• The Korean Journal of Air & Space Law and Policy
• /
• v.19 no.1
• /
• pp.9-35
• /
• 2004

A launching State shall be absolutely liable to pay compensation for damage caused by its space object on the surface of the earth or to aircraft in flight. The compensation which the launching State shall be liable to pay for damage under "the Convention on International Liability for Damage caused by Space Objects" shall be determined in accordance with international law and the principles of justice and equity, in order to provide such reparation in respect of the damage as will restore the person, natural or juridical, State or international organisation on whose behalf the claim is presented to the condition which would have existed if the damage had not occurred. In the event of damage being caused elsewhere than on the surface of the earth to a space object of one launching State or to persons or property on board such a space object by a space object of another launching State, and of damage thereby being caused to a third State or to its natural or juridical persons, the first two States shall be jointly and severally liable to the third State, to the extent indicated by the following: If the damage has been caused to the third State on the surface of the earth or to aircraft in flight, their liability to the third State shall be absolute; If the damage has been caused to a space object of the third State or to persons or property on board that space object elsewhere than on the surface of the earth, their liability to the third State shall be based on the fault of either of the first two States or on the fault of persons for whom either is responsible. The Insurance requirements are satisfied for a launch or return authorised by a launch permit if the holder of the permit or authorisation is insured against any liability that the holder might incur to pay compensation for any damage to third parties that the launch or return causes; and the Commonwealth is insured against any liability that Commonwealth might incur, under the Liability Convention or otherwise under international law, to pay compensation for such damage. The liability for Damage caused by Space Objects should be regulated in detail in Korea.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.56-66
• /
• 2010

This study proposes a thesis of architectural concepts and visual dimension systems, and the comparison between steps of spatial formation and dimensional alteration. The second chapter, to form the basis of this study, explains the dimensional alterations and changes of fundamental notion of space. In the third chapter, history of space, architectural formations, and changes of the viewpoint are analyzed as objects of study. The forth chapter presents the interrelation between dimensional alteration and the transition in fundamental notion of space, demonstrating that modern architecture has been born from these cultural movements. Lastly, the fifth chapter suggests possibilities on further studies and the following conclusions: First, architectural spaces have been changed, in accordance with the changes of culture, art and the tools that regulate architectural design. Proportional regulations by two-dimensional tools and depth through three-dimensional drawings are created. Second, architectural spaces gained depth by recognizing movement and time that have induced formations to change, creating various aesthetic backgrounds and attempts. Third, the aesthetic background and cosmologic spatial concept have led the visualization and changes of architectural experience. It created the design tools and shapes originated in dynamism and vitality. Forth, diversification of fundamental spatial concepts has become palimpsest and complex, and been divided into four dimensions; expressional two-dimensional space, perspective three-dimensional space, forth-dimensional space of time and experience, and imagery space formed by body movement. Fifth, architecture has been influenced by the elevated viewpoint that understands the whole world as a space. It has evolved from the two-dimensional proportion principle, change of depth and vanishing point to multidimensional space of movement and time. Sixth, changes of fundamental notion of space have arisen from changes of visual dimensions in times. In other words, space has been developed from two-dimensional space to multidimensional space by accepting visual dimension, grasping distance, direction, depth, height, velocity, movement, gravity, power and structure.

• Korean Institute of Interior Design Journal
• /
• v.21 no.3
• /
• pp.111-118
• /
• 2012

The purpose of this study is to focus on living rooms that are preferred as a place for changing space image to the maximum and to find a method how finishing materials are expressed by selecting space with mix & match of many images. The study methods are as follows. First, understand the expressive trend of space images through the precedent studies and magazines, and examine its relationship with finishing materials. Second, select space images based on the contents understood earlier and extract adjective words that represent each space image through an expert survey. Third, find the cases where space images are expressed based on the extracted words and analyze expression methods of finishing materials. The results of the study are as follows. First, it was confirmed that recent space images are actively expressed through finishing materials. Second, space images selected through data related to the trend were classified as modern+natural, modern+traditional, modern+retro, classic+natural, classic+humor, and futurism+natural and 4 adjective words for each space image were extracted. Third, expressive elements of finishing materials were extracted as 'material'. 'texture', 'color', and 'pattern' through the precedent studies. Fourth, expressive methods of finishing materials for each space image could be suggested by analyzing the examples that show mix & match based on the contents extracted earlier. Lastly, it is expected to find various methods that lead space image into finishing materials by evaluating responses and changes in visual perception of residents according to expression of finishing materials based on this study.

