• 대한토목학회논문집
• /
• 제31권2B호
• /
• pp.175-185
• /
• 2011

본 연구에서는 복수의 육상구조물군에 작용하는 지진해일파력을 Navier-Stokes solver에 기초한 3차원혼상류해석법으로부터 수치적으로 검토하였다. 특히, 육상구조물의 배치형상과 호안에서의 이격거리 등에 따른 지진해일파력의 특성을 수치실험을 통해 조사하였다. 육상구조물군에 작용하는 지진해일파력에 대한 기존의 수리실험결과와 비교 및 분석하여 본 3차원수치해석의 적용성을 검토하였다. 그리고, 육상구조물에 작용하는 지진해일파력의 추정을 위해 정수압적인 방법과 동수압적인 방법을 각각 적용하여 기존실험결과 및 설계기준과의 비교를 통하여 3차원수치해석의 유용성을 검토하였으며, 기존실험결과와 수치해석결과를 동시에 고려하여 동수압적인 추정법에 관한 회귀식을 제안하였다. 이로부터 육상구조물에 작용하는 지진해일 파력의 산정에 관한 본 수치해석의 유용성을 확인할 수 있었다.

• Ocean Systems Engineering
• /
• 제13권2호
• /
• pp.147-172
• /
• 2023

This study investigates the influence of loading and inflow conditions on tidal turbine performance from a hydrodynamic and hydroacoustic point of view. A boundary element method is utilized for the former to investigate turbine performance at various loading conditions under zero/non-zero yaw inflow. The boundary element method is selected as it has been selected, tested, and validated to be computationally efficient and accurate for marine hydrodynamic problems. Once the hydrodynamic solutions are obtained, such as the time-dependent surface pressures and periodic motion of the turbine blade, they are taken as the known noise sources for the subsequence hydroacoustic analysis based on the Ffowcs Williams-Hawkings formulation given in a form proposed by Farassat. This formulation is coupled with the boundary element method to fully consider the three-dimensional shape of the turbine and the speed of sound in the acoustic analysis. For validations, a model turbine is taken from a reference paper, and the comparison between numerical predictions and experimental data reveals satisfactory agreement in hydrodynamic performance. Importantly, this study shows that the noise patterns and sound pressure levels at both the near- and far-field are affected by different loading conditions and sensitive to the inclination imposed in the incoming flow.

• 물과 미래
• /
• 제16권4호
• /
• pp.221-236
• /
• 1983

황해 및 동지나해와 같은 천해에서 해류 및 해면변화의 주요인은 조석이다. 근년에 수직적분된 운동방정식 및 연속방정식을 기초로 한 황해 및 동지나해의 이차원 수동역학적 수치 모델이 개발되어 조석의 주분호의 진폭, 위상을 만족스러운 정도로서 재현할 수 있었으며 일련의 수치실험에 의해 이 해역의 조석역학을 이해하는 데 필요한 자료를 제공하였다. 다음 단계로서 황해 및 동지나해의 삼차원 수동역학적 수치모델이 수립되어 조류와 정상 균일풍에 의한 해류의 수직분포가 산정되었으며 그 결과가 토의되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.600-605
• /
• 2009

A general purpose viscous flow solver Ansys CFX is used to study a Savonius type wave energy converter in a 3D numerical viscous wave tank. This paper presents the results of a computational fluid dynamics (CFD) analysis of the effect of blade configuration on the performance of 3 bladed Savonius rotors for wave energy extraction. A piston-type wave generator was incorporated in the computational domain to generate the desired incident waves. A complete OWC system with a 3-bladed Savonius rotor was modeled in a three dimensional numerical wave tank and the hydrodynamic conversion efficiency was estimated. The flow over the rotors is assumed to be two-dimensional (2D), viscous, turbulent and unsteady. The CFX code is used with a solver of the coupled conservation equations of mass, momentum and energy, with an implicit time scheme and with the adoption of the hexahedral mesh and the moving mesh techniques in areas of moving surfaces. Turbulence is modeled with the k.e model. Simulations were carried out simultaneously for the rotor angle and the helical twist. The results indicate that the developed models are suitable to analyze the water flows both in the chamber and in the turbine. For the turbine, the numerical results of torque were compared for all the cases.

• 해양환경안전학회지
• /
• 제22권4호
• /
• pp.335-343
• /
• 2016

마산만에서 수치모델을 이용하여 해파리의 시 공간적 분포를 파악하였다. 먼저 3차원 해수유동모델(POM)을 이용하여 조석, 바람, 수온 염분의 효과를 고려한 잔차류를 계산하였다. 마산만의 마산항, 중공업단지, 가포신항에서 발생한 해파리의 거동을 파악하기 위하여 잔차류에 의한 입자추적자 모델을 이용하였다. 해파리의 분포는 마창대교 북쪽해역에서 최대인 2,533 개체수가 나타났다. 이와 같은 현상은 잔차류의 다방향으로 혼재하는 흐름과 지형적인 영향으로 판단된다. 해파리의 이동에 영향을 미치는 잔차류가 우세한 해역에서 외력조건에 따른 해파리의 집적도를 알아보기 위해서 조석잔차류, 취송류, 밀도류의 유형별 수치실험을 하였다. 특히 마산만의 마창대교와 마산만 입구인 모도해역에서는 취송류(바람에 의한 효과)가 해파리의 집적에 탁월한 것을 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.66-72
• /
• 1999

