• 한국운동역학회지
• /
• 제13권3호
• /
• pp.265-276
• /
• 2003

The objective of this research is to provide basic data for improving athletic performances, suggesting methods that can be utilized at games and coaching movements in the snatch, by analyzing the level of contribution of muscles to the movements of the snatch lift through three-dimensional imaging and EMG analysis between skilled and unskilled lifters. To this end, three high school students (the skilled group), three middle school student (the unskilled group) were selected; two digital video cameras and electromyography were used. The muscles measured by an EMG include gastrocnemius muscle, biceps femoris muscle, erector spinae, latissimus dorsi muscle, trapezius muscle, and brachioradialis. Based on the Ariel Performance Analysis System (APAS) program, the results of the analysis are summarized as follows. 1. In performing snatch pulls, the skilled lifters were found to simultaneously move the weight centers of the body and the barbell close to vertical, close to the shoulders in the pulling portion; in snatching and grabbing the barbell from a sited position, it was observed that the shorter the time for adjusting to change in the height of the barbell by using rotational inertia, the better it is to perform the movements. 2. The skilled lifters were observed to perform stable and efficient movements in grabbing the bar in a sited position, by moving the barbell and weight center of the body close to vertical and moving the shoulder joint under the bar fast. 3. The results of the EMG analysis of the entire movements from the snatching portion to the portion of grabbing the bar in a sited position show that when the skilled lifters lifted the barbell vertically during the pulling portion, their shoulder joints were extended to put more weight on biceps femoris muscle and brachioradialis; and in snatching and grabbing the bar from a sited position, it was found desirable to increase the myoelectrical activity of erector spinae in order to achieve a balance in the movements of the hip joint between font and rear, as the weight centers of the body and the barbell move higher. On the other hand, the unskilled lifters were found that in response to change in posture, they increase their muscular strength inefficiently in performing the movements throughout the entire lifting process.

• 전자공학회논문지B
• /
• 제29B권7호
• /
• pp.52-61
• /
• 1992

본 논문은 단시안에 투영된 3차원 물체의 Image에서 측정된 명암강도의 차이를 이용하여 3차원 물체의 절대거리 z 및 형상을 유출하는 수치적인 방법을 연구, 단시안에 의해서도 Camera와 물체사이의 3차원 절대거리가 구해질 수 있음을 보여주고 있다. 기발표된 이론과는 다르게 본 논문에서는 점광원을 이용하여 투영된 명암강도와 3차원 물체의 절대거리 및 형상과의 관계를 물체가 Uniform Lambertian이라는 가정하에서 새로운 관계식으로 정립하였다. 정립된 Non-Linear 관계식은 Smoothness 조건아래 $'Calculus of Variation$'방법을 사용하여 수학적 Algorithm으로 정리되어 Programming 되었고 간단한 실험방법을 이용하여 실제 Data에 적용시켜 그 타당성을 조사하였다.당성을 조사하였다.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.181-189
• /
• 2005

To know the proper impact posture and changes for the various clubs, changes of impact variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed video cameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. Major findings of this study were as follows. 1. Lateral position of the head remained more right side of the target up to 3.5cm compared to the setup as the length of the club increased. 2. Left shoulder raised up to 5cm and right shoulder lowered up to 2.5cm compared to setup. The shoulder line opened slightly (maximum 11 degrees) to the target line. 3. Forward lean angle of the trunk decreased up to 4 degrees (more erected) compared to setup. 4. Side lean angle of the trunk increased compared to setup and increased up to 16 degrees as the club length increased. 5. The pelvis moved to the target line direction horizontally and opened up to 31 degrees. Right hip moves laterally to the grip position at the setup. 6. Flexion of the left leg maintained almost constantly but the right leg flexed up to 11 degrees compared to setup. 7. Left arm is straightened but the right arm flexed about 20degrees compared to straight. 8. Center of the shoulders were in front of the knees and toes of the feet. 9. Hands moved to the left (8.7cm), forward (5.7cm) and upward (11.6cm) compared to the setup. This is because of the rotation of pelvis and shoulders. 10. Shaft angle to the ground was smaller than the lie angle of the clubs but it increased close to the lie of the clubs at impact.

• 천문학논총
• /
• 제32권3호
• /
• pp.381-405
• /
• 2017

We give a detailed description of the installation and operation of a double-station meteor detection system which formed part of a research & education project between Korea Astronomy Space Science Institute (KASI) and Daejeon Science Highschool. A similar system is currently not existing in South Korea. A total of six light-sensitive CCD cameras were installed with three cameras at SOAO and three cameras at BOAO observatory. A double-station observation of a meteor event enables the determination of the three-dimensional heliocentric orbit in space. This project was initiated in response to the Jinju fireball event in March 2014. The cameras were installed in October/November 2014. The two stations are identical in hardware as well as software. Each station employes sensitive "Watec-902H2" cameras in combination with relatively fast f/1.2 lenses. Various fields of views were used for measuring differences in detection rates of meteor events. We employed the SonotaCo UFO software suite for meteor detection and their subsequent analysis. The system setup as well as installation/operation experience is described and first results are presented. We also give a brief overview of historic as well as recent meteor (fall) detections in South Korea. For more information please consult http://meteor.kasi.re.kr.

