• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.72-80
• /
• 2006

Electric Power Steering (EPS) mechanism has become widely equipped in passenger vehicle due to the increasing environmental concerns and higher fuel efficiency. This paper describes the development of concurrent simulation technique and simulation integration technique of EPS control system with a dynamic vehicle system. A full vehicle model interacting with EPS control algorithm was concurrently simulated on a single bump road condition. The dynamic responses of vehicle chassis and steering system resulting from road surface impact were evaluated and compared with proving ground experimental data. The comparisons show reasonable agreement on tie-rod load, rack displacement, steering wheel torque and tire center acceleration. This concurrent simulation capability was employed fur EPS performance evaluation and calibration as well as for vehicle handling performance integration and synthesis.

• Archives of design research
• /
• v.6 no.1
• /
• pp.73-86
• /
• 1993

The development of Korean textile industry has continued for the early industrialization. But a change in situation of circumstances, textile industry undergoes hard times. To overcome the barrier, therefore, technical development and design innovation are needed to make high value added product. This paper try to put to practical use of the silk weighting process technique(WPT). First, we investigate the technical trend of WPT to summarize the theory, and examine the feasibility of technical development. Second, the application of Graft process to silk textile is examined to know whether it is possible as an practical use. Next, we present the practical way of WPT using MAA monomer through experiment. The results are as follow. 1) Considering the lack of silk yarn. Graft process is appropriate new technique to make the value added product, and fine quality. 2) Studing textile goods, it need inter-displlinary co-work not only fiber engineering scope because textile goods is closely related with fashion industry. 3) MAA monomer used in this paper is more excellent then other monomer because it has good weighting effect and does not harm to the nature of textile. 4) MAA WPT is good for silk textiles of ladies jacket and neck-tie.

• East Asian mathematical journal
• /
• v.27 no.1
• /
• pp.11-21
• /
• 2011

In this paper, we try to extend the viscosity approximation technique to find a particular common zero of a finite family of accretive mappings in a Banach space which is strictly convex reflexive and has a weakly sequentially continuous duality mapping. The explicit viscosity approximation scheme is proposed and its strong convergence to a solution of a variational inequality is proved.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.262-263
• /
• 2006

This paper presents a scheme to solve the congestion problem with phase-shifting transformer(PST) and power generation using linear programming method. A good design of PST and power generation control can improve total transfer capability(TTC) in interconnected systems. This paper deals with an application of optimization technique for TTC calculation. linear programming method is used to maximize power flow of tie line subject to security constraints such as voltage magnitude and real power flow. The proposed method is applied to 10 machines 39 buses model systems to show its effectiveness.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1113-1118
• /
• 2004

Ballasted track is constructed in consideration of the maintenance. The application time and frequency of MTT(Multiple Tie Tamper) and BS(Ballast Cleaner) depend on track geometry measurements. This paper presents the application of Ground Penetrating Radar(GPR), Falling Weight Deflectometer(FWD), and Portable Ballast Sampler (PBS) to evaluate the effects of track geometry due to substructure deterioration and to build a reliable substructure evaluation system.

• Journal of the Korean Mathematical Society
• /
• v.53 no.6
• /
• pp.1411-1429
• /
• 2016

We consider the nite volume element method for elliptic problems using isoparametric bilinear elements on quadrilateral meshes. A gradient recovery method is presented by using the patch interpolation technique. Based on some superclose estimates, we prove that the recovered gradient $R({\nabla}u_h)$ possesses the superconvergence: ${\parallel}{\nabla}u-R({\nabla}u_h){\parallel}=O(h^2){\parallel}u{\parallel}_3$. Finally, some numerical examples are provided to illustrate our theoretical analysis.