A numerical simulation method has been under development for solving turbulent flows around a ship model in maneuvering motion using the Reynolds Averaged Navier-Stokes equations. The method used second-order finite differences, collocated grids, pressure-Poisson equation and four-stage Runge-Kutta scheme as key components of the solution method. A modified Baldwin-Lomax model is used for the turbulence closure. This paper presents a preliminary result of the computational study on turbulent flows past a ship model in drift motion. Calculations are carried out for a Series 60 $C_B=0.6$ ship model, for which detailed experimental data are available. The results of the present calculations are compared with the experimental data for hydrodynamic forces acting on the model as well as velocity distributions at longitudinal sections. Only fair agreements has been achieved. The computational results show the complex asymmetrical shear flow patterns including three-dimensional separations followed by formation of bilge vortices both in bow and stern regions.

• 한국해양학회지
• /
• 제20권1호
• /
• pp.56-73
• /
• 1985

黃海 및 東支那海의 三次元 水動力學的 數値모델이 기보고된 主太陰半日週潮 (M2)의 潮流分布(崔, 1984)에 附加하여 S$_{2}$, $K_{1}$, 및 $O_{1}$ 分潮의 水深에 따른 潮流分布를 算定하는데 利用되었다. 모델 結果는 近年의 美.中共 共同 海洋觀測 프로그램의 潮流觀測値( Larsem과 Cannon, 1983)와 比較檢討되었으며 또 한 S$_{2}$, $K_{1}$ 및 $O_{1}$ 分潮의 表層, 中間水深, 海底에서의 潮流 調和 常數 分布圖 및 潮流 圓圖로서 提示되었다.

• 한국물환경학회지
• /
• 제31권4호
• /
• pp.367-376
• /
• 2015

The momentum and kinetic turbulent energy carried by the wind to a stratified lake lead to basin-scale motions, which provide a major driving force for vertical and horizontal mixing. A three-dimensional (3D) hydrodynamic model was applied to Lake Tahoe, located between California and Nevada, USA, to simulate the dominant basin-scale internal waves in the deep lake. The results demonstrated that the model well represents the temporal and vertical variations of water temperature that allows the internal waves to be energized correctly at the basin scale. Both the model and thermistor chain (TC) data identified the presence of Kelvin modes and Poincare mode internal waves. The lake was weakly stratified during the study period, and produced large amplitude (up to 60 m) of internal oscillations after several wind events and partial upwelling near the southwestern lake. The partial upwelling and followed coastal jets could be an important feature of basin-scale internal waves because they can cause re-suspension and horizontal transport of fine particles from nearshore to offshore. The internal wave dynamics can be also associated with the distributions of water quality variables such as dissolved oxygen and nutrients in the lake. Thus, the basin-scale internal waves and horizontal circulation processes need to be accurately modeled for the correct simulation of the dissolved and particulate contaminants, and biogeochemical processes in the lake.

• 한국수자원학회논문집
• /
• 제44권6호
• /
• pp.429-438
• /
• 2011

In order to simulate a free surface flow in a trench channel, a three-dimensional incompressible unsteady Reynolds-averaged Navier-Stokes (RANS) equations are closed with the ${\kappa}-{\epsilon}$ model. The artificial compressibility (AC) method is used. Because the pressure fields can be coupled directly with the velocity fields, the incompressible Navier-Stokes (INS) equations can be solved for the unknown variables such as velocity components and pressure. The governing equations are discretized in a conservation form using a second order accurate finite volume method on non-staggered grids. In order to prevent the oscillatory behavior of computed solutions known as odd-even decoupling, an artificial dissipation using the flux-difference splitting upwind scheme is applied. To enhance the efficiency and robustness of the numerical algorithm, the implicit method of the Beam and Warming method is employed. The treatment of the free surface, so-called interface-tracking method, is proposed using the free surface evolution equation and the kinematic free surface boundary conditions at the free surface instead of the dynamic free surface boundary condition. AC method in this paper can be applied only to the hydrodynamic pressure using the decomposition into hydrostatic pressure and hydrodynamic pressure components. In this study, the boundary-fitted grids are used and advanced each time the free surface moved. The accuracy of our RANS solver is compared with the laboratory experimental and numerical data for a fully turbulent shallow-water trench flow. The algorithm yields practically identical velocity profiles that are in good overall agreement with the laboratory experimental measurement for the turbulent flow.

• 대한조선학회논문집
• /
• 제40권5호
• /
• pp.36-42
• /
• 2003

A CFD simulation technique has been developed to handle the unsteady body motion with large amplitude by use of overlapping multi-block grid system. The three-dimensional, viscous and incompressible flow around body is investigated by solving the Navier-Stokes equations, and the motion of body is represented by moving effect of the grid system. Composite grid system is employed in order to deal with both the body motion with large amplitude and the condition of numerical wave maker in convenience at the same time. The governing equations, Navier-Stokes (N-S) and continuity equations, are discretized by a finite volume method, in the framework of an O-H type boundary-fitted grid system (inner grid system including test model) and a rectangular grid system (outer grid system including simulation equipments for generation of wave environments). If this study, several flow configurations, such as an oscillating cylinder with large KC number, are studied in order to predict and evaluate the hydrodynamic forces. Furthermore, the motion simulation of a Series 60 model advancing in a uniform flow under the condition of enforced roll motion of angle 20$^{\circ}$ is performed in the developed numerical wave tank.