• 한국게임학회 논문지
• /
• 제5권2호
• /
• pp.3-9
• /
• 2005

인터렉티브 리얼 타임 3D(Interactive real-time 3D)는 유저가 가상의 3차원 세계를 탐색하고 또한 몰입하는 폼의 컨텐츠를 경험할 수 있게 해준다. 다른 매체와는 다르게, 인터렉티브 리얼 타임 3D의 사용자(user)는, 디지털 3D의 구조에서의 작용과 반작용이 즉시 일어나는 "실시간"에서 진행되는 프로세스에서 능동적인 역할을 수행한다.

• 한국운동역학회지
• /
• 제15권1호
• /
• pp.1-18
• /
• 2005

The purpose of this study was to evaluate performance characteristics. in the success of team attack during volleyball competition. For this, real game was analyzed using S-VHS video camera for three dimensional cinematography. The contents of this research were receive to set time, set to spike time, setter moving distance, ball position during set and attacker's relative ball position during jump and spike, and open area at spike. Among the various kinematical factors considered in this study, the ball height relative spiker and open area were found to be related to offensive performance. This finding implies that although their direct impact were not significant the other factors could have indirect impact on offensive performance by increasing open area. Thus, receiver, setter, assistant attacker, and main attacker should practice for successful performance in each stage. Lastly, it is necessary to develop kinematic variables to evaluate performance characteristics of players. Further study may consider the best defense position against the attack of the opponent player.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.15-26
• /
• 2003

This study was conducted to investigate the performance times, CM position and CM speed, pole chord length and pole chord angle, whole body angular momentum(X axis), and grip width in pole vault event according to the event and phase; touch down, pole plant, take-off, maximum pole bending pole straight, pole release, peak height, and foot contact, pole contact, free flight. The pole vaulting of four male elite vaulters including six trial were filmed using two video digital cameras at 60 Hz at 56th national athletic match, and data were collected through the DLT method of three dimensional cinematography. In general the better jumper is, the longer the performance time is. And the greater CM speed is, and the better his transformation ability of CM horizontal speed into vertical speed is. As he uses a longer pole, his grip is higher, and it is a enough for him to rock back his body, so that he pulls and pushes the pole well keeping his hips close to. An greater maximum angular momentum and early positioning of the hips parallel to the bar makes his body far side of the bar and his bar clearance easier. Specially our national jumper needs to have more powerful braking force during foot contact phase, and take his body on the pole after maximum pole bending, and pull and push the pole strongly keeping his hips close to. Also he needs to have stronger muscular strength in order to control the longer pole and use the pole of proper tension more efficiently.

• 한국운동역학회지
• /
• 제22권2호
• /
• pp.131-140
• /
• 2012

This study was to investigate the relationship between the distance and projection factors, angle factors of javelin in women's javelin throwing. The data were collected in the 2011 National Sports Festivals for 11 players. Three-Dimensional motion analysis using a system of 4 video cameras at a sampling frequency of 60 fields/s was performed for this study. The factors of release conditions calculated using Matlab 2009a program. The statical analysis on the records(n=42) included mean and standard deviation of the mean(SD), Pearson's product moment correlation coefficient(SPSS Version 16.0 for Windows). There was a statistically significant positive relationship between the records and release velocity(r=.866, p<.01), height(r=.433, p<.01) and height rate(r=.340, p<.05). The attitude angle, release angle, and attack angle showed not a statistically significant relationship between the records. The medial-lateral tilt angle of javelin showed not a statistically significant relationship between the records, but the yaw angle of javelin(r=.549, p<.01) showed a statistically significant positive relationship between the records.

• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.58-67
• /
• 2000

Electron gun heaters are used to heat a cathode in video(TV) monitors. Major defects of the electron gun heaters include dimensional inaccuracy and pollution with dirty materials. In this paper, to save the labor and time being taken to inspect the heaters, a machine vision system is considered. For the system, a new algorithm is developed to measure the 9 different dimensions of each heater and to detect polluted defects. The algorithm consists of three stages. In the first stage, the center of the heater image is obtained and then its boundary detection is performed. For the efficient boundary detection, a mask called the sum mask is used. In the second stage of the algorithm, a set of fiducial points are determined on the boundary image. Finally, using the fiducial points specified dimensions are measured and the amount of polluted area is computed in the third stage. The performance of the algorithm is evaluated for a set of real specimens. The results indicate that measurements obtained by the algorithm satisfy the tolerance limits fur most of the dimensions and the algorithm detects the polluted defects successfully.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.600-605
• /
• 2002

The keyhole formed by high energy density laser-material interaction periodically collapses due to surface tension of the molten metal in partial penetration welds. The collapse sometimes traps a void at the bottom of the keyhole, and it remains as welding defects. This phenomenon is seen as one cause of the instability of the keyhole during laser beam welding. Thus, it seems likely that improving the stability of the keyhole can reduce voids and uniform the penetration depth. The goal of this work is to develop techniques for controlling laser weld keyhole dynamics to reduce weld defects such as voids and inconsistent penetration. Statistical analysis of the penetration depth signals in glycerin determined that keyhole dynamics are chaotic. The chaotic nature of keyhole fluctuations and the ability of laser power modulation to control them have been demonstrated by high-speed video images of laser welds in glycerin. Additionally, an incident leading beam angle is applied to enhance the stability of the keyhole. The quasi-sinusoidal laser beam power of 400Hz frequency and 15$^{\circ}$ incident leading beam angle were determined to be the optimum parameters for the reduction of voids. Finally, chaos analyses of uncontrolled signals and controlled signals were done to show the effectiveness of modulation on the keyhole dynamics. Three-dimensional phase plots for uncontrolled system and controlled system are produced to demonstrate that the chaotic keyhole dynamics is converted to regular periodic behavior by control methods: power modulation and incident leading beam angle.