• 가정과삶의질연구
• /
• 제32권2호
• /
• pp.13-26
• /
• 2014

The theory of planned behavior proposed by Ajzen predicts that certain behaviors are determined by behavioral intentions which are affected by an attitudinal belief toward the behavior, the subject norms, and the individual's perception of their control over the behavior. This study's aim is to examine consumers' inappropriate complaint behaviors, using the theory of planned behavior. Consumers' inappropriate complaint behaviors are defined by two types, which are low -and high-intensity inappropriate complaint behavior based on the primary data collected from a group of consumer affairs professionals in the business field. The survey questionnaire was administered to 1,000 consumers via an on-line survey. The two models were assessed with path analysis in order to predict consumers' inappropriate complaint behaviors, using the theory of planned behavior. The results are as follows: First, two types of inappropriate compliant behaviors were identified according to the results of an exploratory study conducted by professionals who had been employed at the department of consumer affairs. Second, the theory of planned behavior is adequately fitted to examine the factors related to consumers' inappropriate complaint behaviors. Also, all three variables based on the theory of planned behavior, -perceived behavior control, subjective norm, and attitude-had a significant effect on inappropriate complaint behavior intention. Third, consumers' inappropriate complaint behavior intention played the most significant role in low-intensity inappropriate complaint behavior, whereas attitude was found to play a significant role in high-intensity inappropriate complaint behavior. The significance and implication were discussed in terms of effective customer management strategies.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권4호
• /
• pp.458-467
• /
• 2012

In this study, the linear viscoelastic response of a rectangular laminated plate is investigated. The viscoelastic properties, expressed by two basic spring-dashpot models, that is Kelvin and Maxwell models, is assumed in the range to investigate the influence of viscoelastic coefficients to mechanical behavior. In the present study, viscoelastic responses are performed for two popular equivalent single-layered theories, such as the first-order shear deformation theory (FSDT) and third-order shear deformation theory (TSDT). Compliance and relaxation modulus of time-dependent viscoelastic behavior are approximately determined by Prony series. The constitutive equation for linear viscoelastic material as the Boltzmann superposition integral equation is simplified by the convolution theorem of Laplace transformation to avoid direct time integration as well as to improve both accuracy and computational efficiency. The viscoelastic responses of composite laminates in the real time domain are obtained by applying the inverse Laplace transformation. The numerical results of viscoelastic phenomena such as creep, cyclic creep and recovery creep are presented.

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.473-506
• /
• 2016

The aim of this work is the development of a 2D quadrilateral isoparametric finite element model, based on a layerwise approach, for the bending analysis of sandwich plates. The face sheets and the core are modeled individually using, respectively, the first order shear deformation theory and the third-order plate theory. The displacement continuity condition at the interfaces 'face sheets-core' is satisfied. The assumed natural strains method is introduced to avoid an eventual shear locking phenomenon. The developed element is a four-nodded isoparametric element with fifty two degrees-of-freedom (52 DOF). Each face sheet has only two rotational DOF per node and the core has nine DOF per node: six rotational degrees and three translation components which are common for the all sandwich layers. The performance of the proposed element model is assessed by six examples, considering symmetric/unsymmetric composite sandwich plates with different aspect ratios, loadings and boundary conditions. The numerical results obtained are compared with the analytical solutions and the numerical results obtained by other authors. The results indicate that the proposed element model is promising in terms of the accuracy and the convergence speed for both thin and thick plates.

• 한국정밀공학회지
• /
• 제29권12호
• /
• pp.1290-1295
• /
• 2012

Oblique astigmatism according to the rotation of the eye has to be removed for obtaining peripheral clear vision in ophthalmic lenses. For this reason, we calculated tangential and sagittal power using third-order approximation theory and then controlled conic constant for the difference of the two powers to converge to 0 regardless of the rotation angle of the eye. As a result, an aspherical ophthalmic lens without oblique astigmatism was designed. Also, we found optimal machining condition to the lens material using factorial design and finally fabricated the designed lens through ultra-precision machining with that condition.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.213-216
• /
• 2005

A novel hyperspectral imaging spectrometer controlling spatial and spectral resolution individually has been proposed. This imaging spectrometer uses a zoom lens as a telescope and a focusing element. It can change the spatial resolution fixing the spectral resolution or the spectral resolution fixing the spatial resolution. Here, we report the concept of the hyperspectral imaging spectrometer with the novel zooming function and the optical design of a zoom lens as the focusing element. By using lens module and third-order aberration theory, we have presented the initial design of four-group zoom lens with external entrance pupil. And the optimized zoom lens with a focal length of 50 to 150 mm is obtained from the initial design by the optical design software. As a result, the designed zoom lens shows satisfactory performances in wavelength range of 450 to 900 nm as a focusing element in an imaging spectrometer. Furthermore, the collimator lens of the imaging spectrometer is designed through the third-order aberration correction by using an iterative process.

