• 센서학회지
• /
• 제22권5호
• /
• pp.315-320
• /
• 2013

In this paper, the properties of strain sensors made of spin-capable multi-walled carbon nanotubes (MWCNTs) were characterized and their sensing mechanisms analyzed. The key contribution of this paper is a new fabrication technique that introduces a simpler transfer method compared to spin-coating or dispersion CNT. Resistance of the MWCNT sheet strain sensor increased linearly with higher strain. To investigate the effect of CNT concentration on sensitivity, two strain sensors with different layer numbers of MWCNT sheets (one and three layers) were fabricated. According to the results, the sensor with a three-layer sheet showed higher sensitivity than that with one layer. In addition, experiments were conducted to examine the effects of environmental factors, temperature, and gas on sensor sensitivity. An increase in temperature resulted in a reduction in sensor sensitivity. It was also observed that ambient gas influenced the properties of the MWCNT sheet due to charge transfer. Experimental results showed that there was a linear change in resistance in response to strain, and the resistance of the sensor fully recovered to its unstressed state and exhibited stable electromechanical properties.

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.601-610
• /
• 2007

Statement of problem: The adhesion between titanium and ceramic is less optimal than conventional metal-ceramic bonding, due to reaction layer form on cast titanium surface during porcelain firing. Purpose: This study characterized the effect of titanium-ceramic adhesion after gold and TiN coating on cast and wrought titanium substrates. Material and method: Six groups of ASTM grade II commercially pure titanium and cast titanium specimens$(13mm{\times}13mm{\times}1mm)$ were prepared(n=8). The conventional Au-Pd-In alloy served as the control. All specimens were sandblasted with $110{\mu}m\;Al_2O_3$ particles and ultrasonically cleaned for 5min in deionized water and dried in air before porcelain firing. An ultra-low-fusing dental porcelain (Vita Titankeramik) was fused on titanium surfaces. Porcelain was debonded by a biaxial flexure test at a cross head speed of 0.25mm/min. The excellent titanium-ceramic adherence was exhibited by the presence of a dentin porcelain layer on the specimen surface after the biaxial flexure test. Area fraction of adherent porcelain (AFAP) was determined by SEM/EDS. Numerical results were statistically analyzed by one-way ANOVA and Student-Newman-Keuls test at ${\alpha}=0.05$. Results: The AFAP value of cast titanium was greatest in the group 2 with TiN coating, followed by group 1 with Au coating and the group 3 with $Al_2O_3$ sandblasting. Significant statistical difference was found between the group 1, 2 and the group 3 (p<.05). The AFAP value of wrought titanium was greatest in the group 5 with TiN coating, followed by the group 4 with Au coating and the group 6 with $Al_2O_3$ sandblasting. Conclusion: No significant difference was observed among the three groups (p>.05). The AFAP values of the cast titanium and the wrought titanium were similar. However the group treated with $Al_2O_3$ sandblasting showed significantly lower value (p<.05).

• 반도체디스플레이기술학회지
• /
• 제3권3호
• /
• pp.37-40
• /
• 2004

This study presents numerical solutions of three-dimensional laminar flow-field formed by photo resist flow in a slit-coater model. We discuss on the governing equations, laminar viscosities and the computational model applied in our numerical calculation and some results. We prove that the structure of tapered-cavity aid to make uniform pressure-field and boundary effect is an important problem to improve coating uniformity. In view of uniformity improvement, it is necessary to study for the structure of cavity and flow path.

• 한국표면공학회지
• /
• 제28권4호
• /
• pp.199-206
• /
• 1995

A kinetic study on the electrodeposition of Ni-Zn-P ternary alloys onto a steel in chloride solutions was carried out using a rotating disc electrode. The coatings were characterized using SEM/EPMA and A. A. analysis. The results showed that the plating rates of three components were increased with applied potential, disc rotating speed and temperature. The activation energies of Ni, Zn and P of the coatings were 6.1, 5.1 and 8.0 kcal/mole respectively. Therefore, the deposition rates were controlled partly by surface electrochemical reaction and partly by mass transport. As the potential, temperature of bath and rotating speed of cathode disc were raised, the vol. % ratios of Ni and P of coating layer were increased but that of Zn decreased. The effect of coating parameters on the surface morphology was also examined.

