & weight groups. The study procedures consisted of a status quo study, a rating on fit and performance according to brassiere types. 1. The result of the status quo study are as follows. (1) The study showed that with getting age bust circumference and bust size become larger with a bigger tendency to droop. Thus older age, bigger bust circumference and size require a technically improved version of brassieres. (2) Slightly tight fit brassieres were favored over more ample ones. The hobbling areas were center front, under armpits, and shoulder strapareas in that order. 2. The results of fit rating on different brassiere types are as follows. (1) The areas affected by brassiere performance were length from side neck point to bust point (bust length), width between bust points and bust height. (2) Compared among brassiere types, the wire type proved most effective. The bigger cup size group had higher satisfactory rate and low discomfort on wearing.

• Journal of the Korean Society of Costume
• /
• v.50 no.8
• /
• pp.67-74
• /
• 2000

The clothing behavior of male homosexuals were examined. Especially their clothing preference, clothing purchase behavior and clothing symbols as a group took were analysed. The subject was 49 male-homosexuals and the survey was done at the tray bars in Yi-Tae-Won in Seoul. The questionnaire and interview method were broth used to collect the data. The findings from the study were as follows : 1. The casual style was mostly preferred and lightly-fitted style was more preferred than loose style. Both straight type blue jeans and tight-fit style were widely worn by the subject. 2 Among design, price, color, fashion trend and sewing quality. design was the most important factor In clothing purchase. Besides design, color and fashion trend were counted more seriously than price or sowing quality. Blue and black were preferred as clothing colors. 3. Department stores were the most popular shopping place. and then traditional markets and shops near Universities were also preferred. Over 60% of the subjects answered that the decision of clothing purchase was made by himself and 20% of the subject used friend as personal information sources. The score stimuli was the most frequently used information for apparel shopping, and fashion magazines were also used as an important information source. 4. The clothing related symbols used to represent group look were lightly-fitted style. right ear-piercing, tight-fit plaid pants, leather look, rainbow flag, bandannas, reversed triangle. etc. And the subjects thought the symbols were not meaningful as group look because they were already adopted by the non-homosexual people. And they thought that their style of fashion has influenced on that of mass.

• Fashion & Textile Research Journal
• /
• v.12 no.4
• /
• pp.467-476
• /
• 2010

The purpose of this study was to develop a plausible methodology based on experimental data how to set up darts and split lines on 3D parametric body dressed with tight-fit garment. The results were as following: Through the process of making convex hull, the concave parts were straightened to make a convex hull, especially in the center part of bust, under breast part and scapular part. To figure out the optimum positions of darts and split lines, the inflection points of curve ratio were searched along the horizontal polylines of waist and bust. This procedures produced reliable results with low deviation. Using Rapidform, CATIA and Unigraphics, six patches of bodice patterns were drawn and aligned. Paired t-test results showed the outline and area between 3D surface and 2D were not significantly different, meaning this method could be adaptable when flattening 3D surfaces. The amount of waist dart measured on the pattern showed that the highest portion was allocated on 2nd dart(back), followed by 1st dart(back), 1st dart(front), 2nd dart(front)/side dart, and center back dart. A series of findings suggested that curve ration inflection point could be used as a guide to set up darts and split line on 3D parametric model with low deviation.