• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.9
• /
• pp.279-292
• /
• 2014

Energy aware server cluster aims to reduce power consumption at maximum while keeping QoS(quality of service) as much as energy non-aware server cluster. In the existing methods of energy aware server cluster, they calculate the minimum number of active servers needed to handle current user requests and control server power mode in a fixed time interval to make only the needed servers ON. When loads change rapidly, QoS of the existing methods become degraded because they cannot increase the number of active servers so quickly. To solve this QoS problem, we classify load change situations into five types of rapid growth, growth, normal, decline, and rapid decline, and apply five different thresholds respectively in calculating the number of active servers. Also, we use a flexible scheme to adjust the above classification criterion for multi threshold, considering not only load change but also the remaining capacity of servers to handle user requests. We performed experiments with a cluster of 15 servers. A special benchmarking tool called SPECweb was used to generate load patterns with rapid change. Experimental results showed that QoS of the proposed method is improved up to the level of energy non-aware server cluster and power consumption is reduced up to about 50 percent, depending on the load pattern.

• The Korean Journal of Applied Statistics
• /
• v.33 no.4
• /
• pp.395-407
• /
• 2020

Most classification accuracy measures for optimal threshold are divided into two types: one is expressed with cumulative distribution functions and probability density functions, the other is based on ROC curve and AUC. Unal (2017) proposed the index of union (IU) as an accuracy measure that considers two types to get them. In this study, ten kinds of accuracy measures (including IU) are divided into six categories, and the advantages of the IU are studied by comparing the measures belonging to each category. The optimal thresholds of these measures are obtained by setting various normal mixture distributions; subsequently, the first and second type of errors as well as the error sums corresponding to each threshold are calculated. The properties and characteristics of the IU statistic are explored by comparing the discriminative power of other accuracy measures based on error values.The values of the first type error and error sum of IU statistic converge to those of the best accuracy measures of the second category as the mean difference between the two distributions increases. Therefore, IU could be an accuracy measure to evaluate the discriminant power of a model.

• KDI Journal of Economic Policy
• /
• v.31 no.2
• /
• pp.1-13
• /
• 2009

The monetary model suggests that nominal exchange rates between two countries will be determined by important macroeconomic variables. The existence of a cointegrating relationship among these fundamental variables is the backbone of the monetary model. In a recent paper, Rapach and Wohar (2002, Journal of International Economics) advance the literature by testing for linear cointegration in the monetary model using a century of data to increase power. They find evidence of cointegration in five or six of ten countries. We extend their work to the nonlinear framework by performing threshold cointegration tests that allow for asymmetric adjustments in two regimes. Asymmetric adjustments in exchange rates can occur, for example, if transactions costs are present or if policy makers react asymmetrically to changing fundamentals. Moreover, whereas Rapach and Wohar (2002) found it necessary to exclude the relative output variable in some cases to maintain the validity of their cointegration tests, we can include this variable as a stationary covariate to increase power. Overall, using their same long-span data, we find more support for cointegration in a nonlinear framework.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.2
• /
• pp.61-67
• /
• 2006

We fabricate local damascene FinFET cell array in sub-60nm feature sized DRAM. The local damascene structure can remove passing-gate-effects in FinFET cell array. p+ boron in-situ doped polysilicon is chosen for the gate material, and we obtain a uniform distribution of threshold voltages at around 0.7V. Sub-threshold swing of 75mV/d and extrapolated off-state leakage current of 0.03fA are obtained, which are much suppressed values against those of recessed channel array transistors. We also obtain a few times higher on-state current. Based on the improved on- and off-state current characteristics, we expect that the FinFET cell array could be a new mainstream structure in sub-60nm DRAM devices, satisfying high density, low power, and high-speed device requirements.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.628-628
• /
• 2015

유역의 형상은 강우, 산사태 등과 같은 지배적인 침식작용과 더불어 지형 지질학적 요인들에 의해 결정되어 진다. 그러므로 유역형상에 대한 공간특성 분석을 위해서는 지형학적 요인과 다양한 침식작용에 대한 분석이 필요하다. 국내 외 많은 연구결과에 의하면 지형학적 인자에 의한 침식 형태는 국부경사와 집수면적의 크기에 의해 다양한 구간으로 나뉘며, 그 특성에 따라 지표침식, 세굴, 산사태 등으로 구분되는 것으로 연구된 바 있다. 일례로 유역 내 세굴과 관련된 지배인자는 집수면적보다는 국부경사에 반대로 지표침식, 산사태는 국부경사보다는 집수면적의 크기에 따라 영향을 받는다. 따라서 지형학적 인자(국부경사, 집수면적)의 임계치(threshold) 산출을 통해 침식특성(불안정지역)을 검토할 수 있으며, 이에 대한 물리적 검증은 여러 연구를 통해 물질플럭스(유량, 에너지)에 대한 Power Law로써 검증된바 있다. 본 연구에서는 이러한 지형학적 침식특성 분석을 위하여 2006년 집중호우에 의해 광역적 산사태가 발생한 강원도 평창군 진부면 일대의 $10m{\times}10m$ DEM로부터 국부경사, 집수면적을 산출하고 경사-면적한계곡선(Slope-Area Threshold Curve, SATC), 배수면적 확률분포곡선(Probability distribution of Drain Areas Curve, PDAC), 에너지지수 확률분포곡선(Probability distribution of Energy Index Curve, PEIC)를 실제 산사태지점과 중첩하여 도시하였다. 그 결과, 특정 임계구간(Threshold Area, Unstable area, 2~3권역)내에서 산사태 발생지점이 분포하는 것으로 분석되었다. 이를 통해 지형학적 인자만을 고려하여 미계측 유역에 대한 잠재적 불안정지역의 판별이 가능할 것으로 판단되며, 추후 광역적 사면안정해석에 적용 가능할 것으로 판단된다.

