• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.3
• /
• pp.211-219
• /
• 2008

A three-dimensional inviscid flow solver has been developed based on unstructured meshes for the investigation of the effect of the external stores on the tail surfaces of a generic fighter aircraft. The numerical method is based on a vertex-centered finite-volume discretization and an implicit point Gauss-Seidel time integration. The calculations were made for a steady flow and the computed results were compared with experimental data to validate the flow solver. An unsteady time-accurate computation of the generic fighter aircraft with external stores at transonic flight conditions showed that the external stores cause unsteady loading on the horizontal tail surface due to the mutual interference between their wake and the horizontal tail surface. It was shown that downward deflection of the trailing edge flap significantly reduces the undesirable interference effect.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.4
• /
• pp.185-191
• /
• 2004

A mooring system can be applied to keep the position of a floating structures. In this study, the structural analysis is carried out to analyze the dynamic characteristics of a mooring line for a floating breakwater. A three-dimensional equations of motion for a submerged chain are derived. Bending stiffness is considered for the necessary restoring force in the regions of zero tension. A fortran program is to be developed by employing finite difference method. In the algorithm, an implicit time integration and Newton-Raphson iteration are adopted. The results of simulation show good agreement in tension response pattern with the experimental results of a reference. The results of this study can contribute for the design of mooring system for a floating breakwater.

• Journal of Korean Medical classics
• /
• v.26 no.4
• /
• pp.253-266
• /
• 2013

Objective : There was no attempt to understand Moving Energy between two kidneys(腎間動氣) and Kidney on Left & Life Gate on Right(左腎右命門) by integration progress. So I have faced to study based on two parts with concerning as clues. One is 'Life Right (左 右)' and the other is 'Between(間)'. Methods : Revealing the source of the origin, Nanjingbenyi(難經本義) is given on the basis. Take a close look at publications related to Nanjing(難經) which is about Kidney on Left & Life Gate on Right and Moving Energy between two kidneys. Take a close look at Kidney, the Life Gate and Moving Energy between two kidneys. Look see the three-dimensional uplift movement of Gi(氣). Results : In Neijing(內經) and Nanjing, the basic point of view for Kidney is the same. That is explained in line with attributes of convergence(收斂). 'Life Gate(命門)' is a term to express the divergence feature(發散機能) of kidney. Moving Energy between two kidneys is used to mean the mainspring of human body activity. The Gi in human body loses altitude turning left(左旋而下降) and gains height turning right(右旋而上升). Conclusion : Watching on functional aspect, there are two names for kidney. One is 'Kidney(腎)' which collects the losing altitude turning left and the other is 'Life Gate' which rises turning right. Moreover, the fundamental power that effectuate the uplift movement is Moving Energy between two kidneys. This kind model is a way that can be understood syntagmatically the Kidney on Left & Life Gate on Right and the Moving Energy between two kidneys without any gainsaying the original of Nanjing.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.68-79
• /
• 2008

Ground vehicle borne system which is named RoSSAV(Road Safety Survey and Analysis Vehicle) developed in KICT(Korea Institute of Construction Technology) can collect road geometric data. This system therefore is able to evaluate the road safety and analyze road deficient sections using data collected along the roads. The purpose of this study is to extract road geometric data for 3D road modeling in dangerous road section and The system should be able to quickly provide more accurate data. Various sensors(circular laser scanner, GPS, INS, CCD camera and DMI) are installed in moving object and collect road environment data. Finally, We extract 3d road geometry(center, boundary), road facility and slope using integrated multi-sensor data.

• The Journal of Bigdata
• /
• v.4 no.1
• /
• pp.53-61
• /
• 2019

The extracellular matrix, which provides the structural and biochemical support of surrounding cells, is a cell physiological modulator that controls cell division and differentiation. In the bio sector, the company produces Scapold, a three-dimensional support for tissue engineering, and cultivates stem cells in the produced Scapold to be transplanted into animals to assess tissue regeneration. This depends on components such as collagen in the tissue. Therefore, it is very important to identify the inclusion rate and distribution of components in the tissue, and the data are obtained by analyzing the color of the dyed tissue image. The process from image collection to analysis is costly, and the data collected and analyzed are managed in different formats by different research institutions. Therefore, data integration management and analysis results search are not being performed. In this paper, we establish a database that can manage relevant bigdata in an integrated manner, and propose a bio-image integrated management and retrieval system that can be searched based on color, an important analytical measure in this field of study.

• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.22-29
• /
• 2001

This paper represents axial mean velocity, turbulent kinetic energy and swirl number based on momentum flux measured in the X-Y plane and Y-Z plane respectively of a cone type gas swirl burner by using X-probe from the hot-wire anemometer system. This experiment is carried out at flow rates 350 and $450{\ell}/min$ respectively, which are equivalent to the combustion air flow rate necessary for heat release 15,000 kcal/hr in gas furnace, in the test section of a subsonic wind tunnel. Axial mean velocities and turbulent kinetic energies show that their maximum values exist centering around narrow slits situated radially on the edge of and in the forefront of a burner until $X/R{\fallingdotseq}1.5$, but they have a peculiar shape like a starfish diffusing and developing into inward and outward of a burner by means of the mixing between flows ejected from narrow slits, an inclination baffle plate and swirl vanes respectively according to downstream regions. Moreover, they show a relatively large value in the inner region of 0.5$S_m$ obtained by integration of velocity profiles shows a characteristic that has an inflection point composing of the maximum and minimum value until X/R<3, but shows close agreement with the geometric swirl number after a distance of X/R=3.

• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.129-136
• /
• 2017

3D seismic data processing methods such as full waveform inversion or reverse-time migration require 3D wave propagation modeling and heavy calculations. We compared efficiency and accuracy of a Xeon Phi coprocessor to those of a high-end server CPU using 3D frequency-domain wave propagation modeling. We adopted the OpenMP parallel programming to the time-domain finite difference algorithm by considering the characteristics of the Xeon Phi coprocessors. We applied the Fourier transform using a running-integration to obtain the frequency-domain wavefield. A numerical test on frequency-domain wavefield modeling was performed using the 3D SEG/EAGE salt velocity model. Consequently, we could obtain an accurate frequency-domain wavefield and attain a 1.44x speedup using the Xeon Phi coprocessor compared to the CPU.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.214-217
• /
• 2004

In this paper, a Ka-band LTCC (low temperature co-fired ceramic) narrow bandpass filter (BPF) is firstly presented. This BPF shows very narrow 3dB fractional bandwidth of 4.5 ％ centered at 28.7㎓. The advantages of multi-layered LTCC technology such as high integration and vertical stacking capabilities were employed to design three-dimensional interdigital end-coupled embedded microstrip narrow BPF. The difficulties in controlling the precise distance between two adjacent resonators in LTCC end-coupled BPF were overcome by locating the resonators on different layers. The measured insertion loss is 3dB at 28.7㎓, pass band is from 27.9 ㎓ to 29.2 ㎓, and the return loss in the pass band is less than 10 dB.

• Journal of Biomedical Engineering Research
• /
• v.23 no.4
• /
• pp.301-308
• /
• 2002

This research was performed to analyze quantitatively how spiritual stress affects some ERPs on human through sight stimulus after the settlement of visual and auditory integration environment in three dimension space. We measured ERPs in the normal state and spiritual stress sessions separately. The subjects were 10 normal men and women and vital signs was recorded from Fpl, Fz, Cz, Pz, O1, O2's scalps. The experiment was done in isolated room where electro-magnetic effect do not affect. The result showed that P300's amplitude was a little higher under stress session and latent period in this resulted in longer time. We recorded through voltage variation the activity of brain which is in charge of human's perception. cognition, process of action and evaluated the effect of spiritual stress. We expected that the result of this research can be used to evaluate the malfunction of brain.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.9 no.2
• /
• pp.25-45
• /
• 2003

Sling exercise treatment(S-E-T) is a therapeutic exercise based on scientific studies for the purpose of treating musculoskeletal or neurological disorders thereby improving strength, endurance, and skills for sensory-motor integration. Exercise resistance and intensity can be modified in various ways by changing the length of rope, patient position, therapist's manual resistance, and using elastic rope. The therapist can also progress to successively higher levels of exercise resistance and intensity by changing the position of the hanging point: the subject of this article. In brief, there are three axial components in S-E-T; hanging point, motor axis, and suspension point. The hanging point can be changed in several ways in relation to the joint; axial, superior, inferior, medial, and posterior hanging points. The position of the hanging point affects the amount of load on agonist and antagonist muscles as well as on the range of motion. To create an advanced exercise program, selection of hanging point can be two-dimensional such as superior-lateral or anterior-medial. Therapists, therefore, can freely but carefully select the best hanging point based on the purpose of the exercise and their level of knowledge in S-E-T.