• Structural Engineering and Mechanics
• /
• 제58권2호
• /
• pp.347-378
• /
• 2016

Within the scope of the plane-strain state, by utilizing the three-dimensional linearized theory of elastic waves in initially stressed piezoelectric and elastic materials, Lamb wave propagation and the influence of the initial stresses on this propagation in a sandwich plate with pre-stressed piezoelectric face and pre-stressed metal elastic core layers are investigated. Dispersion equations are derived for the extensional and flexural Lamb waves and, as a result of numerical solution to these equations, the corresponding dispersion curves for the first (fundamental) and second modes are constructed. Concrete numerical results are obtained for the cases where the face layers' materials are PZT-2 or PZT-6B, but the material of the middle layer is Steel (St) or Aluminum (Al). Sandwich plates PZT-2/St/PZT-2, PZT-2/Al/PZT-2, PZT-6B/St/PZT-6B and PZT-6B/Al/PZT-6B are examined and the influence of the problem parameters such as piezoelectric and dielectric constants, layer thickness ratios and third order elastic constants of the St and Al on the effects of the initial stresses on the wave propagation velocity is studied.

• Structural Engineering and Mechanics
• /
• 제56권3호
• /
• pp.491-506
• /
• 2015

Propagation of the generalized Rayleigh waves in an initially stressed elastic half-space covered by an elastic layer is investigated. It is assumed that the initial stresses are caused by the uniformly distributed normal compressional forces acting on the face surface of the covering layer. Two different cases where the compressional forces are "dead" and "follower" forces are considered. Three-dimensional linearized theory of elastic waves in initially stressed bodies in plane-strain state is employed and the elasticity relations of the materials of the constituents are described through the Murnaghan potential where the influence of the third order elastic constants is taken into consideration. The dispersion equation is derived and an algorithm is developed for numerical solution to this equation. Numerical results for the dispersion of the generalized Rayleigh waves on the influence of the initial stresses and on the influence of the character of the external compressional forces are presented and discussed. These investigations provide some theoretical foundations for study of the near-surface waves propagating in layered mechanical systems with a liquid upper layer, study of the structure of the soil of the bottom of the oceans or of the seas and study of the behavior of seismic surface waves propagating under the bottom of the oceans.

• 한국재료학회지
• /
• 제31권7호
• /
• pp.382-385
• /
• 2021

Well-crystallized vanadium pentoxide V₂O₅ thin films are fabricated on MgO single crystal substrates by using pulsed-laser deposition technique. The linear optical transmission spectra are measured and found to be in a wavelength range from 300 to 800 nm; the data are used to determine the linear refractive index of the V₂O₅ films. The value of linear refractive index decreases with increasing wavelength, and the relationship can be well explained by Wemple's theory. The third-order nonlinear optical properties of the films are determined by a single beam z-scan method at a wavelength of 532 nm. The results show that the prepared V₂O₅ films exhibit a fast third-order nonlinear optical response with nonlinear absorption coefficient and nonlinear refractive index of 2.13 × 10^-10 m/W and 2.07 × 10^-15 cm²/kW, respectively. The real and imaginary parts of the nonlinear susceptibility are determined to be 3.03 × 10^-11 esu and 1.12 × 10^-11 esu, respectively. The enhancement of the nonlinear optical properties is discussed.

• 한국정보시스템학회지:정보시스템연구
• /
• 제25권3호
• /
• pp.1-30
• /
• 2016

Purpose The purpose of this study is to grasp the factors influencing domestic SNS users' privacy protection behavior and verify their relationship through self-efficacy and responsiveness. Thus, this study tries to suggest efficient and effective measures for SNS personal information protection. Design/methodology/approach To this end, with main variables of the protection motivation theory based on the assumption that when users are exposed to the threat to their health, they would have protection motivation and change their behavior of protecting their health, a research model was suggested. In addition, in order to empirically verify the research model, a survey was performed targeting general college students having the experience of using SNS. Findings As a result of the analysis, first, perceived effectiveness and self-efficacy had a positive effect on responsiveness. Second, perceived barrier had a positive effect on self-efficacy. Third, self-efficacy and responsiveness had a positive effect on privacy protection behavior. This study is expected to contribute to establishing an effective guideline for measures that could induce SNS users' privacy protection behavior.

• 한국의류학회지
• /
• 제41권3호
• /
• pp.433-445
• /
• 2017

This study uses a macro-viewpoint to investigate how female world leaders' clothing behaviors are different by nation and culture. This study conducted a comparative study on clothing behavior by cultural block in order to understand similarities and differences based on Hofstede's cultural dimensions theory. The findings are as follows. First, the clothing styles of female world leaders are categorized into classical suit style, national traditional style, and eclectic style. Second, classic suit style is more often found in countries characterized by high individualism, low power distance index, and low avoidance index. The style represents individual activity and rationality as well as trust towards women acting in men's roles. Third, a national traditional style is found in countries featuring high collectivism, high power distance index, and high uncertainty avoidance index. These countries share a culture that emphasizes harmony with the whole, rather than any one given part; consequently, clothing style represents a national identity (or the roles as a national member) rather than that of the individual level. Fourth, an eclectic clothing style is expressed in a mixture of classical suits and a national traditional style that depends on how much Eastern and Western cultures are reasonably compromised or Eastern tradition and Western culture coexist.