• 한국의류학회지
• /
• 제41권1호
• /
• pp.43-59
• /
• 2017

This study used data from a survey of adult Korean women in their twenties to learn their current practices for wearing and purchasing tight-fit jeans available on the market as well as perceptions regarding size measurements and satisfaction levels. We then determined product sizes and pattern measurements for the type of jeans worn. This study also analyzed discrepancies in product size measurements among brands to determine whether the measurements were generally suitable for average body shapes and measurements of women in their twenties. The study results were as follows. First, the survey asked women in their twenties about current practices in wearing jeans. Many respondents answered that their preferred fit is "a perfectly snug fit" and that the most common fit style of jeans was the skinny fit. Second, we selected a test pair of jeans with an identical fiber content from brands that women prefer to wear, according to the survey results. We researched the product measurements of the size respectively labeled 27 inches for each of the 8 brands' test jeans; consequently, the results showed that there were significant differences among the brands in the product measurements of each part of jeans. Third, we analyzed the pattern measurements of 8 selected brands for each area and identified pattern characteristics by brand.

• 한국안광학회지
• /
• 제16권1호
• /
• pp.97-106
• /
• 2011

목적: 구면 콘택트렌즈(렌즈)가 각막에 피팅되는 경우 렌즈가 각막을 누르는 힘(압력, 부착력)을 tight 및 flat 피팅 별로 이론적으로 비교 분석하였다. 방법: Tight 및 flat 피팅 상태에서 렌즈의 각막 부착력을 계산할 수 있는 방정식 및 수치해석 프로그램(모델)을 수립하였다. 이 모델에 근거하여 BC, 직경, 두께, 모서리 형상 등 제반 렌즈변수와 각막형상(각막의 장축/단축 비, p) 변화에 수반되는 렌즈의 각막부착력을 tight 또는 flat 피팅 별로 예측/해석하였다. 결과: 각막의 p값이 증가할수록 각막부착력은 증가한다. p 값 증가에 따른 부착력 상승은 flat 피팅 경우가 tight에 비해 월등히 크다. 렌즈의 BC가 증가할수록 각막부착력은 flat 피팅에서는 큰 폭으로 감소하는데 반해 tight 피팅에서는 그 증가가 미미하다. 렌즈 직경이 증가할수록 각막부착력은 tight/flat 피팅 모두에서 미미하게 감소한다. 렌즈의 모서리형상(모서리각도 ${\Psi}$)과 렌즈두께는 tight 피팅에서만 영향을 미치는 요소들이다. Tight 피팅된 렌즈가 각막을 누르는 힘은 모서리 각도에 비례하여 증가한다. Tight 피팅 렌즈는 두께가 증가할수록 렌즈가 각막을 누르는 각막부착력은 두께에 반비례로 감소한다. 결론: 피팅상태의 렌즈가 각막을 누르는 힘에 가장 크게 영향을 미치는 2 가지 요소는 각막의 만곡도와 렌즈의 BC이다.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.

• 한국의류산업학회지
• /
• 제13권2호
• /
• pp.253-262
• /
• 2011

The purpose of this study was improvement of the pants fit for obese women. The results were as follows; 5 obese women in their 20s and 30s were selected for the testing 3D body. They showed no significant differences in all items, comparing with the data of 5th Size Korea body dimensions. The average waist circumstance of the subjects' 3D body dimensions was 87.0 cm and hip circumstance was 102.4 cm, and their obese body types had similar mean values. Based on the survey results and the 3D body dimensions of 5th Size Korea body dimensions, a pants pattern to supplement their body type and improve a fit was designed with waist circumference(88 cm), hip circumference(103 cm), crotch length(27.1 cm), thigh circumference(62 cm), pants length(97 cm), pants hem line circumference(44 cm). Based on the detailed design of ready made pants and the study results of young obese women's preference for pants design, pants of straight silhouette and semi-tight fit which have waist line lowered by 3.5 cm from the waist circumference line, 3.5 cm belt width, no front dart and one back dart, were manufactured with 100% black cotton and cotton spandex mixed fabrics.

• 한국의류학회지
• /
• 제34권1호
• /
• pp.112-125
• /
• 2010

A Holter monitor is used for ECG monitoring of ambulatory daily life in hospital. However, the use of this apparatus causes skin allergies and discomfort in patients because of the attachment gel and tapes used to attach disposable electrodes to the skin. In this study, the development of tight-fitting clothing connected to a portable Holter monitor was proposed. In addition, the use of conductive fabrics as electrodes was proposed; this will enable the use of garments in u-health care for measuring ECG signals. The male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales. A Likert type scale was used for the evaluation and a 7 point score indicates that it provided the best fit as a tight-fitting upper clothing. Clothing pressure was measured using an air-pack-type pressure sensor (model AMI 3037-2) at 4 locations (the conductive fabric electrode) As results, a male basic sloper for upper clothing was developed and that pattern was manipulated to the tight fit pattern by considering the reduction rate of the percentage stretch in the fabric. The developed tight-fitting garment was superior in terms of subjective sensation and 6t. The mean pressure of the garment with reduction rates of 40% in width and of 50% in length was 8.45gf/$cm^2$. A conductive fabric electrode was developed by considering the sewing method and the developed electrode was detected well. The ECG data were recorded for 13 hr 19 min 44 sec and the artifacts in the ECG signals were recorded for 9 hr 3 min 46 sec (total time: 22 hr 23 min 23 sec). The artifacts data were obtained during heavy activities.