• Journal of Plant Biology
• /
• v.13 no.1
• /
• pp.56-64
• /
• 1970

The present experiments differning from that conducted by agriculturists with the first consideration of food or seed production were performed in order to investigate the density effect on dry matter production in the artified population of maize. Three experimental plots were established and one seed was sown in the first plot, 2 seeds in the second plot and 3 seeds in the third plot, respectively. The space of each ridge was designed with 30cm in width and 50cm in length. The space of each seed was 4cm and the growth amount by density was measured through three times. The results obtained are as follows: 1) The total growth amount per unit area was in the order of the third, second and first plots until the second sampling. At the third sampling the whole plots showed almost the same growth amount except the first plot which showed a slightly smaller amount. 2) The growth amount per individual plant was in the order of the third, second and first plots until the second sampling, while the first plot showed drastic growth compared with the other two plots at the third sampling. 3) The growth amount by each organ(leaf, stem and root) of the plant body was markedly abundant in the stem of the non-productive part compared with that in the leaf of the productive part. Especially the root was affected remarkably by density and the first plot showed an abundant growth in comparison with the other plots which were too poor to resist the gound surface.

• Structural Engineering and Mechanics
• /
• v.3 no.2
• /
• pp.121-133
• /
• 1995

It is well known that two-dimensional simplified third-order theories satisfy the layer interface continuity of transverse shear strains, thus these theories violate the continuity of transverse shear stresses when two consecutive layers differ either in fibre orientation or material. The third-order theories considered herein involve four/or five dependent unknowns in the displacement field and satisfy the condition of vanishing of transverse shear stresses at the bounding planes of the plate. The objective of this investigation is to examine (i) the flexural response prediction accuracy of these third-order theories compared to exact elasticity solution (ii) the effect of layer interface continuity conditions on the flexural response. To investigate the effect of layer interface continuity conditions, three-dimensional elasticity solutions are developed by enforcing the continuity of different combinations of transverse stresses and/or strains at the layer interfaces. Three dimensional twenty node solid finite element (having three translational displacements as degrees of freedom) without the imposition of any of the conditions on the transverse stresses and strains is also employed for the flexural analysis of the laminated plates for the purposes of comparison with the above theories. These shear deformation theories and elasticity approaches in terms of accuracy, adequacy and applicability are examined through extensive numerical examples.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.1
• /
• pp.3-32
• /
• 2008

In proportion to recent developments in aviation technology and growth of the air transport market, the risk of damages to third parties caused by aircrafts and the likelihood of unlawful interference on an aircraft in flight has grown larger. The war risk insurance market was paralyzed by the 9/11 terror event. And if another event on the scale of 9/11 occurs, compensations for third party damages will be impossible. Recognizing the need to modernize the existing legal framework and the absence of a globally accepted authority that deals with third party liability and compensation for catastrophic damage caused by acts of unlawful interference, the ICAO and various countries have discussed a liability and compensation system that can protect both third party victims and the aviation industry for the 7 years. In conclusion, in order to provide adequate protection for victims and the appropriate protection for air transport systems including air carriers, work on modernizing the Rome Convention should be continued and the new Convention should be finalized in the near future. Korea has not ratified the relevant international treaties, i.e. Rome Convention 1933, 1952 and 1978, and has no local laws which regulate the damage caused by aircraft to third parties on land. Consequently, it has to depend on the domestic civil tort laws. Most of the advanced countries in aviation such as the United States, England, Germany, France and even China, have incorporated the International Conventions to their national air law and governed carriers third party liability within their jurisdiction. The Ministry of Justice organized the Special Enactment Committee for Air Transport chapter under Commercial Law. The Air Transport chapter, which currently includes third party liability, is in the process of instituting new legislation. In conclusion, to settle such problems through local law, it is necessary to enact as soon as possible domestic legislation on the civil liability of the air carrier which has been connected with third party liability and aviation insurance.