• Journal of Korean Academy of Nursing
• /
• v.26 no.1
• /
• pp.5-14
• /
• 1996

The purpose of this study is to find the Korean women's view to pregnancy within the Korean cultural context, to help nurses understand psychosocioemotional schema of the pregnant women, and to contribute to theory-building on the meaning of pregnancy. The interviewees were 21 women in their twenties or thirties and they were selected by theoretical sampling technique. Thirteen women of the interviewees were single and others married. Data were collected by in-depth interviews from September November in 1994. Interviews were tape-recorded and transcribed. Data were analyzed by Van Kaam's phenomenological method. Results were as follows. Eighty two descriptive expression were found and they were grouped under fourteen common factors. These are 「to maintain family」, 「instinct」, 「obligation」, 「what one should do」, 「to make home」, 「to tie couple firmly」, 「means to overcome a period of lassitude」, 「token of love」, 「hope」, 「to avoid loneliness」, 「wanted to have a baby」, 「to provide for old ages」, 「to be a mother」, 「to achieve her desire through baby」. Finally, fourteen common factors were grouped under four higher categories. Five common factors, 「to maintain family」, 「instinct」, 「obligation」, 「what one should do」, 「to make home」 were grouped under〈custom〉. Three factors, 「to tie couple firmly」, 「means to overcome a period of lassitude」, 「token of love」 were grouped under 〈love between couple〉. Four factors, 「hope」, 「to avoid loneliness」, 「wanted to have a baby」, 「to provide for old ages」 were grouped under 〈pursuiting safety〉. Two factors, 「to be a mother」, 「to achieve her desire through baby」 were grouped under 〈self-fulfillment〉. At present, the most distinguishing motivation of childbearing was rooted in the cultural custom. Korean women thought that it was their duties to have children and children were necessary in life. But they were beginning to recognize that baby could tie couple more firmly and get rid of their loneliness. Korean women no longer considered their children as the one who would take care of them when they were old or who would satisfy their unmet needs. As pregnancy is not women's duty only, authors recommend further studies on men's view to pregnancy.

• Archives of Plastic Surgery
• /
• v.40 no.6
• /
• pp.711-714
• /
• 2013

Background The most common cause of skin graft failure is the collection of blood or serous fluid underneath the graft. In our study, we describe the use of silicone tube for tie-over dressing to secure the skin graft margins with the aim of decreasing loss of the skin graft, particularly in grafting of deep wounds. Methods Between March 2008 and July 2011, we used this technique in 17 patients with skin defects with depths ranging from 3.5 to 8 mm (mean, 5.5 mm). First, the skin graft was sutured with 3/0 silk suture material from its corners. Then, a silicone round drain tube was sutured with 3/0 absorbable polyglactin 910 over the margins of the graft. Finally, long silk threads were tied over the bolus dressing, and the tie-over dressing was completed in the usual fashion. Results The mean follow-up was 7 months (range, 2-10 months) in the outpatient clinic. Graft loss on the graft margins due to hematoma or seroma was not developed. The results of adhesion between the graft and wound bed peripherally was excellent. Conclusions In our study, we suggest that use of a silicone tube for additional pressure on the edges of skin grafts in case of reconstruction of deep skin defects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1630-1638
• /
• 2015

The finite element analysis has become an essential process to investigate the structural performance in many industry fields. In addition, the computer's performance is improving rapidly, but in large design problems, there is a limit to apply the optimal design techniques. For this, it is general to introduce a metamodel based optimization technique. The method to generate an approximate model can be classified into curve fitting and interpolation, and each representative one is response surface model and kriging interpolation method. This study proposes an ensemble model made of RSM and kriging to solve a structural design problem. The suggested method is applied to the designs of two bar and automobile outer tie rod.

• Structural Engineering and Mechanics
• /
• v.10 no.6
• /
• pp.589-601
• /
• 2000

A simplified analysis procedure utilizing the strut-tie modeling technique is developed to take a close look into the post-elastic deformation capacity of beam-column connections in ductile reinforced concrete frame structures. Particular emphasis is given to the effect of concrete strength decay and quantity and arrangement of joint shear steel. For this a fan-shaped crack pattern is postulated through the joints. A series of hypothetical rigid nodes are assumed through which struts, ties and boundaries are connected to each other. The equilibrium consideration enables all forces in struts, ties and boundaries to be related through the nodes. The boundary condition surrounding the joints is obtained by the mechanism analysis of the frame structures. In order to avoid a complexity from the indeterminacy of the truss model, it is assumed that all shear steel yielded. It is noted from the previous research that the capacity of struts is limited by the principal tensile strain of the joint panel for which the strain of the transverse diagonal is taken. The post-yield deformation of joint steel is taken to be the only source of the joint shear deformation beyond the elastic range. Both deformations are related by the energy consideration. The analysis is then performed by iteration for a given shear strain. The analysis results indicate that concentrating most of the joint steel near the center of the joint along with higher strength concrete may enhance the post-elastic joint performance.