• 한국생활과학회지
• /
• 제15권5호
• /
• pp.791-802
• /
• 2006

The construction of athlete's tight-fitting garments by reducing the elastic knit pattern is an interesting subject, which directly influences the performance of the wearer. Therefore, relationships between the reduction rates of the men's pants pattern obtained using measurements of Size Korea 2004 and clothing fitting were explored to improve clothing comfort. Two pattern making methods were developed and the reduction rates were applied to those pants depending on the parts of human body. The four male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales during 4 consecutive days. While wearing the garments, subjects were kept four various postures including waist flexion and sitting etc by requests of the researchers. Likert type scale was used for the evaluation and 7 point indicates that it gave the best fit as tight-fitting pants. As results, differences in the length and girth between two piece pants pattern(style 1) and one piece pants pattern(style 2) were 0.0$\sim$0.3cm. Between two pattern making methods, one piece pants pattern(the style 2) was superior to two piece pants pattern in terms of subjective sensation and fit. Among eight tight-fitting pants, C, D, G, H pants were superior in terms of fitting and stability of waist and hip part to the others. ill case of tight-fitting pants, the reduction rate of the pattern in the course direction, the reduction rate of T2/3(66%) was better than that of T/2(50%), but the reduction rate of the pattern in the wale direction, that of the part of crotch, which was very sensitive part, should be kept the same as suggested earlier by Ziegert(1988).

• 한국생활과학회지
• /
• 제17권1호
• /
• pp.115-126
• /
• 2008

The construction of an athlete's tight-fitting garments is very important to the wearer in terms of athletic performance. Therefore pattern development of tight-fitting garments must allow for the full range of human movement and postures. In this study the relationship between the construction of a skate pants pattern and clothing fitting was explored with the aim of improving the comfort of the clothing. The four male subjects were university students between the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on four consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Results showed differences in the front-rise length and back-rise length between basic pants(A) and modified pants(B,C,D) were -5.16cm and +5.64cm. Comparing the basic pants pattern(A) with modified pants pattern(B), the latter was superior to basic pants(A) in terms of pressure sensation and closeness of fit, but there was no significant difference. Among the four tight-fitting skate pants, A and B pants were superior to the others in terms of fitting and stability of waist and hip sections. In the case of the skate pants, the number of cutting lines in the pattern had an influence on clothing comfort. A minimum cutting line for tight skate pants was better than a maximum cutting line in terms of clothing comfort.

• 한국지역사회생활과학회지
• /
• 제28권4호
• /
• pp.505-514
• /
• 2017

Although studies on the development of cool touch fabrics have been conducted widely, the effects of fitted pattern on enhancing the cooling sensation are insufficient. To investigate the effect of cool-touch fabric and fit of women's sports underwear, 3D and 2D patterns of sleeveless top and sports leggings were constructed. The performance of cool touch was tested by the Qmax value and wear test with nine subjects. Objective fit evaluation was observed by 3D virtual clothing using Clo software. Subjects rated wearing sensation such as 'cooling sensation, fit, wear comfort and preferences of purchase' using Likert's scale in the environmental chamber at $25^{\circ}C$, 45 %RH. The Qmax value of the cool touch fabric was higher than that of the PET fabric, which was well reflected in 'cooling sensation', especially in the case of a tight-fitted 3D pattern. The cooling sensation of the cool-touch fabric was not significantly elevated with 3D tight pattern as long as the size of the 2D pattern was similar to that of 3D pattern. However, the purchase preference was highly correlated with 3D fit and wear comfort.

• 한국생활과학회지
• /
• 제21권3호
• /
• pp.551-565
• /
• 2012

The primary goal of this study was to provide a systematic methodology of utilizing 3D technology for tight-fit performance sportswear using information of skin deformation in various posture. Technical tools used in this study are Cyberware whole body scanner, RapidForm2004, 2C-AN 3D pattern development program, and YukaCAD. Analysis of the 3D skin deformation while knee joint was bent from $0^{\circ}$ to $60^{\circ}$ revealed that the length of dermatomes L4 was remained consistent during knee bending. Therefore, L4 was chosen as a major cutting line. To develop a highly ergonomic pattern, replicas of static and dynamic postures were developed and integrated using two methods, one is morphing method (Sqirlz Morph), and the other is AutoCAD. Experimental tight-fit garments called 'Derm-Mov Pattern' was designed using dematomes L4, L2, and inner line under knee and compared with four other patterns. As results, AutoCAD was appropriate as a integrating method of various postures. In wear test, 'Derm-Mov Pattern' was rated high (p < .001), in terms of pressure comfort especially around front crotch area. However, wear sensation was not signipicantly different in other area due to highly extensible property of materials. Pressure distribution was relatively even in these experimental garments.

• 복식문화연구
• /
• 제29권6호
• /
• pp.904-921
• /
• 2021

The aim of this study was to develop a body type suitable for adult men aged from their 20s to their 40s and to present a method of drafting related patterns. To this end, the somatic surface pattern data from previous studies were used. The research method involved drafting torso patterns for each type by setting and distributing the ease to the somatic surface pattern. Appearance evaluation was performed with virtual clothing. Then, the torso pattern for each body type was completed and presented as a draft method. SPSS was used for data analysis in this study. The research results are as follows. Types 1, 2, and 3 were set to 7%, 6%, 5%; 7%, 6%, 4%; and 6.5%, 7%, and 6% for chest, waist, and hip circumference measurements, respectively. The ratio of front to back was 50%:50%, 50%:50%, and 50%:50% of the spare for each body part for Type 1; 70%:30%, 50%:50%, and 60%:40% for Type 2, and 60%:40%, 70%:30%, and 60%:40% for Type 3. A tight-fit torso pattern for each body type suitable for adult males in their 20s to 40s was drafted, which was modified and supplemented through the evaluation of the first and second virtual wear. Considering the practicality of this approach, for generalization of the patterns, the items of the pattern were converted into a drafting method and presented as a draft method.