• Journal of the Korean Institute of Educational Facilities
• /
• v.19 no.6
• /
• pp.3-14
• /
• 2012

University campus has grown and developed along with history of human in connection with transition characteristics of city. In particular, reflecting the features in the times, the masterplan should explore its main roles today when international growth of university is pursued. In particular, center core and quad space, focusing on main components of campus such as main building, student union hall and main lecture facility, are the prototype of campus components and have been pursued to have importance in terms of shape and function as traditional campus space strategy. Recently, however, new strategy has been proposed to explore orders of campus utilizing the underground space focusing on main universities. Design of Hana Plaza of Korea University and Bekyangro of Yeonsei University, the targets of this study, actively explore this strategy. This study analyzed such strategies in terms of concept of space to obtain space, design trend of main universities at home and abroad, and viewpoint of integrated masterplan proposal. Conclusions from this study are as follows. First, concept of quad and center space found in the design of traditional campus is reinterpreted into new design aspects through development of underground space. Second, development of underground space is approached to overcome the limit of existing campus and to present the vision of universities 100 years ahead. Third, ever-changing complicated urban environment has been reflected in space configuration of campus and positioned as strategy to implement this as modern construction technique. Third, implementation of pedestrian-oriented campus has been pursued by reinforcing utilization of inclined topography of urban environment in Korea. This enables to obtain spaces for main activities of students and to implement the space where student support facilities are concentrated and activities are performed actively. Such features can be presented as conclusions of this study.

• Journal of the Korean Mathematical Society
• /
• v.52 no.1
• /
• pp.23-41
• /
• 2015

We present a semilocal convergence analysis of a third order method for approximating a locally unique solution of an equation in a Banach space setting. Recently, this method was studied by Chun, Stanica and Neta. These authors extended earlier results by Kou, Li and others. Our convergence analysis extends the applicability of these methods under less computational cost and weaker convergence criteria. Numerical examples are also presented to show that the earlier results cannot apply to solve these equations.

• The Journal of the Korean dental association
• /
• v.57 no.11
• /
• pp.654-663
• /
• 2019

This case report describes the management of a 30-year-old woman with hopeless mandibular first molars and right maxillary second premolar. The treatment plan included mandibular second and third molar protraction after extraction of mandibular first molars. Mini-implants were placed between roots of first and second premolar. Sliding mechanics with lever arm was used to prevent inclination of molars. A good functional occlusion was achieved in 38 months without clinically significant side effects. Most of the extraction space of mandibular first molar was closed by protraction of second and third molars. The skeletal Class II pattern was improved by counterclockwise rotation of mandible through reduction of wedge effect. Mandibular molar protraction with orthodontic mini-implants in adequate cases would be a great alternative to prosthetic implant and reduce the financial and surgical burden of patients.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.75-75
• /
• 2003

All published and newly observed times of minimum light of the massive, early-type eclipsing binary star AH Cep were analyzed. After subtracting the light time effect due to the well-known third body from the residuals of the observed times of minimum light, it was found that the second-order Ο-C residuals varied in a cyclical way. It was assumed that the secondary oscillations were produced by a light time effect due to a fourth body so all the times of minimum light were reanalyzed with a differential least-squares scheme in order to obtain the light time orbits due to both the third and fourth bodies. The periods, eccentricities, semi-amplitudes of the light time orbits for the third and fourth-bodies were derived as : P$\_$3/=68.$\^$y/3 and P$\_$4/=9.$\^$y/3, e$_3$=0.53 and e$_4$=0.83, K$_3$=0.$\^$d/0585 and K$_4$=0.$\^$d/0045, respectively. The analysis of the radial velocities of AH Cep published so far, do not conflict with the hypothesis of the multiplicity of the system but their accuracies are not high enough to be useful to support the interpretation. Other properties of the distant bodies are discussed for assorted possible inclinations of their orbits.