• PNF and Movement
• /
• v.19 no.3
• /
• pp.413-422
• /
• 2021

Purpose: This study was conducted to investigate changes in the cervical and lumbar flexion-relaxation ratio, range of motion, pressure pain threshold, and perceived comfort following the wearing of a trunk brace during smartphone watching. Methods: To calculate the number of subjects for this study, an analysis with G^*Power was performed at a statistical power of 0.8, an effect size of 0.5, and a significance level of 0.05, based on the results of a preliminary experiment on five subjects. In total, 27 adult men and women were recruited who had been informed of the study's purpose and process and had agreed to participate. All subjects watched content on a smartphone for 20 minutes in the same posture and conditions while wearing and not wearing a trunk brace, and then their cervical and lumbar flexion-relaxation ratio, range of motion, pressure pain threshold, and perceived comfort were measured. Results: Compared to the non-wearing of a trunk brace, the wearing of a trunk brace resulted in a statistically significant smaller decline in cervical extension and right-side cervical rotation (p<0.05). When the subjects wore a trunk brace, their right- and left-side cervical and right-side lumbar pressure pain statistically significantly improved when compared to not wearing a trunk brace (p<0.05). They also perceived a significantly lowered level of comfort 20 minutes after wearing a trunk brace compared to immediately after wearing it (p<0.05). Conclusion: The trunk brace was effective in reducing declines in right-side cervical rotation and the occurrence of left- and right-side cervical and right-side lumbar pressure pain. The findings indicate the need to improve the perceived comfort of trunk braces.

• Journal of electromagnetic engineering and science
• /
• v.10 no.2
• /
• pp.50-55
• /
• 2010

Orthogonal Frequency Division Multiplexing(OFDM) dual-hop systems can take full advantages of the techniques of both multi-hop communication and OFDM. To achievethis end, we propose a joint subcarrier matching, power allocation and bit loading algorithm operating under a total power constraint and the same Bit Error Rate(BER) threshold over all subcarriers. Simulation results demonstrated system throughput improvement compared to single-hop systems and dual-hop systems with different bit loading algorithms for each relay position, power constraint, and required BER.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.148-155
• /
• 2008

We investigated the damage effects of microcontroller devices under high power electromagnetic(HPEM) wave. HPEM wave was radiated from the open-ended standard rectangular waveguide(WR-340) to free space. The influence of different reset-, clock-, data-, and power supply-line lengths has been tested. The susceptibility of the tested microcontroller devices was in general much influenced by clock-, reset-, and power supply-line length, little influenced by data-line length. Further the line length was increased, the malfunction threshold was decreased as expected, because more energy couples to the devices. The surfaces of the destroyed microcontroller devices were removed and the chip conditions were investigated with microscope. The microscopic analysis of the damaged devices showed component and bondwire destructions such as breakthroughs and melting due to thermal effects.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.7
• /
• pp.37-45
• /
• 1998

A 32-b self-timed parallel carry look-ahead adder (PCLA) designed for 0.5.mum. single threshold low power CMOS technology is demonstrated to operate with 2.7nsec delay at 8mW under 1V power supply. Compared to static PCLA and DPL adder, the self-timed PCLA designed with NORA logic provides the best performance at the power consumption comparable to other adder structures. The wave pipelined clock control play a crucial role in achieving the low power, high performance of this adder by eliminating the unnecessary power consumption due to the short-circuit current during the precharge phase. Th enoise margin has been improved by adopting the physical design of staic CMOS logic structure with controlled transistor sizes.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.254-255
• /
• 2014

RF magnetron sputtering법으로 증착한 비정질 IGZO 박막과 이를 Active layer로 이용한 TFT의 Transfer 특성에 대한 RF Power의 영향에 대해 연구하였다. Carrier concentration은 Sputtering 공정 중에 산소 분압으로 조절하였다. RF Power가 75에서 150W로 증가할수록 IGZO 박막의 Roughness는 12.2에서 $6.5{\AA}$ 감소하였고 Density는 6.0에서 $6.1g/cm^3$로 증가하였다. 또한, 모든 IGZO 박막은 가시광 영역에서 85% 이상의 투과율을 보였고 Optical band gap은 미세하게 감소하였다. RF Power가 증가할수록 a-IGZO TFT의 Threshold voltage는 0.9에서 7V로 증가하였고, Subthreshold slope은 0.3에서 0.8 V/decade로 증가하였다. 하지만 Mobility는 11에서 $19cm^2/V{\cdot}s$로 증가하였다.