• Structural Engineering and Mechanics
• /
• 제83권4호
• /
• pp.551-561
• /
• 2022

In this paper, the effect of fire conditions according to ISO 834 standard on the behavior of carbon fibre-reinforced plastic (CFRP) reinforced steel beams coated with gypsum-based mortar has been investigated numerically. To study the efficiency of these beams, 3D coupled temperature-displacement finite element analyzes have been conducted. Mechanical and thermal characteristics of three different parts of composite beams, i.e., steel, CFRP plate, and fireproof coating, were considered as a function of temperature. The interaction between steel and CFRP plate has been simulated employing the adhesion model. The effect of temperature, CFRP plate reinforcement, and the fireproof coating thickness on the deformation of the beams have been analyzed. The results showed that within the first 120 min of fire exposure, increasing the thickness of the fireproof coating from 1 mm to 10 mm reduced the maximum temperature of the outer surface of the steel beam from 380℃ to 270℃. This increase in the thickness of the fireproof layer decreased the rate of growth in the temperature of the steel beam by approximately 30%. Besides excellent thermal resistance and gypsum-based mortar, the studied fireproof coating method could provide better fire resistance for steel structures and thus can be applied to building materials.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.412-422
• /
• 1999

Scale defects generated on the strip surface in a tandem finishing mill line are collected from the strip trapped among the production mills by freezing the growing scale on the strip by the melt glass coating and shutting down the line simultaneously. The samples observed of its cross sectional figure showed the process of scale defect formation where the defects are formed at the base metal surface by thicker oxidized scale during each rolling passes. The properties of the oxidized layer growth both at rolling and inter-rolling are detected down sized rolling test simulating carefully the rolling condition of the production line. The thickness of the oxidized layer at each rolling pass are simulated numerically. The critical scale thickness to avoid the defect formation is determined through the expression of mutual relation between oxidized layer thickness and the lanks of the strip called quality for the scale defects. The scale growth of scale less than the critical thickness and also to keep the bulk temperature tuning the water flow rate and cooling time appropriately. Two units of Inerstand Cooler are designed and settled among the first three stands in the production line. Two units of scale defect is counted from the recoiled strip and the results showed distinct decrease of the defects comparing to the conventionaly rolled products.

• 보존과학회지
• /
• 제35권5호
• /
• pp.480-493
• /
• 2019

본 논문은 단청 포수 방법 중, 아교수와 교반수처리 방법에 대해 내후성 평가를 하여, 단청의 보존성 향상에 미치는 영향을 분석하였다. 시편은 아교수와 교반수(아교 건조중량의 명반 2%, 5%, 7%)의 점도와 pH 측정을 진행하였으며, 포수층 없음, 아교수 포수층, 교반수 포수층 등 3유형으로 분류 후, 각 저농도(2% 4회), 고농도(10% 1회)로 구분하였다. 이후 바탕층 형성유무에 따라 2차 분류 하여 뇌록·석간주·장단 3종의 가칠 안료를 채색하였다. 완성된 시편은 내후성 평가를 위해 환경변화실험을 진행하였으며, 실험 전·후 표면관찰, 색차변화 등을 분석하였다. 연구결과, 명반 5% 교반수(pH 평균 4.5)와 명반 7% 교반수(pH 평균 4.7)는 강산성에 근접하여 향후 단청의 보존에 영향을 미칠 수 있으며, 명반 7%의 높은 점도는 포수층을 견고하게 만들기 어려울 것으로 판단된다. 또한 자외선 조사 후, 명반 7% 시편에서 황변화가 가장 확연하게 나타났으며 흡습·건조 후, 시편 전체 표면에서 균열이 발견되어 물리적 변화를 확인하였다. 가스부식은 타 실험과 비교 시 색상과 표면상태 변화의 확인이 어려웠다. 결과적으로, 안정적인 포수층의 형성은 중성에 가까운 저농도 아교수와, 명반 2%의 교반수가 적합할 것이며, 명반 2% 교반수의 적용은 단청의 보존에 긍정적일 것으로 파악된다.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.269-279
• /
• 2021

In this study, the laminating of TPU film after coating of primer adhesive on the fabrics was applied in order to secure the strength to withstand a fall from a higher altitude by increasing the adhesion between the fabric and the film layer. It seems that the fineness of the yarn and the weave construction have a greater effect than the type of the laminating films. The order of superiority of the laminated fabrics by film type and thickness was the same for 1000 denier and 210 denier fabrics, and the tendency was consistent with the order of superiority in the film properties and peel strength tests. The tear strength of laminating fabrics increased three to four times for 1000 denier fabrics compared to the fabric alone, but it decreased by 2 times for the 210 denier fabrics. Summarizing the above results, it is most appropriate to combine 1000d fabric with three types of laminating films(100~200㎛ thickness) of A(0.2T) or B(0.15T) or D(0.1T) considering the air pressure resistance, the impact resistance during the fall, and the durability against damage during use.

• 멤브레인
• /
• 제25권5호
• /
• pp.422-430
• /
• 2015

본 연구에서는 silicalite-1 제올라이트 분리막 합성 시에 종결정 코팅용액 pH 변화가 제올라이트 분리층 미세구조에 미치는 영항을 고찰하였다. 75 nm 크기로 합성된 종결정은 에탄올에 분산된 후 침지코팅법으로 지지체 표면에 코팅되었으며 분산용액의 pH는 2.2, 7.0, 9.3으로 조절되었다. pH가 7인 경우, 균일하고 두께가 $3{\sim}4{\mu}m$인 silicalite-1 제올라이트 분리층이 형성되었고 분리층 결정입 크기는 100 nm로 미세하였다. 반면, pH가 2.2와 9.3인 경우, 분리층 두께가 얇고 불완전하였으며 분리층 결정입 크기도 약 $1{\mu}m$로 조대하였다. pH 7에서 완전한 제올라이트 분리층이 형성된 것은 침지코팅 중에 지지체와 종결정이 서로 다른 부호의 전하를 가져 정전기적 인력이 작용하여 균일하고 조밀하며 두껍고 다층의 종결정 코팅층이 형성되었기 때문이었다. 반면에 pH가 2.2와 9.3인 경우, 침지코팅 중에 지지체와 종결정이 서로 같은 부호의 전하를 가져 정전기적 반발력이 작용하기 때문에 불완전한 덮힘에 의하여 불완전한 분리층이 형성된다고 판단되었다. 결론적으로, 종결정 코팅용액의 pH가 silicalite-1 제올라이트 분리층의 두께, 결정립 크기 등 미세구조를 결정하는 중요한 인자임을 확인할 수 있었다.

• Journal of Pharmaceutical Investigation
• /
• 제38권3호
• /
• pp.177-182
• /
• 2008

The purposes of this study were to prepare dual-layered coated compact pellets containing three nutrients Glucose, Chromium picolinate, Vitamin C) for rumen bypass. The core compact pellets were prepared by an extrusionspheronization method and then double layered coated with pH independent EC (ethyl cellulose) and pH-dependent polymers ($Eudragit^{(R)}$ E100) using a fluid-bed spray coater. Depending on the coating levels of EC and $Eudragit^{(R)}$ E100, release profiles were variable in simulated rumen (pH 6.8) and abomasums (pH 2.0) fluid using USP apparatus I (basket method). When compact pellets were coated with EC (about 10% level in inner layer) and then $Eudragit^{(R)}$ E100 (20% level in outer layer) in a dual-layered manner, rumen-bypass delivery resisting rumen fluid followed by release in abomasums fluid could possible. The friability was also satisfactory based on chewing behavior of ruminants. The dual-layered coated compact pellets showed smooth surface and distinct inner/outer layers using scanning electron microscopy (SEM). The current rumen bypass delivery system can be also applicable to deliver other nutrients in ruminants.